Skip to content
Tutorials Center
My learning

Topics

Lesson 47 of 48 · Projects and Practice

Cheat sheet: chapters 5 to 8 on one page

One-page recap of the key formulas, typical values and unit conversions for hydraulics, transportation, geotechnical and environmental design.

When you are solving a problem and need an equation fast, a good cheat sheet saves minutes. This lesson collects every formula from the hydraulics, transportation, geotechnical and environmental chapters in one place, together with typical values and the unit conversions that trip people up. Print it, copy it, or rebuild it yourself from memory as a revision exercise.

A poster of eight cards with the main formulas for pressure, pipes, channels, runoff, traffic, geometry, soil and foundations.
The whole course in eight cards. If you can derive each line, you understand the chapter.

What you will learn

  • Where to find each formula quickly.
  • The typical values worth memorizing.
  • The unit conversions that cause most mistakes.

Key terms

Formula sheet: a compact list of equations with symbols and units. Typical value: a commonly used number for a property, to be replaced by project data when available. Unit conversion: changing a quantity from one unit to another without changing its size. Order of magnitude: a rough size estimate, used to catch big errors. Dimensional check: verifying that both sides of an equation have the same dimensions.

Formulas

Topic Formula Units
Hydrostatic pressure p = ρ g h Pa, kg/m³, m/s², m
Force on a vertical wall F = ½ ρ g H² b at H/3 N, m
Continuity Q = A v m³/s, m², m/s
Bernoulli p/γ + v²/2g + z = const m
Friction loss h_f = f (L/D) v²/2g m
Reynolds number Re = v D / ν none
Manning Q = A R^(2/3) S^(1/2) / n m³/s
Froude number Fr = v / √(g A/T) none
Rational method Q = C i A / 360 m³/s, mm/h, ha
SCS runoff S = 25400/CN − 254, Q = (P − 0.2S)²/(P + 0.8S) mm
Traffic flow q = k v veh/h, veh/km, km/h
Greenshields q_max = v_f k_j / 4 at k_j / 2 veh/h
SSD 0.278 V t + V²/(254(a/9.81 + G)) m
Horizontal curve e + f = V² / (127 R) none, km/h, m
ESAL factor (axle / 80 kN)⁴ none
Phase relations e = V_v/V_s, S e = w G_s none
Unit weights γ_sat = (G_s + e) γ_w/(1 + e) kN/m³
Effective stress σ′ = σ − u kPa
Consolidation S_c = C_c H/(1+e₀) log₁₀((σ′₀+Δσ)/σ′₀) m
Time t = T_v H_dr² / c_v years
Mohr-Coulomb τ_f = c′ + σ′ tan φ′ kPa
Bearing q_u = c N_c + q N_q + ½ γ B N_γ kPa
Rankine K_a = tan²(45° − φ/2), P_a = ½ K_a γ H² kN/m
BOD BOD_t = L₀ (1 − e^(−kt)) mg/L
Stokes v_s = g(ρ_p − ρ)d²/(18μ) m/s
Detention V = ½ T_b (Q_p − Q_o)² / Q_p m³
Embodied carbon Σ mass × factor kg CO₂e

Typical values worth knowing

Quantity Value
Water density, specific weight 1000 kg/m³, 9.81 kN/m³
Atmospheric pressure about 101.3 kPa
Manning n 0.013 concrete, 0.022 clean earth, 0.035 natural stream
Runoff coefficient C 0.9 paving, 0.3 residential, 0.2 lawn
Design perception-reaction time 2.5 s
Standard axle 80 kN
Specific gravity of soil grains about 2.65 to 2.75
Friction angle of sand roughly 30° to 40°
Factor of safety about 3 for bearing, 1.5 sliding, 2 overturning
Concrete unit weight about 24 kN/m³
Warm-water oxygen at 20 °C about 9.1 mg/L (saturation)

Unit conversions that matter

  • 1 L/s = 0.001 m³/s; 1 m³/s = 1000 L/s.
  • 1 km/h = 0.278 m/s; 1 m/s = 3.6 km/h.
  • 1 ha = 10,000 m²; 1 mm of rain on 1 ha = 10 m³.
  • 1 kPa = 1 kN/m²; 1 MPa = 1000 kPa.
  • 1 bar = 100 kPa; about 10.2 m of water per bar.
  • 1 kN = 1000 N; 1 t (tonne) = 1000 kg, weighing about 9.81 kN.

How to use the sheet

Find the row that matches the question, check the symbols against your givens, and convert units first. Then ask whether the answer is sensible: if the water pressure in a tank comes out in MPa, or a culvert needs a 10 m pipe, something is off by a factor, usually a unit.

Common misconceptions

"A cheat sheet replaces understanding." The formulas hide assumptions: Manning is for uniform flow, Rankine for smooth walls, Greenshields for a simple model. Know them.

"Typical values are exact." They are starting points. Real projects use measured or specified data.

"Units can be fixed at the end." Convert before substituting; mixing km/h and m/s inside one formula gives silent errors.

Try it

A unit converter you can adapt, and a formula picker that suggests the right equation from a keyword.

JS Unit converter

Press Run (or Ctrl + Enter) to see the console output here.

No output.

JS Formula picker

Press Run (or Ctrl + Enter) to see the console output here.

No output.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. 1 mm of rain falling on 1 hectare is

    10,000 m² × 0.001 m = 10 m³.
  2. 2. 120 km/h in m/s is

    120 / 3.6 = 33.3 m/s.
  3. 3. Which equation is for a free-surface gravity flow with uniform conditions?

    Manning's equation applies to uniform open channel flow.
  4. 4. The standard axle for ESAL calculations is

    An 80 kN (18,000 lb) single axle is the reference.

Summary

  • One page can hold the course's formulas; knowing their assumptions matters more than memorizing them.
  • Typical values are starting points and should be replaced by project data.
  • Convert units before substituting.
  • Sanity-check every answer for size.

Next: Further study: where to go from here