Skip to content
Tutorials Center
My learning

Topics

Circuit Analysis Tutorial

Learn Circuit Analysis step by step: 48 lessons in 9 chapters with examples, quizzes, diagrams and practice.

Start learning →

of lessons completed

Getting Started

  1. 1 Course Map: How This Circuit Analysis Course Works Start here: who the course is for, what you need to know first, how the nine chapters fit together, and how to study circuit analysis effectively.
  2. 2 What Is an Electric Circuit? Learn what makes a circuit: a source, a closed conducting path and a load. See open and closed circuits, series and parallel layouts, and short circuits.
  3. 3 Units and Metric Prefixes in Electronics Master the SI units of electronics (volt, ampere, ohm, watt) and the metric prefixes from pico to giga, with engineering notation and unit checking.
  4. 4 Reading Circuit Schematics Learn the standard symbols for resistors, capacitors, sources and switches, how to read wire junctions, ground and labels, and how to list a circuit as a netlist.
  5. 5 Chapter 1 Review: Getting Started Review circuits, units and prefixes, and schematic symbols with a one-picture summary, a recap table and a ten-question quiz before moving on to voltage and current.

Charge, Voltage, Current and Elements

  1. 6 Chapter 2 Overview: Charge, Voltage, Current and Elements A big-picture tour of charge, current, voltage, power and ideal circuit elements, with a slide deck, a hero illustration and a map of the chapter's lessons.
  2. 7 Charge and Current Understand electric charge, the coulomb, the ampere, conventional current direction, why electrons drift slowly, and how charge is the area under a current graph.
  3. 8 Voltage, Energy and Power Learn voltage as energy per charge, how node voltages and ground work, and how to calculate electrical power and energy in watts, joules and kilowatt-hours.
  4. 9 Sources, Passive Elements and the Sign Convention Learn ideal voltage and current sources, dependent sources, the passive sign convention for absorbing or supplying power, and conservation of power in circuits.
  5. 10 Chapter 2 Review: Charge, Voltage, Current and Elements Chapter 2 cheat sheet and ten-question quiz: charge, current, voltage, power, energy, ideal sources, the passive sign convention and conservation of power.

Resistive Circuits and Ohm's Law

  1. 11 Chapter 3 Overview: Resistive Circuits and Ohm's Law A map of Chapter 3: Ohm's law, series and parallel resistors, voltage and current dividers and series-parallel reduction, with a slide deck and hero illustration.
  2. 12 Ohm's Law and Resistors Learn Ohm's law V = I·R, the V-I graph, power forms, conductance, wire resistance, resistor color codes and why some devices do not obey the law.
  3. 13 Series Resistors and the Voltage Divider Add resistors in series, find the shared current, split a voltage with the divider rule, design a divider, and see how a load changes the output.
  4. 14 Parallel Resistors and the Current Divider Combine resistors in parallel with conductances, use product over sum for two resistors, split a current with the divider rule, and see why house wiring is parallel.
  5. 15 Series-Parallel Reduction Solve mixed resistor networks by collapsing parallel pairs and series chains, then working back out. Includes a reduction program and the bridge circuit that will not reduce.
  6. 16 Chapter 3 Review: Resistive Circuits and Ohm's Law Review Ohm's law, series and parallel resistors, voltage and current dividers and series-parallel reduction with a cheat sheet, worked example and ten-question quiz.

Kirchhoff's Laws and Nodal Analysis

  1. 17 Chapter 4 Overview: Kirchhoff's Laws and Nodal Analysis A map of Chapter 4: Kirchhoff's current and voltage laws and the two systematic methods, nodal and mesh analysis, that solve any linear resistive circuit.
  2. 18 Kirchhoff's Current Law (KCL) Learn Kirchhoff's current law: the sum of currents at a node is zero. Practice sign conventions, find unknown currents and solve a one-node problem.
  3. 19 Kirchhoff's Voltage Law (KVL) Learn Kirchhoff's voltage law: voltages around a closed loop sum to zero. Walk a loop, handle signs, find unknown voltages and see why voltage is path independent.
  4. 20 Nodal Analysis Solve circuits with nodal analysis: choose a reference node, write KCL with node voltages, use conductance matrices, and handle supernodes and dependent sources.
  5. 21 Mesh Analysis Solve circuits with mesh analysis: assign clockwise loop currents, write KVL for each mesh, handle shared resistors, supermeshes and a three-mesh ladder.
  6. 22 Chapter 4 Review: Kirchhoff's Laws, Nodal and Mesh Analysis Review KCL, KVL, nodal analysis and mesh analysis with a side-by-side cheat sheet, a worked comparison of both methods and a ten-question chapter quiz.

