Skip to content
Tutorials Center
My learning

Topics

Lesson 43 of 49 · Statistical Thermodynamics and Surfaces

Chapter 8 Review: Statistical Thermodynamics and Surfaces

Review the Boltzmann distribution, partition functions, equipartition, Sackur-Tetrode entropy, surface tension and Langmuir adsorption with a ten-question mixed quiz.

This chapter turned energy levels into thermodynamics and then applied the same Boltzmann reasoning to interfaces. The recap below puts the equations in one place and highlights what each is used for.

Four linked cards: Boltzmann, partition function, thermodynamics, surfaces
The chapter in one picture: weigh the states with Boltzmann factors, count them with q, average to get thermodynamics, and apply the logic at surfaces.

Recap table

Topic Key equation Use
Boltzmann distribution nᵢ/N = gᵢ e^(−εᵢ/kT)/q populations of levels
Entropy S = k ln W counting states
Partition function q = Σ gᵢ e^(−εᵢ/kT), Q = qᴺ/N! master function
Thermodynamics U = −∂lnQ/∂β, A = −kT ln Q, S = U/T + k ln Q bulk properties
Translation q = V/Λ³ gas entropy, pressure
Rotation q = T/(σθ_rot) symmetry numbers
Vibration q = 1/(1 − e^(−θ/T)) heat capacity steps
Sackur–Tetrode S_m = R[ln(kT/pΛ³) + 5/2] monatomic gas entropy
Young–Laplace ΔP = 2γ/r bubbles, droplets
Langmuir θ = KP/(1 + KP) adsorption, surface catalysis

Common calculation traps

  • Temperatures in kelvin, and spectroscopic constants converted with θ = 1.4388 cm K × ν̃.
  • Degeneracy: do not forget gᵢ when summing over levels (rotation has 2J + 1).
  • Symmetry number: σ = 2 for homonuclear diatomics.
  • Standard state: Sackur–Tetrode values quoted at 1 bar are not the same as at 1 atm; the difference is R ln(1.01325) = 0.11 J K⁻¹ mol⁻¹.

Try it

A calculator you can reuse for quiz problems: Boltzmann populations of any set of levels, and Langmuir coverage.

Python Boltzmann and Langmuir calculator

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Check your understanding

Quick check · 10 questions

of 10 answered You scored / 10 · perfect!

  1. 1. A non-degenerate level lies 207 cm⁻¹ (about kT at 298 K) above the ground state. Its population relative to the ground state is about

    e⁻¹ = 0.37.
  2. 2. For which molecule is σ = 2?

    Homonuclear diatomics have a symmetry number of 2.
  3. 3. The translational contribution to the molar energy of an ideal gas is

    Three quadratic terms, each ½RT.
  4. 4. Why does the Sackur–Tetrode entropy decrease with increasing pressure at fixed T?

    S = R[ln(kT/pΛ³) + 5/2]; larger p reduces the log.
  5. 5. At 298 K the vibrational heat capacity of N₂ is practically zero because

    Only v = 0 is populated.
  6. 6. If 4 molecules are distributed with 2 in each of two levels, W is

    4!/(2! 2!) = 6.
  7. 7. Water (γ = 0.072 N/m) rises in a 0.1 mm radius tube (perfect wetting) to roughly

    h = 2γ/(ρgr) = 0.144/(997 × 9.81 × 10⁻⁴) = 0.147 m, about 15 cm.
  8. 8. In the Langmuir model, K = 0.20 kPa⁻¹ and P = 10 kPa. What is θ?

    KP = 2, θ = 2/3 = 0.67.
  9. 9. Which statement about chemisorption is correct?

    Chemisorption forms chemical bonds, so it saturates at a monolayer.
  10. 10. The fluctuation of an energy in a system of 10⁸ molecules is of relative size about

    Relative fluctuations scale as 1/√N = 10⁻⁴.

Summary

  • Boltzmann factors weigh states; partition functions count them; ln Q delivers thermodynamics.
  • Each kind of motion contributes separately, with its own characteristic temperature.
  • Surfaces store energy (γ) and adsorb gases (Langmuir); both follow from the same balance of energy and entropy.

Next: Chapter 9: Project, Kinetics from Raw Data