Skip to content
Tutorials Center
My learning

Topics

Electric Power Systems Tutorial

Learn Electric Power Systems step by step: 47 lessons in 9 chapters with examples, quizzes, diagrams and practice.

Start learning →

of lessons completed

Getting Started

  1. 1 Course Map: Welcome to Electric Power Systems Meet the electric power system: who this course is for, what you need first, how to study it, and a map of all nine chapters from generators to smart grids.
  2. 2 The Grid at a Glance: From Power Plant to Socket Follow electricity from generator to socket: voltage levels, the roles of transmission and distribution, why high voltage saves energy, and how loads shape the system.
  3. 3 Three-Phase Power: Wye, Delta and Balanced Systems Learn why the grid is three-phase, how wye and delta connections relate line and phase quantities, and how to solve a balanced system on a single-phase basis.
  4. 4 Real, Reactive and Apparent Power Understand P, Q and S, the power triangle and power factor, and learn to size capacitors for power-factor correction with worked numeric examples.
  5. 5 Chapter 1 Review: Getting Started Review the grid path, three-phase relations and the power triangle with a recap table, a one-page poster, a practice calculator and a ten-question quiz.

Generation and the Grid

  1. 6 Chapter 2 Overview: Generation and the Grid Preview chapter 2: how power plants, synchronous generators, load curves and transformers work together to meet demand, with a slide overview and lesson guide.
  2. 7 Synchronous Generators: From Shaft to Three-Phase Voltage Learn how a synchronous generator works: speed and frequency, the per-phase equivalent circuit, excitation and reactive power, and the power-angle equation.
  3. 8 Load Curves and Power Plants: Matching Supply to Demand Read daily load curves and load duration curves, compute load factor and capacity factor, and see how a merit-order stack of plants meets demand at least cost.
  4. 9 Transformers: Ratio, Equivalent Circuit and Efficiency Learn how transformers change voltage: the ideal model, impedance reflection, the equivalent circuit, voltage regulation, efficiency and three-phase connections.
  5. 10 Chapter 2 Review: Generation and the Grid Review synchronous generators, load curves, capacity factor, merit order and transformers with a one-page poster, recap table, flash cards and a ten-question quiz.

Transmission Lines

  1. 11 Chapter 3 Overview: Transmission Lines Preview chapter 3 on transmission lines: overhead lines, cables and HVDC, the physical parts of a line, conductor sag, and how R, L and C enter the models.
  2. 12 Line Parameters: Resistance, Inductance and Capacitance Calculate the resistance, inductance and capacitance of a three-phase transmission line from its geometry using GMD, GMR and bundled conductors, with a worked 400 kV example.
  3. 13 Short and Medium Lines: Series Model, Nominal Pi and ABCD Model short and medium transmission lines with the series impedance and nominal pi circuits, use ABCD constants, and compute voltage regulation, losses and efficiency.
  4. 14 Long Lines and Surge Impedance Loading Model long transmission lines with distributed parameters, understand the propagation constant, characteristic impedance, the Ferranti effect and surge impedance loading.
  5. 15 Chapter 3 Review: Transmission Lines Review line parameters, short, medium and long line models, voltage regulation, the Ferranti effect and SIL with a poster, recap table, calculator and ten-question quiz.

Per-Unit Analysis and Load Flow

  1. 16 Chapter 4 Overview: Per-Unit Analysis and Load Flow Preview chapter 4: why engineers use the per-unit system, how to build the bus admittance matrix and what a load-flow study computes, with a slide overview.
  2. 17 The Per-Unit System: Bases, Change of Base and Transformers Learn the per-unit system step by step: choosing Sbase and Vbase, deriving Ibase and Zbase, changing bases, and analyzing a multi-voltage network on one base.
  3. 18 The Bus Admittance Matrix (Ybus) and Power Injections Build the bus admittance matrix Ybus of a power network by inspection, understand its properties, and use it to compute bus power injections and line flows.
  4. 19 Newton-Raphson Load Flow: Bus Types, Jacobian and DC Approximation Learn load flow: slack, PV and PQ buses, the power-flow equations, the Newton-Raphson iteration with the Jacobian, a 3-bus example solved in Python, and the DC approximation.
  5. 20 Chapter 4 Review: Per-Unit Analysis and Load Flow Review the per-unit system, change of base, the bus admittance matrix, bus types and Newton-Raphson load flow with a poster, recap table, solver and ten-question quiz.

