Skip to content
Tutorials Center
My learning

Topics

PCB Design and Prototyping Tutorial

Learn PCB Design and Prototyping step by step: 45 lessons in 9 chapters with examples, quizzes, diagrams and practice.

Start learning →

of lessons completed

Getting Started

  1. 1 Course Map: How to Study PCB Design See the whole PCB design course at a glance: who it is for, what you need to know first, the nine chapters and a study plan for building real boards.
  2. 2 What Is a PCB? Learn what a printed circuit board is, what every feature on it does (traces, pads, vias, mask, silkscreen) and how copper resistance affects a design.
  3. 3 Layers, Copper Weight and Materials Understand PCB layer counts, copper weight in ounces, core and prepreg, and why a four-layer stack-up with ground and power planes is so popular.
  4. 4 The Design Workflow and Tools Follow the six stages of PCB design from requirements to testing, meet the common EDA tools such as KiCad and learn what files you send to the factory.
  5. 5 Chapter 1 Review: Getting Started Review what a PCB is, how layers and copper weight work and the design workflow, with a recap table and a ten-question quiz covering chapter 1.

From Schematic to Board

  1. 6 Chapter 2 Overview: From Schematic to Board Overview of chapter 2: how a schematic becomes a netlist and then a board, with a map of the four lessons on capture, netlists, ERC, BOM and rules.
  2. 7 Schematic Capture Learn how to draw a clear schematic: symbols, reference designators, values, net labels and power symbols, with an LED resistor calculation as a worked example.
  3. 8 Netlists, ERC and the Bill of Materials See how a schematic becomes a netlist, how electrical rules check finds wiring errors and how a bill of materials is built and grouped for ordering parts.
  4. 9 Board Setup, Stack-up and Design Rules Set up a PCB before routing: board outline, layer count, stack-up and design rules for trace width, clearance, via size and annular ring, taken from your fab.
  5. 10 Chapter 2 Review: From Schematic to Board Review schematic capture, netlists, ERC, BOM and board setup with a recap table, a one-picture summary and a ten-question quiz for chapter 2.

Components and Footprints

  1. 11 Chapter 3 Overview: Components and Footprints Overview of chapter 3: passive values and tolerances, package families, footprints and land patterns, and how to read a datasheet before choosing a part.
  2. 12 Passives and Preferred Values Learn the E6, E12 and E24 preferred-value series, resistor tolerance and power, and capacitor voltage ratings and dielectrics (C0G, X7R) for PCB design.
  3. 13 Packages: SMD and Through-Hole Compare surface-mount and through-hole packages: chip sizes 0402 to 1206 in imperial and metric, SOIC, QFN, DIP and BGA, with pitch and how to choose for hand or machine assembly.
  4. 14 Footprints and Land Patterns Learn what a PCB footprint contains (pads, paste, mask, silkscreen, courtyard), how land patterns are sized and how to verify a footprint before ordering a board.
  5. 15 Choosing Parts and Reading Datasheets Learn to read a datasheet: absolute maximum ratings, recommended operating conditions, pinout and package drawing, plus derating and sourcing rules for choosing parts.
  6. 16 Chapter 3 Review: Components and Footprints Review preferred values, chip and IC packages, footprints and datasheets with a recap table, a one-picture summary and a ten-question quiz for chapter 3.

Layout and Routing

  1. 17 Chapter 4 Overview: Layout and Routing Overview of chapter 4: part placement, trace width and current, vias, and ground planes with return paths, the four habits behind a good board layout.
  2. 18 Placement Strategy Learn how to place parts on a PCB: group by function, put connectors at the edge, decoupling capacitors at the pins and crystals close to the chip, and measure wire length.
  3. 19 Trace Width and Current Calculate PCB trace width for a given current with the IPC-2221 formula, understand temperature rise, internal versus external layers and voltage drop, with runnable examples.
  4. 20 Vias and Layer Changes Learn about PCB via types (through, blind, buried, micro), sizes and annular ring, via resistance and inductance, tenting, thermal vias and when to change layers.
  5. 21 Ground Planes and Return Paths Understand why every signal needs a return path, how return current follows the trace over a ground plane, and why slots, splits and long detours cause noise and EMI.
  6. 22 Chapter 4 Review: Layout and Routing Review placement, trace width and current, vias and return paths with a recap table, a one-picture summary and a ten-question quiz for chapter 4.

