Skip to content
Tutorials Center
My learning

Topics

Lesson 43 of 49 ยท Projects and Practice

Chapter 9 overview: projects and practice

Apply everything you learned: two design projects, a ten-problem practice set with answers, a glossary, a cheat sheet and ideas for further study.

You have now met every main idea of strength of materials: stress and strain, axial loading, torsion, bending, shear, combined loading, deflection, buckling, failure criteria and fatigue. The last chapter is where they stop being separate topics. Real design problems never announce which chapter they belong to. They hand you loads, a material and a requirement, and you decide what to check. These lessons train that habit.

Four cards: floor beam project, A-frame bracket project, practice set, and reference pages.
Chapter 9 gives you two full design projects, a practice set with answers, and the reference pages.

What you will learn

  • How to turn a design brief into a list of checks.
  • How to size a beam for strength and stiffness at the same time.
  • How to design a small structure with tension, buckling and shear checks.
  • How to test yourself with mixed problems and look up terms and formulas.

The lessons in this chapter

Lesson What you do
Project 1: design a floor beam Size a steel box section for strength and deflection
Project 2: design an A-frame bracket Check a tie rod, a strut and a pin
Practice set: ten mixed problems Solve problems from every chapter, with answers
Glossary Look up every term, with a concept map
Cheat sheet One page with all the formulas
Where to go next Plan your further study

A design brief

Requirements Loads, span, material, limits
Calculate Moment, stress, deflection
Choose A size that passes every check
1 / 4

A unit-consistency helper

Most numerical slips in this subject are unit slips. A system that never fails is to work in newtons, millimeters and megapascals (1 MPa = 1 N/mmยฒ). This little console tool converts the usual quantities, so you can check yours.

JS Convert to N, mm and MPa

Press Run (or Ctrl + Enter) to see the console output here.

No output.

Check your understanding

Quick check ยท 3 questions

of 3 answered You scored / 3 ยท perfect!

  1. 1. What is 1 kN/m expressed in N/mm?

    1 kN/m = 1000 N per 1000 mm = 1 N/mm. That is why N and mm work so well.
  2. 2. Which set of units gives stress directly in MPa?

    1 N/mmยฒ = 1 MPa, so force in N and lengths in mm give MPa with no conversion.
  3. 3. A design passes the strength check with a 40% margin but fails the deflection limit. What should you do?

    All checks must pass. Deflection depends on EI, and depth is the strongest lever.

Summary

  • The final chapter turns separate topics into design habits: list the checks, calculate, compare with limits, choose, iterate.
  • Work in N, mm and MPa (1 kN/m = 1 N/mm) to avoid unit slips.
  • Two projects, a practice set, a glossary and a cheat sheet follow.

Next: Project 1: design a floor beam