Civil Engineering Fundamentals Tutorial
Learn Civil Engineering Fundamentals step by step: 48 lessons in 9 chapters with examples, quizzes, diagrams and practice.
Start learning →
of lessons completed
Getting Started
- Course Map: Civil Engineering Fundamentals Start here: who this civil engineering course is for, what you need to know first, how the nine chapters fit together and how to study them.
- What Is Civil Engineering? Learn what civil engineers do, how the field began, which problems it solves and how engineers balance safety, cost, time and the environment.
- Units and Significant Figures Master SI units, prefixes, weight versus mass, dimensional checks and significant figures, the habits that keep engineering calculations honest.
- Forces, Loads and Equilibrium Learn what forces and loads are, how supports react, and how the three equilibrium equations let you find unknown reactions on a simple beam.
- Chapter 1 Review: Getting Started Review the foundations of civil engineering: what engineers do, SI units, loads and equilibrium, with a recap table, calculators and a ten-question quiz.
The Civil Engineering Profession
- Chapter 2 Overview: The Civil Engineering Profession See who plans, designs, builds and inspects a civil project, how licensing works, and what this chapter covers: branches, design codes and ethics.
- Branches of Civil Engineering Meet the eight main branches of civil engineering, what each one designs, the questions they answer and how they combine on real projects.
- The Design Process and Codes Learn how engineers move from concept to detailed design, why design codes exist, and how load factors and limit states give structures a safety margin.
- Safety, Ethics and Risk Learn how engineers rank hazards with a risk matrix, apply the hierarchy of controls, and follow the ethical duty to protect the public, with famous case studies.
- Chapter 2 Review: The Civil Engineering Profession Review roles, branches, design codes, load factors, risk and ethics in civil engineering with a recap table, quick calculators and a ten-question quiz.
Surveying and Mapping
- Chapter 3 Overview: Surveying and Mapping An introduction to land surveying: what surveyors measure, how maps use scale, datums and contours, and how errors are classed and controlled.
- Measuring Distances and Angles Learn taping, slope reduction, tape corrections for length, temperature and sag, plus angles, azimuths and bearings, with worked examples and calculators.
- Leveling and Elevations Learn how a level and staff measure height differences, how to book backsights and foresights, check the arithmetic and judge misclosure in leveling.
- Traverse, Coordinates and Area Compute a closed traverse step by step: latitudes and departures, misclosure, precision, Bowditch adjustment, final coordinates and area by the coordinate method.
- Chapter 3 Review: Surveying and Mapping Review surveying: scale and contours, slope reduction and tape corrections, azimuths, leveling, traverse misclosure, adjustment and area, with a ten-question quiz.
Construction Materials
- Chapter 4 Overview: Construction Materials Meet the main construction materials and the properties engineers compare: strength, stiffness, ductility, density and durability, with a stiffness-density chart.
- Concrete Basics Understand concrete from the inside: ingredients, hydration, the water-cement ratio, mix design by volume, workability, curing and how compressive strength is tested.
- Steel and Metals Learn what makes structural steel special: stiffness, yield and ultimate strength, ductility, common grades, rebar, corrosion and fire, with a worked tension example.
- Timber, Masonry and Asphalt Learn how timber, brick and block masonry and asphalt behave, why grain and moisture matter, how walls and pavements are built, and how to calculate with them.
- Stress, Strain and Material Testing Learn stress, strain, Hooke's law, Young's modulus and Poisson's ratio, work an elongation example and see how tensile and compression tests find material properties.
- Chapter 4 Review: Construction Materials Review construction materials: properties, concrete mix and strength, steel behavior, timber, masonry, asphalt, and stress, strain and testing, with a ten-question quiz.
Hydraulics and Water Resources
- Chapter overview: Hydraulics and water resources Meet the big ideas of civil hydraulics: still water, moving water in pipes and channels, and rain turning into runoff. A map of the chapter.
- Hydrostatics: pressure and force Learn how water pressure grows with depth, how to find the force on a dam or gate, where it acts, and why buoyancy lifts a boat. Worked examples included.