Network Theorems

  1. 23 Chapter 5 Overview: Network Theorems A map of the four big shortcuts in circuit analysis: superposition, Thévenin, Norton and maximum power transfer, and why linearity makes them work.
  2. 24 Superposition Learn the superposition theorem step by step: switch off sources correctly, add the partial answers, and see why power cannot be superposed.
  3. 25 Thévenin's Theorem Replace any linear network with one voltage source and one resistor. Find Vth and Rth step by step, check the answer, and see why it saves work.
  4. 26 Norton's Theorem and Source Transformation Norton's theorem replaces a network with a current source and a parallel resistor. Learn the conversion to Thévenin form and the source-transformation trick.
  5. 27 Maximum Power Transfer Find the load that draws the most power from a source. Derive RL = Rth with calculus, compute efficiency, and learn when matching is the wrong goal.
  6. 28 Chapter 5 Review: Network Theorems Review superposition, Thévenin, Norton and maximum power transfer with a summary picture, a recap table, a toolkit script and a ten-question quiz.

Capacitors, Inductors and Transients

  1. 29 Chapter 6 Overview: Capacitors, Inductors and Transients Meet the two circuit elements with memory, learn why voltage or current cannot jump, and get a map of first-order and second-order transient analysis.
  2. 30 Capacitors and Inductors Learn i = C dv/dt and v = L di/dt, stored energy, DC behavior and series and parallel combinations with worked numeric examples and a live plot.
  3. 31 RC and RL Transients Solve first-order circuits with the three-number method: initial value, final value and time constant. Worked RC and RL examples and charging plots.
  4. 32 Series RLC Circuits: Second-Order Transients Understand second-order circuits: the damping ratio, natural frequency, and the three step responses of a series RLC circuit with worked numbers and plots.
  5. 33 Chapter 6 Review: Capacitors, Inductors and Transients Review capacitor and inductor laws, first-order time constants and second-order damping with a summary picture, a recap table, a script and a ten-question quiz.

AC Circuits and Phasors

  1. 34 Chapter 7 Overview: AC Circuits and Phasors A map of AC circuit analysis: why sinusoids matter, how phasors turn calculus into algebra, and how impedance extends Ohm's law to capacitors and inductors.
  2. 35 Sinusoids and Phasors Describe AC signals with amplitude, frequency and phase, compute RMS values, and convert between time-domain sinusoids and phasors with worked examples.
  3. 36 Impedance and AC Circuit Analysis Extend Ohm's law to capacitors and inductors with complex impedance. Combine series and parallel elements and solve AC circuits with worked examples.
  4. 37 AC Power: Real, Reactive and Apparent Understand instantaneous and average AC power, the power triangle, complex power and power-factor correction with a full worked example and live plots.
  5. 38 Chapter 7 Review: AC Circuits and Phasors Review sinusoids, phasors, impedance and AC power with a summary picture, a complete mixed example, a calculator widget and a ten-question quiz.

Frequency Response and Resonance

  1. 39 Chapter 8 Overview: Frequency Response and Resonance See how circuits treat different frequencies differently: transfer functions, decibels, filters and resonance, with a chapter map and two live demos.
  2. 40 Transfer Functions and Bode Plots Learn to compute H(jω), plot gain in decibels and phase against log frequency, and sketch Bode plots from straight-line asymptotes for RC and multi-stage circuits.
  3. 41 Filters: Low-Pass, High-Pass, Band-Pass and Band-Stop Design the four basic passive filters from resistors, capacitors and inductors, compute their cutoff and centre frequencies and check them with plots.
  4. 42 Resonance and the Quality Factor Understand resonance in series RLC circuits: resonant frequency, quality factor Q, bandwidth, voltage magnification and radio tuning, with worked numbers.
  5. 43 Chapter 8 Review: Frequency Response and Resonance Review transfer functions, decibels, Bode plots, filters and resonance with a summary picture, a design script, a sweep plot and a ten-question mixed quiz.

Projects and Practice

  1. 44 Project: Build a Circuit Solver in Python Write a small circuit simulator from scratch: parse a netlist, stamp resistors and sources into a matrix, solve with numpy and extend it to AC with complex numbers.
  2. 45 Practice Problems: Theorems to Resonance Ten mixed practice problems on superposition, Thévenin, transients, AC power and resonance, with complete solutions, a decision tree and a code checker.
  3. 46 Glossary of Circuit Analysis A plain-language glossary of more than sixty circuit analysis terms from admittance to watt, with units and formulas, plus a searchable widget and a vocabulary quiz.
  4. 47 Circuit Analysis Cheat Sheet A one-page recap of circuit analysis formulas: DC laws, theorems, transients, AC, power and frequency response, with a poster, a method checklist and tools.
  5. 48 Further Study: Where to Go After Circuit Analysis A roadmap from circuit analysis to analog electronics, signals and systems, control, power electronics, DSP and machines, with a pole preview and a path chooser.