Skip to content
Tutorials Center
My learning

Topics

Lesson 46 of 49 · Projects and Practice

Practice problems with checked answers

Ten numerical electrodynamics problems on induction, displacement current, Poynting flux, polarizers, reflection, skin depth, radiation, Friis and relativity.

Problems are where understanding gets tested. Try each one on paper first, then compare with the numbers produced by the checking program below. Each problem uses one or two ideas from Chapters 5 to 8.

A grid of ten numbered problem tiles, each labelled with its topic and the key formula to use.
Ten problems, ten tools: pick the formula on the tile, then compute.

The problems

  1. Induction. A coil with 200 turns and area 25 cm² sits in a field that drops uniformly from 0.80 T to zero in 40 ms, with the field along the coil axis. What is the average emf?
  2. Displacement current. The plates of a capacitor have area 0.020 m² and the electric field between them changes at 1.0 × 10¹² V/(m·s). What displacement current flows?
  3. Laser fields. A 2.0 mW laser beam of uniform radius 1.0 mm travels in vacuum. Find its intensity and the peak electric field E₀.
  4. Polarizers. Unpolarized light of 120 W/m² passes two ideal polarizers whose axes differ by 30°. What intensity emerges?
  5. Reflection. A 5.0 mW beam hits glass (n = 1.5) at normal incidence. How much power is reflected?
  6. Skin depth. Find the skin depth of aluminum (σ = 3.5 × 10⁷ S/m) at 10 kHz.
  7. Dipole radiation. An oscillating dipole with p₀ = 1.0 × 10⁻⁹ C·m runs at 10 MHz. What is the average radiated power?
  8. Friis link. Two half-wave dipoles (G = 1.64) at 900 MHz are 500 m apart. The transmitter sends 1.0 W. What power is received?
  9. Field transformation. In a frame S, B = 0.50 T ẑ and E = 0. A frame moves at 0.80 c along x. Find E' and B'.
  10. Retardation. A radio signal from a probe at 2.0 × 10¹¹ m is received. How long was it in transit? How does the Poynting flux change if the distance is doubled?

Strategy. Write the formula, substitute with units, estimate the order of magnitude, then check with the program. If your answer differs by a factor like 2, π or √2, you probably used peak instead of rms, or area instead of radius.

Key terms

Order-of-magnitude check: a rough estimate that tells you whether an answer is plausible. Peak versus rms: E₀ is the peak amplitude; the intensity uses E₀²/2. Dimensional analysis: checking that both sides of an equation have the same units. Decibel: ten times the base-10 logarithm of a power ratio. Frame-invariant: the same in every inertial frame, such as E² − c²B².

How to attack a problem

Experts follow the same five steps every time, and so should you.

  1. Name the physics. Is the field changing in time (Faraday), is charge accumulating (displacement current), is it a traveling wave (Poynting, Fresnel), or does a charge accelerate (Larmor)?
  2. Draw and choose symbols. One sketch with the field directions, the area vectors and the frame.
  3. Write the law before the numbers. emf = −N dΦ/dt first; then substitute.
  4. Carry units. If tesla times square meter per second does not come out as volts, something is wrong.
  5. Estimate. Round every number to one digit and see whether the answer is within a factor of 3 of your exact result.

Worked solutions

1. Induction. The flux through each turn is Φ = BA, with A = 25 × 10⁻⁴ m². It changes by ΔΦ = 0.80 × 2.5 × 10⁻³ = 2.0 × 10⁻³ Wb in 0.040 s, so |emf| = N ΔΦ/Δt = 200 × 2.0 × 10⁻³ / 0.040 = 10 V. By Lenz's law, the induced current tries to keep the field from falling, so it circulates in the same sense as the decaying field.

2. Displacement current. Maxwell's term is I_d = ε₀ dΦ_E/dt = ε₀ A dE/dt. With ε₀ = 8.854 × 10⁻¹² F/m: I_d = 8.854 × 10⁻¹² × 0.020 × 1.0 × 10¹² = 0.177 A. This equals the conduction current that charges the plates, which is why Ampère's law stays consistent when the contour passes between them.

3. Laser. The area is π r² = π × (1.0 × 10⁻³)² = 3.14 × 10⁻⁶ m², so I = P/A = 2.0 × 10⁻³ / 3.14 × 10⁻⁶ = 637 W/m². For a plane wave I = ½ c ε₀ E₀², so E₀ = √(2I/(c ε₀)) = √(2 × 637 / 2.654 × 10⁻³) ≈ 693 V/m. The magnetic amplitude is B₀ = E₀/c ≈ 2.3 μT. A tiny laser pointer has an electric field much larger than most static fields you meet indoors.

4. Polarizers. The first polarizer passes half of unpolarized light: 120/2 = 60 W/m². Malus's law for the second gives 60 cos²30° = 60 × 0.75 = 45 W/m².

5. Reflection. At normal incidence r = (1 − n)/(1 + n) = −0.5/2.5 = −0.20 and R = r² = 0.040. The reflected power is 0.040 × 5.0 = 0.20 mW, and 4.8 mW is transmitted. The minus sign means a half-wave phase jump, but the power does not care.

