Structural Engineering Tutorial
Learn Structural Engineering step by step: 47 lessons in 9 chapters with examples, quizzes, diagrams and practice.
Start learning →
of lessons completed
Getting Started
- Course map: how to learn structural engineering Who this structural engineering course is for, what you need first, how the nine chapters fit together and how to study them, with a first live beam demo.
- What structural engineers do Meet the structural engineering design cycle, the idea of limit states and safety margins, the role of building codes, and a code example of iterating a beam size.
- Forces, moments and equilibrium Learn forces, components, moments, uniform load resultants and the three equilibrium equations, with worked beam examples and a runnable reaction solver.
- Supports, reactions and idealization Learn pin, roller and fixed supports, how engineers idealize real structures, how to count reactions to test stability, and solve an overhanging beam with code.
- Chapter 1 review: getting started Review the foundations of structural engineering: the design loop, equilibrium, moments, supports and reactions, with a recap table, practice code and a ten-question quiz.
Loads and Structural Systems
- Chapter 2 overview: loads and structural systems A big-picture tour of structural loads (dead, live, snow, wind, seismic), how loads combine and travel to the ground, and the main structural systems.
- Dead and live loads Learn how to add up dead loads from unit weights, why live loads are code minimums, how live load reduction works, and calculate a floor build-up with code.
- Tributary areas and load paths Learn how floor loads reach beams, girders and columns through tributary areas, one-way and two-way slab action, and add up column loads over many storeys.
- Load combinations: LRFD, ASD and Eurocode Understand why loads are combined with factors, the main ASCE 7 LRFD and ASD combinations, the Eurocode approach, and compute governing combinations with code.
- Structural systems: beams, trusses, frames, arches and cables Compare the main structural systems, how each carries load through bending, tension or compression, the lateral systems for wind and earthquakes, and when to use which.
- Chapter 2 review: loads and structural systems Review dead and live loads, tributary areas, load combinations and structural systems with a recap table, a load takedown calculator and a ten-question quiz.
Analysis of Statically Determinate Structures
- Chapter 3 overview: analysis of statically determinate structures A map of determinate structural analysis: when equilibrium alone is enough, how to count members and reactions, and what trusses, beams and deflections have in common.
- Trusses: method of joints and method of sections Solve a truss step by step: assumptions, tension and compression, the method of joints, zero-force members, the method of sections, with a worked example and a runnable solver.
- Shear force and bending moment diagrams Draw shear force and bending moment diagrams for beams: sign conventions, the relations dV/dx = โw and dM/dx = V, worked examples, overhangs and a runnable beam solver.
- Beam deflection by double integration Find beam slope and deflection by integrating the moment-curvature equation EI vโณ = M, use standard formulas and superposition, and check serviceability limits with code.
- Chapter 3 review: statically determinate structures Review truss analysis, shear and moment diagrams and beam deflection with a recap table, a one-page checklist, practice code and a ten-question quiz.
Indeterminate Structures
- Chapter 4 overview: indeterminate structures Why most real structures are statically indeterminate, how to compute the degree of indeterminacy, what redundancy gives you, and a map of the methods in this chapter.
- The force method: compatibility and superposition Solve indeterminate beams with the force method: release a redundant, write the compatibility equation and superpose. Includes propped cantilever, continuous beam and settlement.
- Moment distribution: the Hardy Cross method Learn moment distribution: fixed-end moments, stiffness, distribution factors and carry-over, with a worked two-span beam, a step-by-step stepper and a runnable solver.
- The matrix stiffness method and a beam solver Learn the direct stiffness method: beam element stiffness matrix, assembly, boundary conditions and equivalent loads, then build and verify a working beam solver in Python.
- Chapter 4 review: indeterminate structures Review the degree of indeterminacy, the force method, moment distribution and the matrix stiffness method, with a comparison table, a stiffness experiment and a ten-question quiz.
Steel Design
- Chapter 5 overview: steel design A map of structural steel design: how tension members, columns, beams and connections are checked against yielding, buckling and fracture with LRFD.
- Tension members: gross yield and net rupture Design steel tension members with LRFD: gross-section yield, net-section rupture, effective net area, slenderness and block shear, with worked numbers.
