Engineering Thermodynamics Tutorial
Learn Engineering Thermodynamics step by step: 48 lessons in 9 chapters with examples, quizzes, diagrams and practice.
Start learning →
of lessons completed
Getting Started
- Course Map: Welcome to Engineering Thermodynamics Start here: what engineering thermodynamics is, who this free course is for, the nine chapters from systems and units to power cycles and combustion, and how to study.
- Systems, States and Processes Learn to choose a thermodynamic system and boundary, describe its state with properties, and tell isobaric, isothermal, isochoric and adiabatic processes and cycles apart.
- Units, Dimensions and Pressure Master SI units, prefixes and dimensional checks for thermodynamics, then learn absolute, gauge and vacuum pressure and how to read a manometer with worked examples.
- Temperature and the Zeroth Law Understand thermal equilibrium, the zeroth law, Celsius, Kelvin, Fahrenheit and Rankine scales, absolute zero and the constant-volume gas thermometer with worked conversions.
- Chapter 1 Review: Getting Started Review chapter 1 of engineering thermodynamics: systems, states, processes, SI units, absolute and gauge pressure, temperature scales and the zeroth law, with a 9-question quiz.
Properties and State
- Properties and State: Chapter Overview Preview chapter 2 of engineering thermodynamics: how pressure, temperature and specific volume fix a state, and how tables, the ideal gas law and the compressibility factor give every other property.
- Phase Change of Pure Substances Follow water as it is heated at constant pressure: compressed liquid, saturated liquid, mixture, saturated vapor and superheated vapor, with T-v diagrams, saturation temperature and the critical point.
- Steam Tables and Quality Learn to read saturated and superheated steam tables, compute the quality of a liquid-vapor mixture with the lever rule, and interpolate between rows with worked examples.
- The Ideal Gas and Compressibility Use P v = R T with gas constants, solve mass and volume problems, and learn when the compressibility factor Z and reduced properties are needed for real gases.
- Chapter 2 Review: Properties and State Review chapter 2: phases of water, the T-v dome, saturated mixtures and quality, the ideal gas law, compressibility and how to pick the right property tool, with a 9-question quiz.
The First Law
- The First Law: Chapter Overview Preview chapter 3: the first law as an energy bookkeeping rule for closed systems and control volumes, with heat, work, internal energy and enthalpy, and a road map of the lessons.
- Heat and Work Learn what heat and work are, the sign convention, how to compute boundary work as the area under a P-V path for isobaric, isothermal and polytropic processes, and other forms of work.
- Energy Balance for Closed Systems Apply the first law to closed systems: Q minus W equals the change in energy, internal energy and enthalpy of ideal gases with cv and cp, constant-pressure heating, adiabatic compression and cycles.
- Energy Balance for Control Volumes Derive the steady-flow energy equation: mass conservation, flow work, why enthalpy h = u + Pv appears, and how to apply it to ducts, heaters and pipes with worked numbers.
- Steady-Flow Devices Apply the steady-flow energy equation to turbines, compressors, pumps, nozzles, throttling valves and heat exchangers, with worked examples and the assumptions behind each.
- Chapter 3 Review: The First Law Review chapter 3: heat and work signs, boundary work, closed-system balance, enthalpy and the steady-flow energy equation for turbines, compressors, nozzles and valves, with a 9-question quiz.
The Second Law and Entropy
- The Second Law: Chapter Overview Preview chapter 4: why the first law is not enough, how the second law gives processes a direction and engines a limit, and what entropy measures, with a road map of the lessons.
- Heat Engines and the Second-Law Statements Understand thermal efficiency, the Kelvin-Planck and Clausius statements of the second law, refrigerators and heat pumps with COP, and the sources of irreversibility, with worked examples.
- The Carnot Cycle and Absolute Temperature Learn the four processes of the reversible Carnot cycle, the Carnot efficiency 1 - TL/TH, the Carnot principles and the maximum COP of refrigerators and heat pumps, with worked examples.
- Entropy and the T ds Relations Define entropy from the Clausius inequality, calculate entropy change for ideal gases, liquids and steam mixtures with the T ds relations, and use isentropic relations with worked examples.
- Entropy Balance and Isentropic Efficiency Write entropy balances for closed and open systems, compute entropy generation, and use isentropic efficiency to compare real turbines, compressors and nozzles with ideal ones.
- Chapter 4 Review: The Second Law and Entropy Review chapter 4: Kelvin-Planck and Clausius, thermal efficiency and COP, Carnot limits, entropy change, entropy generation and isentropic efficiency, with a 9-question quiz.
Power Cycles
- Chapter 5 overview: power cycles A map of Chapter 5: how heat engines turn heat into work, why every engine needs a cold sink, and how Rankine, Otto, Diesel and Brayton cycles fit together.
