Skip to content
Tutorials Center
My learning

Topics

Lesson 28 of 39 · Acids and Bases

Weak Acids, Weak Bases and Ka

Calculate the pH of weak acids and weak bases using Ka and Kb, ICE tables, percent ionization and the Ka times Kb equals Kw relation.

A strong acid ionizes completely. A weak acid ionizes only partly: most of the molecules stay intact. Acetic acid in vinegar and carbonic acid in fizzy water are everyday examples. Weak acids are equilibrium systems, so everything you learned in the last lessons applies.

The acid dissociation constant

For a weak acid HA in water:

HA + H2O ⇌ H3O⁺ + A⁻

Ka = [H3O⁺][A⁻] / [HA]

Water is the solvent and is left out of the expression. A bigger Ka means a stronger acid. Because Ka values span many powers of ten, we also use pKa = −log10 Ka. A smaller pKa means a stronger acid.

Acid Ka (25 °C, typical values) pKa
HF 6.8 × 10⁻⁴ 3.17
CH₃COOH 1.8 × 10⁻⁵ 4.74
HCN 6.2 × 10⁻¹⁰ 9.21

Different books quote slightly different values. Use the numbers your course gives you.

pH of a weak acid

Find the pH of 0.10 M acetic acid, Ka = 1.8 × 10⁻⁵. Use an ICE table:

[HA] [H₃O⁺] [A⁻]
Initial 0.10 ≈ 0 0
Change −x +x +x
Equilibrium 0.10 − x x x

1.8 × 10⁻⁵ = x² / (0.10 − x)

Approximating 0.10 − x ≈ 0.10 gives x = √(1.8 × 10⁻⁶) = 1.34 × 10⁻³. The exact quadratic solution is 1.33 × 10⁻³, so the approximation is excellent (x is 1.3 percent of 0.10). Then pH = −log(1.33 × 10⁻³) = 2.88.

Percent ionization is 100 × x / [HA]₀, here about 1.3 percent. Weak acids ionize more as they get more dilute. This follows from Le Chatelier's principle: dilution pushes the equilibrium toward more particles.

Python pH and percent ionization of a weak acid

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Notice how pH rises only slowly with dilution, while the percent ionization climbs from well under 1 percent to a few tens of percent.

Weak bases and Kb

A weak base B accepts a proton from water:

B + H2O ⇌ BH⁺ + OH⁻, Kb = [BH⁺][OH⁻] / [B]

For ammonia, Kb = 1.8 × 10⁻⁵ (a typical value). For 0.10 M NH₃ the ICE table is identical, but x is [OH⁻]:

x = 1.33 × 10⁻³ M, pOH = 2.88, pH = 14.00 − 2.88 = 11.12.

Ka times Kb equals Kw

A conjugate acid–base pair obeys a neat relation:

Ka × Kb = Kw and pKa + pKb = 14.00 (at 25 °C)

So if you know Ka of acetic acid, you can find Kb of acetate: Kb = 1.0 × 10⁻¹⁴ / 1.8 × 10⁻⁵ = 5.6 × 10⁻¹⁰. Acetate is a very weak base, but a solution of sodium acetate is slightly basic.

Python Weak bases, conjugates and salt solutions

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Salts and pH

A dissolved salt can change pH when one of its ions is a conjugate of a weak acid or base:

  • Cation of a strong base and anion of a strong acid (NaCl): neutral.
  • Anion of a weak acid (CH₃COO⁻, F⁻, CN⁻): basic.
  • Cation of a weak base (NH₄⁺): acidic.
  • Small, highly charged metal ions such as Al³⁺ also make solutions acidic by pulling electrons from the water around them.

Polyprotic acids

An acid with more than one ionizable proton loses them in steps, each with its own Ka. Sulfuric acid's first step is strong. Carbonic acid has Ka1 ≈ 4.5 × 10⁻⁷ and Ka2 ≈ 4.7 × 10⁻¹¹ (typical values). Each later proton comes off far less easily, so the first step usually controls the pH.

Quick check before calculating: a weak acid solution's pH must be above the pH of a strong acid at the same concentration, and [H3O⁺] must be smaller than the starting acid concentration.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. Which acid is strongest?

    A larger Ka means greater ionization, so 1e-3 is the strongest.
  2. 2. For acetic acid with Ka = 1.8e-5, what is the conjugate base's Kb?

    Kb = Kw / Ka = 1.0e-14 / 1.8e-5 = 5.6e-10.
  3. 3. What happens to the percent ionization of a weak acid when it is diluted?

    Dilution shifts the equilibrium toward ionization, so a larger fraction of the acid ionizes.
  4. 4. A solution of sodium acetate in water is...

    Acetate is the conjugate base of a weak acid and accepts protons from water, producing a little hydroxide.

Summary

  • Ka = [H₃O⁺][A⁻]/[HA]; larger Ka or smaller pKa means a stronger acid.
  • Solve weak-acid and weak-base pH with an ICE table; check the 5 percent rule.
  • Percent ionization rises as the solution is diluted.
  • Ka × Kb = Kw for a conjugate pair.
  • Salts of weak acids are basic, salts of weak bases are acidic.

Next: Acid–Base Titrations