Skip to content
Tutorials Center
My learning

Topics

Lesson 45 of 47 ยท Projects and Practice

Glossary of structural engineering terms

A glossary of 45 structural engineering terms from steel, concrete, foundations, wind and earthquake design, with short definitions and a searchable flashcard tool.

Every field has a vocabulary that makes experts sound mysterious and beginners feel lost. Structural engineering is no different, but the words are not hard: most of them name a physical thing or a simple idea. Use this page as a reference while you read, and use the flashcards at the end to test yourself.

A building frame with six numbered parts: column, beam, slab, brace, footing and shear wall
Caption: The six structural elements you will meet again and again, numbered as in the legend.

What you will learn

  • The meaning of the 45 terms used most often in the course.
  • Which chapter each term belongs to.
  • How to use the flashcards for revision.

Basic terms

Term Meaning
Load A force acting on a structure (dead, live, wind, earthquake, snow).
Dead load D Permanent weight of the structure and fixed items.
Live load L Weight of people, furniture and movable items.
Load combination A set of factored loads checked together, such as 1.2D + 1.6L.
LRFD Load and resistance factor design: Ru โ‰ค ฯ†Rn.
Limit state A condition at which the structure stops performing: a strength or serviceability limit.
Resistance factor ฯ† A number below 1 applied to nominal strength.
Demand-capacity ratio Factored demand divided by design strength; at most 1 to pass.
Serviceability Limits on deflection, vibration and cracking for comfort and appearance.
Ductility Capacity to deform plastically without losing strength.

Steel terms

Term Meaning
Fy, Fu Yield stress and ultimate tensile stress of steel.
Gross area Ag Full cross-sectional area.
Net area An Gross area minus holes.
Shear lag Reduced efficiency when a member is connected through only part of its section.
Slenderness KL/r Effective length divided by radius of gyration; controls buckling.
Radius of gyration r โˆš(I/A), how the area is spread around an axis.
Euler load Elastic buckling load ฯ€ยฒEI/(KL)ยฒ.
Plastic moment Mp Fy Z, the moment when the whole section yields.
Lateral-torsional buckling Sideways twisting buckling of a beam's compression flange.
Fillet weld Triangular weld in a corner; strength acts through the throat.

Concrete terms

Term Meaning
fโ€ฒc Specified compressive strength of concrete.
Reinforcement (rebar) Steel bars that carry tension in concrete.
Cover Concrete between the surface and the nearest reinforcement.
Effective depth d Distance from the compression face to the centroid of tension steel.
Stress block Equivalent rectangle replacing the curved compressive stress distribution.
Tension-controlled Section with ฮตt โ‰ฅ 0.005, ductile, ฯ† = 0.90.
Stirrup Closed bar loop that resists shear in a beam.
Development length Embedment needed to develop a bar's full strength.
Interaction diagram Plot of axial capacity versus moment capacity of a column.
Creep and shrinkage Time-dependent deformation of concrete.

Soil and foundation terms

Term Meaning
Effective stress ฯƒโ€ฒ Total stress minus pore water pressure.
Friction angle ฯ† Soil parameter linking shear strength to normal stress.
Bearing capacity Pressure that soil can carry before shear failure.
Consolidation Slow settlement of saturated clay as water drains out.
Differential settlement Unequal settlement between parts of a structure.
Kern Middle third of a footing; load inside it keeps the base in compression.
Rankine coefficient Ka Ratio of horizontal to vertical stress in active earth pressure.
Pile Slender deep foundation element that carries load by end bearing or skin friction.

Lateral load terms

Term Meaning
Diaphragm Floor or roof acting as a stiff horizontal plate.
Base shear V Total horizontal seismic force at the base of a building.
Response spectrum Plot of peak response versus natural period.
R factor Response modification factor crediting ductility.
Drift Relative horizontal displacement between adjacent floors.
Soft story Story weaker or more flexible than those around it.
Velocity pressure q 0.613 Vยฒ (with modifiers) in N/mยฒ.

Try it

Flashcards
Search the glossary

Check your understanding

Quick check ยท 5 questions

of 5 answered You scored / 5 ยท perfect!

  1. 1. Which term describes the ability of a structure to deform without losing strength?

    Ductility lets a structure give warning and dissipate energy.
  2. 2. What is the kern of a rectangular footing of width B?

    Load within B/6 of the center keeps the base in compression.
  3. 3. A diaphragm is

    It collects lateral loads and distributes them to walls or frames.
  4. 4. Which is the ratio that must be at most 1 for a design to pass?

    Demand divided by capacity.
  5. 5. Effective stress is

    ฯƒโ€ฒ = ฯƒ โˆ’ u.

Summary

  • The vocabulary falls into five groups: basics, steel, concrete, soil and foundations, lateral loads.
  • Many terms are just names for formulas you already know: KL/r, Mp, ฯƒโ€ฒ, V.
  • Revisit the flashcards until every term feels obvious.

Next: Cheat sheet