Skip to content
Tutorials Center
My learning

Topics

Lesson 17 of 49 · Axial Loading

Chapter 3 Review: Axial Loading

Review axial deformation, indeterminate bars, thermal stress and stress concentrations with a one-page sheet, a recap table, a combined worked example and a ten-question quiz.

Chapter 3 followed the bar from the simplest case to realistic complications. You can now compute how much a bar stretches, how load shares between members, how heat creates stress, and how a hole changes the stress picture. These are the tools behind trusses, columns, bolts and cables.

One-page summary of chapter 3: deformation, indeterminate bars, thermal stress and stress concentration
Chapter 3 in one picture: δ = PL/AE, equilibrium plus compatibility, σ = −EαΔT, σmax = Kt σnom.

Recap table

Lesson Idea Key formula
Axial deformation Stretch of a bar δ = P L / (A E)
Indeterminate members Equilibrium + compatibility RA + RB = P, δ_AB + δ_BC = 0
Thermal stress Blocked expansion δT = α L ΔT, σ = −E α ΔT
Stress concentration Local peaks σ_max = Kt σ_nom

Worked recap

A steel strip (E = 200 GPa, α = 12 × 10⁻⁶ /°C, 40 mm wide, 10 mm thick, so A = 400 mm², L = 800 mm) is installed between two rigid walls with no load at 20 °C. It then warms to 70 °C. Suppose it has a 10 mm hole through the middle of its width.

  1. Free expansion would be δT = 12 × 10⁻⁶ × 800 × 50 = 0.48 mm.
  2. Restrained stress: σ = −200 000 × 12 × 10⁻⁶ × 50 = −120 MPa, so the force is 120 × 400 = 48 kN of compression.
  3. At the hole: the net area is (40 − 10) × 10 = 300 mm², so σ_nom = −48 000 / 300 = −160 MPa. With d/w = 0.25, Kt ≈ 3.00 − 0.785 + 0.229 − 0.024 = 2.42, and the peak is −387 MPa. The material around the hole would yield locally: a simple "average stress" check would have missed that.
Python Check the recap numbers

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Python Which effect dominates? (a comparison plot)

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Check your understanding: chapter 3

Quick check · 10 questions

of 10 answered You scored / 10 · perfect!

  1. 1. A 2 m long steel bar (E = 200 GPa) with A = 250 mm² carries 25 kN. The elongation is…

    δ = 25 000 × 2000 / (250 × 200 000) = 1.0 mm.
  2. 2. In a uniform bar fixed between two walls with a load P at distance a from wall A (total length L), RB equals…

    From compatibility RA (a) = RB (L − a), so RB = P a / L.
  3. 3. A composite column of steel and concrete shares the load in proportion to…

    Equal strain gives force proportional to A E.
  4. 4. A free bar is heated. Which is true?

    Free expansion produces strain but no stress.
  5. 5. A fully restrained aluminum bar (E = 69 GPa, α = 23 × 10⁻⁶) is heated by 40 °C. The stress is about…

    σ = −69 000 × 23 × 10⁻⁶ × 40 = −63.5 MPa.
  6. 6. Kt for a small circular hole in a wide plate in tension is…

    The classical result is 3.
  7. 7. The best single measure to lower the stress concentration at a shaft shoulder is…

    A generous radius lets the force flow smoothly.
  8. 8. Total elongation of a stepped bar is…

    Add the elongation of each segment.
  9. 9. Which statement about thermal stress in a fully restrained bar is correct?

    σ = −E α ΔT has no length or area; heating gives compression.
  10. 10. Indeterminate problems need which extra equation type?

    Geometry of deformation supplies what statics cannot.

Summary

  • δ = P L / (A E), summed over segments.
  • Indeterminate bars: equilibrium + compatibility + force-deformation; stiffer paths attract load.
  • Thermal stress: free expansion is stress-free; blocked expansion gives σ = −E α ΔT.
  • Stress concentrations multiply the nominal stress by Kt; round corners and smooth transitions help.

Next: Torsion: The Big Picture