- Bernoulli and pipe flow Follow the energy of water through a pipe: continuity, Bernoulli's equation, energy and hydraulic grade lines, and friction losses with Darcy-Weisbach.
- Open channels and Manning's equation Size ditches, canals and culverts: learn hydraulic radius, Manning's equation, roughness values, the Froude number and how to find normal depth.
- Rainfall and runoff: the rational method Turn rainfall into design flow: catchments, rainfall intensity, runoff coefficients, the rational method and the SCS curve number method with worked examples.
- Chapter review: Hydraulics and water resources Review pressure, force, Bernoulli, pipe friction, Manning's equation and the rational method on one page, then test yourself with a ten-question quiz.
Transportation Engineering
- Chapter overview: Transportation engineering A map of transportation engineering: how traffic flows, how roads are shaped for safety, and how pavements carry the load. Start here before the lessons.
- Traffic flow fundamentals Learn the three variables of traffic flow, the Greenshields model, lane capacity, level of service and why a brake light can start a traffic jam.
- Geometric design: sight distance and curves Work out stopping sight distance, horizontal curve radius, superelevation and side friction with metric formulas and worked examples for highway design.
- Pavement design basics Understand flexible and rigid pavements, why layers spread load, how the fourth-power law makes trucks destructive, and how stress falls with depth.
- Chapter review: Transportation engineering Review traffic flow, sight distance, curve design and pavement loading in one picture and table, then check yourself with a ten-question mixed quiz.
Geotechnical Engineering
- Chapter overview: Geotechnical engineering See how soil behaves as a material: its phases, the stresses inside it, how it settles and when it fails. A map of the geotechnical chapter.
- Soil phases and classification Learn the soil phase diagram, void ratio, water content, unit weights, grain-size curves and Atterberg limits with worked laboratory-style examples.
- Effective stress and consolidation Master Terzaghi's effective stress principle, compute stresses in layered ground with a water table, and predict how much and how fast clay settles.
- Shear strength, bearing capacity and earth pressure Use the Mohr-Coulomb criterion, Mohr circles, bearing capacity factors and Rankine earth pressure to check footings and retaining walls, with worked examples.
- Chapter review: Geotechnical engineering Review phase relations, effective stress, settlement, shear strength, bearing capacity and earth pressure in one picture, then test yourself with ten questions.
Environmental and Sustainable Design
- Chapter overview: Environmental and sustainable design Why modern civil engineers must clean water, manage storms and cut carbon. A map of the chapter on environmental and sustainable design with key terms.
- Water and wastewater treatment Follow a treatment train from screening to disinfection, measure pollution with BOD, and size a settling tank using Stokes' law and overflow rate.
- Stormwater and green infrastructure See how urbanization raises flood peaks and how swales, rain gardens, permeable paving and detention ponds slow runoff, with a simple storage volume calculation.
- Embodied carbon and life-cycle thinking Learn how to count the carbon in construction materials, what life-cycle stages A to D mean, and how to compare designs over their whole life with simple sums.
- Chapter review: Environmental and sustainable design Review water treatment, BOD, settling, stormwater detention and embodied carbon on one page, then test yourself with a ten-question mixed quiz.
Projects and Practice
- Project: sizing a road culvert A step-by-step design project that sizes a concrete culvert under a road, combining runoff estimation, full-flow capacity, velocity checks and a simple headwater estimate.
- Project: a gravity retaining wall Check a 4 m concrete gravity wall for sliding, overturning and bearing using Rankine earth pressure, then see how water behind the wall changes everything.
- Practice problems: water, roads, soil and carbon Ten worked-answer practice problems covering pressure, channel flow, runoff, traffic, curves, soil stress and carbon. Solve on paper, then check in the quiz.
- Glossary of civil engineering terms A plain-language glossary of the key terms from the hydraulics, transportation, geotechnical and sustainability chapters, with a searchable list and flashcards.
- Cheat sheet: chapters 5 to 8 on one page One-page recap of the key formulas, typical values and unit conversions for hydraulics, transportation, geotechnical and environmental design.
- Further study: where to go from here Map your next steps after the fundamentals: statics, strength of materials, fluid mechanics, structural engineering and materials science, plus how to build a portfolio.