Skip to content
Tutorials Center
My learning

Topics

Differential Geometry Tutorial

Learn Differential Geometry step by step: 44 lessons in 9 chapters with examples, quizzes, diagrams and practice.

Start learning →

of lessons completed

Getting Started

  1. 1 Course Map: How This Differential Geometry Course Works See the whole differential geometry course at a glance: who it is for, what you need first, how the nine chapters fit together, and how to study.
  2. 2 What Is Differential Geometry? A friendly tour of differential geometry: local versus global, intrinsic versus extrinsic, and why a sphere cannot be flattened without stretching it.
  3. 3 A Calculus and Vector Toolkit Revise the dot product, cross product, vector derivatives and the chain rule, with the one fact about unit vectors that powers all of curve theory.
  4. 4 Plotting Curves and Surfaces with Python Learn the three plotting recipes used in every lesson: sampling a curve, building a surface grid with meshgrid, and drawing tangent vectors with quiver.
  5. 5 Chapter 1 Review: Getting Started A one-page recap of chapter 1: vectors, derivatives, parametrizations and plotting, with a ten-question quiz mixing all the lessons.

Curves in the Plane and Space

  1. 6 Chapter 2 Overview: Curves in the Plane and Space Preview of chapter 2: how to describe curves with parametrizations, measure their length, and capture bending and twisting with curvature and torsion.
  2. 7 Parametrized Curves and Tangent Vectors Learn what a parametrized curve is, how to find tangent vectors and tangent lines, what regular means, and why cusps and reparametrizations matter.
  3. 8 Arc Length and Unit-Speed Parametrization Derive the arc-length formula from chords, compute lengths for graphs, helices and cycloids, and learn why the unit-speed parametrization simplifies curve theory.
  4. 9 Curvature of Plane Curves Define signed curvature of a plane curve, derive the formulas for graphs and parametrized curves, draw osculating circles and rebuild a curve from its curvature.
  5. 10 Space Curves and the Frenet Frame Build the Frenet frame T, N, B along a space curve, define curvature and torsion, derive the Frenet-Serret equations and compute them for the helix.
  6. 11 Chapter 2 Review: Curves One-page recap of chapter 2 formulas for arc length, tangent, curvature, torsion and the Frenet frame, with a nine-question mixed quiz.

Surfaces and Parametrizations

  1. 12 Chapter 3 Overview: Surfaces and Parametrizations Preview of chapter 3: how surfaces are described by patches r(u, v), how tangent vectors and normals arise, and what makes a surface regular.
  2. 13 Parametrized Surfaces and Coordinate Curves Learn how a surface patch r(u, v) paints a flat grid onto a surface, how coordinate curves and curves on surfaces work, and how to parametrize sphere, cylinder and cone.
  3. 14 Tangent Planes and Normal Vectors Find the tangent plane of a surface from r_u and r_v, compute the unit normal for patches, graphs and level sets, and understand orientation and change of parameters.
  4. 15 Regular Surfaces and Standard Examples Define regular surfaces, test them with r_u x r_v, and work through graphs, surfaces of revolution, the helicoid, the torus and the cone, including where parametrizations fail.
  5. 16 Chapter 3 Review: Surfaces One-page recap of chapter 3: patches, tangent vectors, normals, regularity and standard parametrizations, with a nine-question mixed quiz.

The First and Second Fundamental Forms

  1. 17 Chapter 4 Overview: The First and Second Fundamental Forms Preview of chapter 4: how the first fundamental form measures lengths, angles and areas, and how the second fundamental form measures bending in space.
  2. 18 The First Fundamental Form Derive the first fundamental form E duΒ² + 2F du dv + G dvΒ², compute it for plane, cylinder, sphere, graph and torus, and see why a cylinder is intrinsically flat.
  3. 19 Area, Angles and the Problem of Flat Maps Use E, F, G to compute areas and angles on surfaces, check the sphere and torus formulas, and see why no flat map of the Earth can preserve everything.
  4. 20 The Second Fundamental Form and Normal Curvature Define the second fundamental form e duΒ² + 2f du dv + g dvΒ², show how it measures bending away from the tangent plane, and compute it for graphs, cylinders and spheres.
  5. 21 Chapter 4 Review: The Fundamental Forms One-page recap of chapter 4: coefficients E, F, G and e, f, g for the plane, cylinder and sphere, plus a ten-question quiz mixing all four lessons.