Signal and Power Integrity

  1. 23 Chapter 5 overview: signal and power integrity Why fast edges ring, why neighbors interfere and why supply rails droop, and the five lessons that teach you to prevent each problem on a real printed circuit board.
  2. 24 Impedance and reflections Learn what characteristic impedance means on a PCB, how trace width and stackup set it, why mismatches cause ringing, and how series termination fixes it, with calculators.
  3. 25 Crosstalk and return paths Understand where return current flows under a trace, why plane splits cause trouble, and how spacing, guard traces and layer choice reduce crosstalk, with runnable models.
  4. 26 Decoupling and power planes Learn where to place decoupling capacitors, how ESL and loop area limit them, how to set a target impedance and how planes and copper width carry current on a PCB.
  5. 27 Chapter 5 review: signal and power integrity Review impedance, reflections, return paths, crosstalk, decoupling and power delivery with a one-page poster, a recap table of formulas and a ten-question quiz.

Manufacturing and Assembly

  1. 28 Chapter 6 overview: manufacturing and assembly Follow a board from CAD files through fabrication, stencil printing, pick and place, reflow and inspection, and learn what each step demands from your design.
  2. 29 How a board is made Follow a PCB through lamination, drilling, plating, etching, solder mask and surface finish, and learn the design rules (trace, ring, aspect ratio) that each step creates.
  3. 30 Gerbers and fabrication files Learn what is inside a Gerber package, how drill, BOM and pick-and-place files work, and how to check a fabrication package before ordering a PCB.
  4. 31 Assembly, soldering and reflow Understand solder paste printing, stencil design, pick and place, the reflow temperature profile, common defects like tombstoning and bridging, and hand soldering basics.
  5. 32 Chapter 6 review: manufacturing and assembly Review stackups, vias, design rules, fabrication files, stencils, reflow and defects with a poster, a recap table and a ten-question quiz.

Testing and Debugging

  1. 33 Chapter 7 overview: testing and debugging A plan for the day your first board arrives: inspect, check for shorts, power up safely, measure the rails and debug methodically. Overview of the chapter's lessons.
  2. 34 Bring-up and debugging Learn a safe PCB bring-up sequence, how to use a multimeter and oscilloscope correctly, why probe ground leads ring, and how to isolate faults methodically.
  3. 35 DFM, DFT and EMC Learn design-for-manufacture, design-for-test and EMC habits for PCBs: rule margins, fiducials, test points, headers, loop area, filtering and pre-compliance checks.
  4. 36 Chapter 7 review: testing and debugging Review the bring-up sequence, probing technique, fault isolation, DFM, DFT and EMC habits with a poster, a recap table and a ten-question quiz.

Complete Projects

  1. 37 Chapter 8 overview: complete projects Two end-to-end PCB projects, a USB-C powered sensor board and a 12 V to 3.3 V buck regulator board, plus a pre-order review, applying every earlier chapter.
  2. 38 Project: a USB-C powered sensor board Design a small two-layer USB-C sensor board: CC resistors, ESD protection, LDO power dissipation, decoupling, I2C pull-ups, USB routing, floorplan and test points.
  3. 39 Project: a 12 V to 3.3 V buck regulator board Design a 2 A buck regulator board: choose the inductor and capacitors, set the feedback divider, shrink the hot loop, plan thermal vias and check your layout.
  4. 40 Chapter 8 review: complete projects Review the decisions behind a USB-C sensor board and a 12 V to 3.3 V buck regulator: values, loops, protection, test points and the pre-order checklist, with a ten-question quiz.

Projects and Practice

  1. 41 Practice problems: impedance, power, copper and assembly Ten PCB design practice problems with worked solutions: impedance, reflections, termination, decoupling, copper width, vias, stencils and a buck inductor, with a runnable answer checker.
  2. 42 Mini projects: three boards to design yourself Three self-guided PCB projects, from a blinking LED board to a sensor breakout and a buck module, each with requirements, steps, acceptance tests and stretch goals.
  3. 43 Glossary: PCB design terms A glossary of PCB design and prototyping terms: stackup, vias, Gerber, impedance, return path, decoupling, reflow, DFM, DFT and EMC, with one-line definitions and a flashcard quiz.
  4. 44 Cheat sheet: PCB design formulas on one page A one-page PCB design cheat sheet: impedance, reflections, edge speed, decoupling, copper, fabrication rules and reflow numbers, with typical values and a bring-up order.
  5. 45 Further study: where to go after PCB design Plan your next steps after PCB design: circuit analysis, analog and power electronics, embedded systems, RF, standards and tools, with a study path and project ideas.