- Columns and buckling: Euler and the column curve Learn why slender columns buckle, how effective length and slenderness control strength, and how to compute design column capacity with the AISC-style curve.
- Beams: bending, plastic moment and deflection Design a steel beam step by step: elastic and plastic section moduli, plastic moment, lateral-torsional buckling, shear strength and deflection limits, with a worked example.
- Connections: bolts, welds and how they fail Learn how bolted and welded steel connections are designed: bolt shear and bearing, slip-critical joints, fillet weld throat and strength, with worked examples.
- Chapter 5 review: steel design Review steel design: tension, columns, beams and connections in one table and one picture, then test yourself with a ten-question mixed quiz.
Reinforced Concrete
- Chapter 6 overview: reinforced concrete A map of reinforced concrete design: why steel bars and concrete work together, how beams crack, and what the strength design method checks in beams and columns.
- Beam flexure: the rectangular stress block Learn reinforced concrete flexure: the strain diagram, the equivalent rectangular stress block, moment capacity Mn, tension control, minimum steel and a worked beam example.
- Shear, stirrups and detailing of RC beams Design shear reinforcement for concrete beams: concrete and stirrup strength, spacing limits, minimum stirrups, plus development length, hooks, cover and minimum depth.
- Columns and slabs: interaction and one-way design Design reinforced concrete columns and one-way slabs: axial capacity, tied and spiral columns, the P-M interaction diagram, steel limits, slab thickness and reinforcement.
- Chapter 6 review: reinforced concrete Review reinforced concrete design: flexure, shear, columns, slabs and detailing in one table and one picture, then test yourself with a ten-question quiz.
Foundations and Soils
- Chapter 7 overview: foundations and soils A map of foundation design: soil layers and effective stress, shallow and deep foundations, site investigation, and the three checks of bearing, settlement and stability.
- Soil strength and bearing capacity Learn soil shear strength (Mohr-Coulomb), the bearing capacity equation for footings, the factors Nc, Nq and Ngamma, water table effects and allowable pressure.
- Footings, settlement and retaining walls Size spread footings, check eccentricity and the kern, estimate immediate and consolidation settlement, and check retaining walls against overturning, sliding and bearing.
- Chapter 7 review: foundations and soils Review foundation design: soil strength, bearing capacity, footing sizing, settlement and retaining wall checks in one table and one picture, plus a ten-question quiz.
Seismic and Wind Design
- Chapter 8 overview: seismic and wind design A map of lateral load design: how wind and earthquakes push buildings sideways, the lateral load path, lateral systems and the drift and ductility ideas behind code design.
- Seismic design: spectrum, base shear and story forces Learn the equivalent lateral force method: design response spectrum, period, seismic coefficient Cs, base shear V and vertical distribution, with a three-story example.
- Wind design: velocity pressure and design pressures Compute wind loads on buildings: velocity pressure qz from wind speed, exposure and height, pressure coefficients, windward and leeward pressure, base shear, overturning and drift.
- Chapter 8 review: seismic and wind design Review lateral load design: wind pressure, earthquake base shear, the load path, drift and ductility in one table and one picture, plus a ten-question quiz.
Projects and Practice
- Chapter 9 overview: projects and practice Learn the five-step structural design workflow and preview the projects, practice problems, glossary, cheat sheet and study plan that close the course.
- Project: design a steel floor beam A guided project: convert floor loads to a beam line load, compute moment and shear, select a steel I-section by strength and deflection, and check the result.
- Project: design a reinforced concrete beam A guided project: factor loads on a 6 m concrete beam, solve for flexural steel, check ductility and minimum steel, design stirrups and draw the section.
- Practice problem set with worked answers Six worked practice problems covering steel tension, columns, concrete beams, footings, retaining walls and base shear, with answers and a Python solver to check yours.
- Glossary of structural engineering terms A glossary of 45 structural engineering terms from steel, concrete, foundations, wind and earthquake design, with short definitions and a searchable flashcard tool.
- Cheat sheet: structural engineering formulas A one-page structural engineering cheat sheet: steel, reinforced concrete, soil, foundations, wind and seismic formulas with resistance factors and limits, plus a calculator.
- Further study: where to go after this course What to learn after this structural engineering course: related tracks on this site, advanced topics like prestressed concrete and finite elements, codes and practice.