Curvature

  1. 22 Chapter 5 overview: what curvature measures A tour of Chapter 5: how normal, principal, Gaussian and mean curvature describe the bending of a surface, and why Gauss called one result remarkable.
  2. 23 Normal curvature and principal curvatures Slice a surface in every direction, measure the bending of each slice, and discover principal curvatures, principal directions and Euler's formula with worked examples.
  3. 24 Gaussian and mean curvature Combine the principal curvatures into K and H, classify points as elliptic, hyperbolic or parabolic, compute both for a torus, and meet minimal surfaces.
  4. 25 The Theorema Egregium: curvature without leaving the surface Gauss's remarkable theorem says Gaussian curvature depends only on lengths measured inside the surface. See why, check it with code, and learn why no flat map of Earth is perfect.
  5. 26 Chapter 5 review: curvature Review Chapter 5 with a one-page picture, a recap table, a numerical check on an ellipsoid, a practice drill and ten mixed questions on curvature.

Geodesics

  1. 27 Chapter 6 overview: geodesics A tour of Chapter 6: what a straight line becomes on a curved surface, why airplanes fly curved-looking routes, and how geodesics and parallel transport are computed.
  2. 28 Geodesic equations and classic examples Derive the geodesic equations with Christoffel symbols, then solve them on the plane, cylinder, sphere and torus and use Clairaut's relation on surfaces of revolution.
  3. 29 Parallel transport and holonomy Carry a vector along a curve without turning it, see why it returns rotated after a loop on a sphere, and verify that the rotation equals the enclosed Gaussian curvature.
  4. 30 Chapter 6 review: geodesics Review Chapter 6 with a one-page picture, a recap table, a numerical Clairaut check on a vase-shaped surface, a triangle holonomy calculator and ten mixed questions.

The Gauss-Bonnet Theorem

  1. 31 Chapter 7 overview: the Gauss-Bonnet theorem A tour of Chapter 7: how total Gaussian curvature of a closed surface equals 2Ο€ times its Euler characteristic, with polyhedra as a first example.
  2. 32 Geodesic curvature and the local Gauss-Bonnet theorem Split a curve's bending into normal and geodesic parts, state the local Gauss-Bonnet theorem for a region, and use it on caps and triangles on a sphere and a hyperbolic plane.
  3. 33 The global Gauss-Bonnet theorem and the Euler characteristic Prove that total curvature of a closed surface equals 2Ο€ times its Euler characteristic, learn Ο‡ = V βˆ’ E + F, and test it on ellipsoids, bumpy spheres and tori by code.
  4. 34 Chapter 7 review: Gauss-Bonnet Review Chapter 7 with a one-page picture, a table of the three forms of Gauss-Bonnet, an annulus check on a torus, a polyhedron defect table and ten mixed questions.

Manifolds and Beyond

  1. 35 Chapter 8 overview: manifolds and beyond A tour of Chapter 8: how everything you learned on surfaces generalizes to manifolds of any dimension, with charts, tangent spaces, metrics and curvature tensors.
  2. 36 Smooth manifolds and tangent spaces Learn the definition of a smooth manifold through charts and transition maps, see tangent vectors as velocities of curves, and check how components transform with code.
  3. 37 Riemannian metrics and the curvature tensor Put a metric on a manifold, recover lengths, geodesics and parallel transport in any dimension, and compute Riemann, Ricci and scalar curvature for spheres and the hyperbolic plane.
  4. 38 Chapter 8 review: manifolds Review Chapter 8 with a one-page picture, a recap table, a curvature calculator tested on a torus and the PoincarΓ© disk, a space-form table and ten mixed questions.

Projects and Practice

  1. 39 Project: curvature of a triangle mesh Build a sphere mesh and a torus mesh, estimate Gaussian curvature from angle defects and mean curvature from the cotangent Laplacian, and compare with exact formulas.
  2. 40 Project: build a geodesic solver Write a general geodesic solver that takes any parametrized surface, computes Christoffel symbols symbolically, integrates numerically and finds shortest paths by shooting.
  3. 41 Practice set: differential geometry of surfaces Ten practice problems on normal curvature, K and H, geodesics, holonomy, Gauss-Bonnet and the hyperbolic plane, with worked solutions, a code checker and a self-test.
  4. 42 Glossary of differential geometry A glossary of the key terms of differential geometry, from arc length and Frenet frames to geodesics, Gauss-Bonnet and Riemann curvature, with a searchable lookup and flashcards.
  5. 43 Differential geometry cheat sheet One-page cheat sheet of the key formulas of differential geometry of surfaces: fundamental forms, curvatures, Egregium, geodesics, Gauss-Bonnet and manifolds, plus a calculator.
  6. 44 Where to go next after differential geometry A guide to what comes after this course: Riemannian geometry, general relativity, topology, geometric analysis, graphics, robotics and machine learning, with links to related tracks.