Skip to content
Tutorials Center
My learning

Topics

Lesson 45 of 48 · Projects and Practice

Practice Problems: Theorems to Resonance

Ten mixed practice problems on superposition, Thévenin, transients, AC power and resonance, with complete solutions, a decision tree and a code checker.

Reading about circuits is not the same as solving them. The best way to make the ideas stick is to work problems on paper first, then check yourself with code or the solutions below. This lesson gives you ten problems that span chapters 5 to 8, a decision tree to choose a method, and a short routine for checking your work.

A decision tree: is every element linear, is the source sinusoidal, are there switches or storage elements, does only the load change
Choose the tool before you start the algebra.

What you will learn

  • How to pick a method from the shape of the problem.
  • How to work a problem through to a number with units.
  • How to check an answer with a second method.

Key terms

Sanity check: a quick test that an answer is plausible (units, size, sign, limits).

Second method: solving the problem a different way (nodal instead of Thévenin, for instance) to catch mistakes.

Limiting case: what the answer should be when a parameter goes to zero or infinity.

How to work a problem

  1. Redraw the circuit and label every node and every unknown with a polarity.
  2. Name the method using the decision tree.
  3. Write the equations symbolically first, then substitute numbers.
  4. Check units and compare with a limiting case.
  5. Verify numerically, or by a second method.

The problems

Part A: network theorems

  1. A 20 V source in series with 5 Ω feeds node a. A 20 Ω resistor connects a to ground, and a 2 A current source injects current into a. Find Va by superposition.
  2. A 30 V source feeds 10 Ω in series, and 20 Ω connects the node to ground. The terminals a-b are across the 20 Ω. Find the Thévenin equivalent, the maximum power a load can draw and the current in a 20 Ω load.
  3. A black box measures Voc = 24 V and Isc = 3 A. Find its Norton equivalent and the current in a 4 Ω load.

Part B: transients

  1. A 12 V source charges an initially empty 500 µF capacitor through 2 kΩ. How long does the capacitor take to reach 9 V?
  2. A 24 V source is switched across 8 Ω in series with 0.2 H. Find the time constant and the current after 50 ms.
  3. A series RLC circuit has L = 25 mH and C = 10 µF. Find ω₀ and the resistance for critical damping.

Part C: AC

  1. A 120 V RMS, 500 rad/s source drives 40 Ω in series with 0.1 H. Find Z, the current magnitude and the phase of the current.
  2. A 230 V RMS, 50 Hz load takes 4600 W at power factor 0.8 lagging. Find the line current, the reactive power, and the parallel capacitor that raises the pf to 0.95.

Part D: frequency response

  1. An RC low-pass has f_c = 2 kHz with C = 10 nF. Find R and the gain at 8 kHz in dB.
  2. A series RLC circuit has L = 5 mH, C = 20 nF, R = 50 Ω. Find f₀, Q and the bandwidth.

Solutions

1. Voltage source alone: 20 × 20/25 = 16 V. Current source alone (voltage source shorted): 5 ∥ 20 = 4 Ω, so 2 × 4 = 8 V. Total Va = 24 V. Check by KCL: (20 − 24)/5 + 2 = 1.2 A into the 20 Ω; 24/20 = 1.2 A ✓.

2. Vth = 30 × 20/30 = 20 V; Rth = 10 ∥ 20 = 6.667 Ω. Maximum power at RL = 6.667 Ω: Pmax = 400 / (4 × 6.667) = 15 W. A 20 Ω load draws I = 20/(6.667 + 20) = 0.75 A.

3. Rn = Voc/Isc = 8 Ω, so the Norton equivalent is 3 A in parallel with 8 Ω. A 4 Ω load gets 3 × 8/(8 + 4) = 2 A (current divider).

4. τ = RC = 2000 × 500×10⁻⁶ = 1 s. 9 = 12(1 − e^(−t)), so e^(−t) = 0.25 and t = ln 4 = 1.386 s.

5. τ = L/R = 0.2/8 = 25 ms. i(∞) = 24/8 = 3 A. i(50 ms) = 3(1 − e^(−2)) = 2.594 A.

6. ω₀ = 1/√(25×10⁻³ × 10×10⁻⁶) = 1/√(2.5×10⁻⁷) = 2000 rad/s. Critical R = 2√(L/C) = 2√2500 = 100 Ω.

7. X_L = 500 × 0.1 = 50 Ω; Z = 40 + j50 = 64.03 ∠ 51.34° Ω. I = 120/64.03 = 1.874 A, lagging by 51.34°.

8. S = P/pf = 5750 VA; I = 5750/230 = 25 A; Q = √(5750² − 4600²) = 3450 var. For pf 0.95, Q_new = 4600 × tan(arccos 0.95) = 1512 var. The capacitor provides 3450 − 1512 = 1938 var, so C = 1938 / (2π × 50 × 230²) = 116.6 µF. The new current is 4600 / (0.95 × 230) = 21.05 A.

9. R = 1/(2π × 2000 × 10⁻⁸) = 7.96 kΩ. At 8 kHz (f/f_c = 4): |H| = 1/√17 = 0.2425, which is −12.3 dB.

10. ω₀ = 1/√(5×10⁻³ × 20×10⁻⁹) = 10⁵ rad/s, so f₀ = 15.92 kHz. Q = ω₀L/R = 10⁵ × 0.005 / 50 = 10. B = f₀/Q = 1.59 kHz.

Common misconceptions

"If my answer has the right units it is right." Units catch some errors, not wrong numbers. Always do a limiting-case or second-method check.

"I can skip the sketch." Most wrong answers come from a misread circuit, not bad algebra.

"Rounding early is fine." Keep at least four significant figures until the last step.

Try it

This program recomputes the numeric answers of every problem. Compare it with your own work and change the givens to make new variants.

Python Answer checker

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The second tool is a quick self-test: type your answer to a variant of a problem and the page tells you whether you are within 2 %.

Check your own answer

Check your understanding

Quick check · 5 questions

of 5 answered You scored / 5 · perfect!

  1. 1. A circuit has one load that will change many times while the rest is fixed. Which method is best?

    Replace the fixed part by its equivalent once, then each new load needs a single division.
  2. 2. You obtain a Thévenin resistance of 4 Ω with Voc = 12 V. The short-circuit current should be

    Isc = Voc / Rth = 12 / 4 = 3 A; this is a useful second-method check.
  3. 3. A capacitor charging through a resistor reaches 63.2 % of its final value after

    1 − e⁻¹ = 0.632.
  4. 4. A load has pf 0.6 lagging. Adding a parallel capacitor of the right size will

    It supplies reactive power locally, reducing the apparent power and the line current.
  5. 5. A series RLC resonator has Q = 25 at 5 kHz. Its bandwidth is

    B = f₀ / Q = 5000 / 25 = 200 Hz.

Summary

  • Choose the method from the problem's shape, then name your unknowns and polarities.
  • Always verify with a second method or a limiting case.
  • Keep significant figures until the end and state units.
  • Use code to check numbers, never to skip the reasoning.

Next: Glossary