Skip to content
Tutorials Center
My learning

Topics

Lesson 45 of 45 Β· Projects and Practice

Further study: where to go after semiconductor devices

Plan your next steps after semiconductor devices: quantum mechanics, analog and digital electronics, power electronics, signals and systems, and how each builds on this course.

You now understand the devices behind modern electronics: how a pn junction conducts, how a transistor amplifies or switches, how light is emitted and detected, and how chips are made. This last lesson shows how those ideas connect to the rest of engineering and physics, and gives you three concrete paths, depending on whether you want to design circuits, understand the physics more deeply, or work on power and energy systems.

What you will learn

  • What you can already do with this course and where its simplifications end.
  • Three study paths, with the tracks of this site that fit each.
  • A short list of habits that turn knowledge of devices into skill.
  • How to plan the next 12 weeks.

What you have covered

The second half of this course took you through the bipolar transistor (injection, gain, regions and switching), the MOS capacitor and MOSFET (threshold, I-V, small signal, subthreshold, CMOS), optoelectronics (LEDs, lasers, photodiodes, solar cells) and fabrication and scaling (process steps, yield, Moore's law and 3D transistors). Along the way you built small models in Python: a compact MOSFET simulator and a solar cell fit. That is the foundation on which device engineers, circuit designers and process engineers all stand.

Where did we simplify? The depletion approximation hides the real charge distribution; the square-law MOSFET ignores velocity saturation and quantum confinement; the BJT model ignores heterojunctions, which modern RF transistors (SiGe) use; we treated carriers classically, though inside a few-nanometer channel quantum effects such as subband quantization and tunneling matter. Industry uses numerical device simulators (TCAD) that solve the drift-diffusion and Poisson equations in two or three dimensions, and compact models (BSIM, EKV) for circuit simulation. The EKV-style model you wrote in the project is the same idea in miniature.

Three paths

A winding roadmap from device basics through quantum mechanics, analog electronics, power electronics and digital logic
Caption: Five milestones, with quantum mechanics as the physical foundation and analog, power and digital electronics as the main applications.

Path A: understand the physics more deeply. Start with quantum mechanics (wave functions, tunneling, the origin of energy bands) and continue with statistical mechanics (Fermi-Dirac statistics, why the Fermi level behaves as it does). Revisit the pn junction and MOS capacitor after each; you will see that the formulas you used are consequences, not axioms. Further reading beyond this site: solid-state physics texts and device-physics books such as those by Sze, Neamen and Pierret.

Path B: design circuits. Learn circuit analysis if you have not yet, then analog electronics (amplifiers with BJTs and MOSFETs, biasing, feedback, op-amps) and digital logic (gates, flip-flops, timing). Next come computer organization and embedded systems, where transistors become processors. Here your device knowledge pays off every time you read a datasheet: V_ov, g_m, r_o, leakage and switching speed are now familiar quantities.

Path C: energy and power. Study power electronics (power MOSFETs, IGBTs, diodes, converters), electrical machines and control systems. Solar cells and LEDs connect to renewable energy and lighting design, and wide-gap semiconductors (SiC, GaN) are revolutionizing power conversion. Signals and systems and digital signal processing complete the picture for anyone who wants to work with sensors and communications.

Habits that build skill

  • Always check units and orders of magnitude. A real engineer estimates first and calculates second.
  • Read real datasheets. Find V_T, Ξ², I_S, leakage, V_ce(sat), capacitances and compare with this course's numbers.
  • Simulate everything. Re-implement each model in code (as you did), then vary parameters to see what breaks.
  • Know the limits of every model. Write down for each equation the assumption that fails first.
  • Teach it back. Explain the BJT or MOSFET to someone else in five minutes; gaps in your explanation are gaps in your understanding.

Try it

Pick your interest and the widget suggests the next tracks on this site, in order. It is a simple lookup, not a personalized assessment.

Choose your path

Second, a small planner. Enter the hours you can study each week and see how long each path takes if every track needs about 25 hours of focused work. The 25-hour figure is an assumption you can change.

Python Study planner

Press Run (or Ctrl + Enter) to see the result here.

Program input Β· what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Check your understanding

Quick check Β· 3 questions

of 3 answered You scored / 3 Β· perfect!

  1. 1. Which topic explains why electrons in a crystal have energy bands?

    Energy bands follow from solving the SchrΓΆdinger equation in a periodic potential.
  2. 2. Which track best follows this course if you want to use transistors in amplifiers?

    Analog electronics applies BJT and MOSFET models to amplifier design.
  3. 3. TCAD simulators solve

    They numerically solve the semiconductor equations for realistic device geometries.

Summary

  • You can now analyze diodes, BJTs, MOSFETs, LEDs, lasers, photodiodes and solar cells and explain how chips are made.
  • Deeper physics comes from quantum and statistical mechanics; circuit design from analog and digital electronics; energy applications from power electronics and machines.
  • Good habits (estimate first, read datasheets, simulate, teach back) matter more than any single formula.

Back to the course page: Semiconductor Devices