6. Skin depth. δ = √(2/(μ₀ σ ω)) with ω = 2π × 10⁴ = 6.283 × 10⁴ rad/s. The product μ₀ σ ω = 1.257 × 10⁻⁶ × 3.5 × 10⁷ × 6.283 × 10⁴ = 2.76 × 10⁶, so δ = √(7.25 × 10⁻⁷) = 0.85 mm. At three skin depths the field has fallen to e⁻³ ≈ 5% of its surface value, about 2.6 mm.

7. Dipole radiation. ω = 2π × 10⁷ = 6.283 × 10⁷ rad/s. The time-averaged power is P = μ₀ p₀² ω⁴ / (12 π c). Since ω⁴ = 1.558 × 10³¹, P = 1.257 × 10⁻⁶ × 10⁻¹⁸ × 1.558 × 10³¹ / (12π × 2.998 × 10⁸) ≈ 1.7 × 10⁻³ W. The wavelength is 30 m, so the dipole is tiny compared with it, as the formula assumes.

8. Friis link. The wavelength is λ = c/f = 0.333 m. The free-space factor is (λ/(4π d))² = (0.333/6283)² = 2.81 × 10⁻⁹. Multiplying by the gains, 1.64² = 2.69, gives 7.6 × 10⁻⁹, so P_r ≈ 7.6 nW, which is −51.2 dBm. Free-space path loss alone is 85.5 dB; the two antennas buy back about 4.3 dB.

9. Boost. With β = 0.80, γ = 1/√(1 − 0.64) = 1.667. The transformation for a boost along x gives E'_y = −γ β c B_z and B'_z = γ B_z (the sign follows the convention E' = γ(E + v × B)). So |E'| = 1.667 × 0.80 × 2.998 × 10⁸ × 0.50 = 2.0 × 10⁸ V/m, and B' = 0.83 T. Check the invariant c²B² − E²: it is 0.25 c² T² in the first frame, and 0.694 c² − 0.444 c² = 0.25 c² in the second. A purely magnetic field in one frame has an electric field in another.

10. Retardation. The delay is t = d/c = 2.0 × 10¹¹ / 2.998 × 10⁸ = 667 s ≈ 11.1 min. The Poynting flux of a point source falls as 1/r², so doubling the distance quarters it. Mission controllers therefore plan commands knowing the answer to each is more than 22 minutes away.

"The frame with no E field has no electric effects." A particle at rest in the frame of problem 9 sees E' ≠ 0 and feels a force. Fields mix when you change frames, so whether a field is "electric" or "magnetic" is frame dependent. "Intensity uses the peak field." It uses E₀²/2, or E_rms². "Skin depth is where the field vanishes." It is where the amplitude falls by 1/e, about 37%.

Extension problems

Once the ten are done, try these four. Answers follow.

  1. Light pressure. Sunlight at Earth has intensity 1361 W/m². What is the radiation pressure on a perfectly absorbing and a perfectly reflecting panel facing the Sun?
  2. Peak fields of sunlight. What are the peak electric and magnetic amplitudes of that sunlight?
  3. Brewster and critical angles. For glass n = 1.5 in air, find Brewster's angle for light entering the glass, and the critical angle for light leaving it.
  4. Copper skin depth at 1 GHz. Using σ = 5.8 × 10⁷ S/m, find δ. Why is a copper plating a few micrometers thick enough for microwave circuits?

Answers. (11) Absorber: P = I/c = 4.54 μPa; reflector: 2I/c = 9.08 μPa. (12) E₀ = √(2I/(cε₀)) ≈ 1.01 kV/m, B₀ = E₀/c ≈ 3.4 μT. (13) Brewster: arctan 1.5 = 56.3°; critical: arcsin(1/1.5) = 41.8°. (14) δ = 2.1 μm; currents flow almost entirely within a few skin depths of the surface, so extra thickness adds nothing but cost.

Try it

Python Check your answers

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Python Your own solver sheet

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Python Extension problems 11 to 14

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Check your understanding

Quick check · 7 questions

of 7 answered You scored / 7 · perfect!

  1. 1. In problem 1, what is the average emf?

    emf = N A ΔB/Δt = 200 × 2.5 × 10⁻³ × 0.80 / 0.040 = 10 V.
  2. 2. In problem 4, the intensity after both polarizers is about

    60 × cos²30° = 60 × 0.75 = 45 W/m².
  3. 3. In problem 5, the reflected power is

    R = 0.04, and 0.04 × 5.0 mW = 0.20 mW.
  4. 4. In problem 9, the magnetic field in the moving frame is

    γ = 1.667, so B'_z = 1.667 × 0.50 = 0.83 T.
  5. 5. Doubling the distance to a source in vacuum changes the Poynting flux by

    Intensity from a point source falls as 1/r².
  6. 6. In problem 6, why is the skin depth only 0.85 mm for aluminum at 10 kHz?

    δ = √(2/(μ₀σω)) falls as conductivity and frequency rise.
  7. 7. A perfectly reflecting panel in sunlight (1361 W/m²) feels a pressure of about

    Reflection reverses the momentum, so P = 2I/c = 9.1 μPa.

Summary

  • Induction, displacement current, Poynting flux, polarization, reflection, skin depth, radiation, Friis and boosts: each reduces to one formula.
  • Keep units explicit and sanity-check orders of magnitude.
  • Use the solver sheet to explore variants.

Next: Glossary