Skip to content
Tutorials Center
My learning

Topics

Lesson 39 of 44 ยท Compressible Flow and Machinery

Chapter 8 review: Compressible flow and machinery

Review Mach number, isentropic relations, choked flow, normal shocks and pump operating points with a recap table, a leak calculator and ten mixed questions.

This chapter took you from the speed of sound to the pumps and turbines in every power plant and water works. The key tools are few. You can express most gas-flow problems through the Mach number, and most machinery problems through head, flow and power.

A winding road with five stops: Mach number and sound speed, isentropic relations, nozzles, shocks and pump power.
Five stops from Mach number to pump power.

Recap table

Topic Key result
Speed of sound a = โˆš(ฮณ R T); air at 15 ยฐC: 340 m/s
Mach number Ma = V / a; compressible when Ma > 0.3
Stagnation temperature Tโ‚€/T = 1 + (ฮณโˆ’1)/2 ยท Maยฒ
Isentropic ratios (air) pโ‚€/p = (1 + 0.2Maยฒ)^3.5, ฯโ‚€/ฯ = (1 + 0.2Maยฒ)^2.5
Critical ratios (air) T*/Tโ‚€ = 0.833, p*/pโ‚€ = 0.528
Area-Mach dA/A = (Maยฒ โˆ’ 1) dV/V; throat has Ma = 1
Choked flow (air) แน_max โ‰ˆ 0.0404 A* pโ‚€ / โˆšTโ‚€
Normal shock (Maโ‚ = 2) Maโ‚‚ = 0.577, pโ‚‚/pโ‚ = 4.5, Tโ‚‚/Tโ‚ = 1.69, pโ‚€โ‚‚/pโ‚€โ‚ = 0.721
Pump power P_h = ฯ g Q H, P_shaft = P_h / ฮท
Affinity laws Q โˆ N Dยณ, H โˆ Nยฒ Dยฒ, P โˆ Nยณ Dโต
Operating point pump curve = system curve

Which tool for which problem

  1. A gas moving slower than about Mach 0.3: treat it as incompressible and use Bernoulli.
  2. A gas through a nozzle or a duct, with no friction or heat: isentropic relations.
  3. Pressure ratio across a hole or nozzle below 0.528: choked; use the maximum mass flow.
  4. Supersonic flow meeting a high back pressure or a blunt body: expect a shock; use the normal shock relations.
  5. Pump or fan in a pipe network: intersect the machine curve with the system curve; use the affinity laws for speed changes.

Try it

A pressurized air tank leaks through a small hole. This calculator checks whether the flow is choked and finds the mass flow, using the ideal nozzle (no discharge-coefficient correction).

Python Leak from a pressurized air tank

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Chapter in ten questions

Quick check ยท 10 questions

of 10 answered You scored / 10 ยท perfect!

  1. 1. What is the speed of sound in air at 250 K? (gamma = 1.4, R = 287)

    a = sqrt(1.4 x 287 x 250) = sqrt(100,450) = 317 m/s.
  2. 2. An aircraft flies at 270 m/s where a = 300 m/s. Its Mach number is:

    Ma = 270 / 300 = 0.90, transonic territory.
  3. 3. Air has T0 = 600 K and Ma = 2. What is the static temperature?

    T = T0 / (1 + 0.2 x 4) = 600 / 1.8 = 333 K.
  4. 4. In which duct does supersonic flow accelerate?

    For Ma above 1, dA/A = (Ma^2 - 1) dV/V is positive, so area and speed rise together.
  5. 5. What is the critical pressure ratio p*/p0 for air?

    At Ma = 1, p/p0 = (1.2)^-3.5 = 0.528.
  6. 6. A normal shock in air has Ma1 = 3. The downstream Mach number is approximately:

    Ma2 = sqrt((1 + 0.2 x 9) / (1.4 x 9 - 0.2)) = sqrt(2.8 / 12.4) = 0.475.
  7. 7. Which is NOT true of a normal shock?

    Stagnation pressure falls across a shock because the process is irreversible.
  8. 8. A pump runs at 1,000 rpm giving 30 m of head. At 1,200 rpm the head (same pump) is approximately:

    H scales with N^2: 30 x 1.2^2 = 43.2 m.
  9. 9. A hydro turbine has Q = 4 m^3/s, H = 100 m and efficiency 0.9. The power is approximately:

    P = 0.9 x 998 x 9.81 x 4 x 100 = 3.52 MW.
  10. 10. Closing a throttle valve downstream of a pump moves the operating point to:

    The system curve steepens, so the crossing point moves up the falling pump curve.

Summary

  • Compressibility enters through Ma = V/a; a throat is where Ma = 1 and flow chokes.
  • Isentropic ratios link T, p, ฯ and A/A* to Ma; shocks lose stagnation pressure.
  • Machines meet their system at the intersection of the pump curve and the system curve; affinity laws scale speed changes.
  • Next: put it all together in two projects.

Next: Project: Design a pumped pipeline