- The Rankine steam cycle Follow water around the ideal Rankine cycle, read its T-s diagram, and calculate pump work, turbine work, heat input and thermal efficiency with a worked example.
- Reheat and regeneration Learn how reheating steam and bleeding steam to feedwater heaters push Rankine efficiency higher, with an open feedwater heater mass balance worked step by step.
- Otto and Diesel engines Analyze piston engines with the air-standard Otto and Diesel cycles: compression ratio, cutoff ratio, temperatures, pressures, efficiency and mean effective pressure.
- Brayton cycle and gas turbines Analyze the air-standard Brayton cycle for gas turbines and jet engines: pressure ratio, back work ratio, net work, real compressor and turbine losses, and regeneration.
- Chapter 5 review: power cycles Review Rankine, reheat, regeneration, Otto, Diesel and Brayton cycles in one recap table, a comparison chart and a ten-question quiz.
Refrigeration Cycles
- Chapter 6 overview: refrigeration cycles A map of Chapter 6: how refrigerators and heat pumps move heat uphill with work, how COP is defined, and what the reversed Carnot cycle says about limits.
- The vapor-compression refrigeration cycle Trace refrigerant through compressor, condenser, expansion valve and evaporator, read the P-h diagram, and calculate COP, mass flow and the cost of a lossy compressor.
- Heat pumps and refrigerants Understand heating COP, why heat pumps weaken in the cold, how refrigerants are chosen (R-134a, propane, CO2, ammonia) and how absorption systems use heat instead of work.
- Chapter 6 review: refrigeration cycles Review refrigeration and heat pump basics: COP definitions, the vapor-compression cycle on a P-h diagram, refrigerants and a ten-question quiz.
Gas Mixtures and Psychrometrics
- Chapter 7 overview: gas mixtures and psychrometrics A map of Chapter 7: how to treat ideal gas mixtures, why air always carries some water vapor, and how psychrometric charts guide heating, cooling and humidity control.
- Ideal gas mixtures Calculate mole and mass fractions, molar mass, gas constant, partial pressures, specific heat and mixing entropy for ideal gas mixtures, with a fully worked example.
- Properties of humid air Calculate humidity ratio, relative humidity, dew point, wet-bulb temperature, enthalpy and specific volume of moist air and read them off a psychrometric chart.
- Air-conditioning processes Analyze heating, cooling with dehumidification, humidifying, evaporative cooling and adiabatic mixing of moist air with mass and energy balances, plus worked examples.
- Chapter 7 review: gas mixtures and psychrometrics Review ideal gas mixtures, humid air properties and air-conditioning processes with a one-picture summary, a formula table and a ten-question quiz.
Combustion and Applications
- Chapter 8 overview: combustion and applications A map of Chapter 8: how fuel and air react, how to balance combustion equations, where the heat comes from, and how flame temperature and emissions follow from the first law.
- Combustion stoichiometry Balance combustion equations for hydrocarbon fuels, compute theoretical and excess air, air-fuel ratio, product composition and the dew point of exhaust, with worked examples.
- The first law for reacting systems Extend the first law to chemical reactions: enthalpy of formation, heat of combustion, higher and lower heating values, and a steady-flow energy balance for a burner.
- Flame temperature and applications Find the adiabatic flame temperature of methane, see how excess air and dissociation change it, and apply combustion thermodynamics to boilers, engines, CO2 emissions and NOx.
- Chapter 8 review: combustion and applications Review combustion stoichiometry, enthalpy of formation, heating values and adiabatic flame temperature with a summary picture, a formula table and a ten-question quiz.
Projects and Practice
- Case study: a combined-cycle power plant Put Chapter 5 to work: a gas turbine topping cycle feeds a heat-recovery steam generator and a Rankine bottoming cycle, and we compute the energy split and combined efficiency.
- Case study: sizing an air-conditioning coil Size the supply airflow and cooling coil for a small room using sensible and latent loads, a mixing box and a psychrometric calculation, step by step.
- Practice problem set Eight mixed practice problems on cycles, refrigeration, gas mixtures, humid air and combustion, with a method checklist and a solver that checks your answers.
- Glossary: power cycles to combustion Definitions of the key terms from Chapters 5 to 8: power cycles, refrigeration, gas mixtures, humid air and combustion, with symbols and units, plus a flashcard drill.
- Cheat sheet: formulas for cycles, mixtures and combustion A one-page recap of the main formulas from power cycles, refrigeration, gas mixtures, psychrometrics and combustion, with constants and a small formula library to reuse.
- Further study: where thermodynamics leads next Plan your next steps after engineering thermodynamics: heat transfer, fluid mechanics, power systems, aerodynamics, materials, advanced topics and ways to practice.