Faults and Protection

  1. 21 Chapter 5 overview: faults and protection Why short circuits happen, what they do to equipment, and how zones of protection, relays and circuit breakers isolate a fault in a few cycles.
  2. 22 Symmetrical components Learn Fortescue's method: split unbalanced three-phase voltages and currents into positive, negative and zero sequence sets, with worked examples and a live calculator.
  3. 23 Fault types and fault current calculation Calculate three-phase, line-to-ground, line-to-line and double line-to-ground fault currents by connecting sequence networks, with a worked per-unit example and asymmetry factors.
  4. 24 Relays, breakers and coordination Learn how overcurrent, distance and differential relays detect faults, how circuit breakers interrupt them, and how to set inverse-time relays so they coordinate.
  5. 25 Chapter 5 review: faults and protection Review sequence components, fault current calculation, relays, breakers and coordination with a one-picture summary, a recap table, a breaker rating check and a ten-question quiz.

Stability and Control

  1. 26 Chapter 6 overview: stability and control Meet the three classical stability problems of a power grid, rotor angle, frequency and voltage, and the controls that keep a system running after a disturbance.
  2. 27 The swing equation and the equal-area criterion Derive the swing equation, plot the power-angle curve, apply the equal-area criterion to find the critical clearing angle and time, and compute the natural swing frequency.
  3. 28 Frequency control Understand how inertia, governor droop, AGC and reserves hold the grid frequency after a generator trips or the load jumps, with a full time-domain simulation.
  4. 29 Voltage and reactive power control Learn why voltage follows reactive power, how the P-V nose curve limits transfer, and how generators, capacitors, tap changers, SVCs and STATCOMs keep voltage in range.
  5. 30 Chapter 6 review: stability and control Review the swing equation, equal-area criterion, frequency control and voltage stability with a cheat sheet, a recap table, a stability dashboard calculator and a ten-question quiz.

Renewables and Storage

  1. 31 Chapter 7 overview: renewables and storage See how wind, solar and batteries change a power system: variable output, inverter-based interfaces and the duck curve, plus a map of the chapter's lessons.
  2. 32 Solar and wind power Learn how a solar module and a wind turbine convert energy to electricity: I-V curves, MPPT, temperature effects, the cube law, the Betz limit, Weibull statistics and capacity factor.
  3. 33 Inverter-based resources and grid codes Understand how solar, wind and batteries connect through inverters: PLL control, grid-forming control, fault ride-through, limited fault current, weak grids and falling inertia.
  4. 34 Energy storage Compare grid storage technologies by power, energy and efficiency, learn the services storage provides, and size a battery with a linear-programming arbitrage model.
  5. 35 Chapter 7 review: renewables and storage Review solar, wind, inverter-based resources and storage with a cheat sheet, a recap table, a hybrid-plant energy calculator and a ten-question quiz.

Smart Grids and Economics

  1. 36 Chapter 8 overview: smart grids and economics See how sensors, communications, markets and prices turn a one-way power system into a smart grid, and what economic dispatch, markets and demand response add.
  2. 37 Economic dispatch Learn to share load among generators at least cost: cost curves, the equal incremental cost rule, lambda iteration with limits, penalty factors for losses and unit commitment.
  3. 38 Electricity markets and demand response Learn how wholesale electricity markets clear with the merit order, how locational prices reveal congestion, how demand response lowers prices, and how to compare costs with LCOE.
  4. 39 Smart grid technology and microgrids Explore smart meters, SCADA, synchrophasors, distribution automation, reliability indices and microgrids with droop sharing, islanding and hierarchical control.
  5. 40 Chapter 8 review: smart grids and economics Review economic dispatch, electricity markets, demand response, smart grid technology and microgrids with a cheat sheet, a revenue-versus-cost exercise and a ten-question quiz.

Projects and Practice

  1. 41 Chapter 9 overview: projects and practice A guide to the final chapter: how to structure an engineering calculation, which checks catch mistakes, typical numbers for plausibility, and what each project and practice set covers.
  2. 42 Project 1: fault study of a three-bus system Run a complete short-circuit study: build the bus admittance and impedance matrices, compute fault currents and voltages, check breaker ratings and test network changes.
  3. 43 Project 2: sizing a solar-battery-diesel microgrid Simulate a day of a solar, battery and diesel microgrid, sweep PV and battery sizes, estimate annual cost, fuel use and renewable share, and check how long critical loads can be served.
  4. 44 Practice problems: faults, stability, renewables and economics Twelve worked-out practice problems on sequence components, faults, relays, stability, frequency, voltage, solar, wind, storage, dispatch and reliability, with a solution calculator.
  5. 45 Glossary of chapters 5 to 8 Forty-two key terms of faults and protection, stability and control, renewables and storage, and smart grids and economics, with short definitions and a searchable glossary.
  6. 46 Cheat sheet: formulas for chapters 5 to 8 One page of the key formulas, constants and typical values for faults, protection, stability, frequency, voltage, renewables, storage, dispatch and reliability, with a runnable formula library.
  7. 47 Further study: where to go after power systems Plan your next steps in power engineering: neighboring tracks on this site, classic textbooks and standards, open-source tools, open research problems and a simple self-assessment.