Skip to content
Tutorials Center
My learning

Topics

Lesson 6 of 39 · Enthalpy and Thermochemistry

Specific Heat and Calorimetry

Use q = mcΔT, heat capacity and a coffee-cup calorimeter to measure heat, find final temperatures and calculate molar enthalpy of neutralization.

How do chemists measure the heat of a reaction? They let the reaction warm or cool a known mass of water and measure the temperature change. The method is called calorimetry, and it rests on one equation, q = m c ΔT. This lesson shows how to use it for heating, mixing and reacting.

Specific heat capacity

The specific heat capacity (symbol c) of a substance is the energy needed to raise the temperature of 1 g of it by 1 °C (or 1 K). Its units are J/(g·°C), also written J g⁻¹ K⁻¹.

The heat transferred when a sample of mass m changes temperature by ΔT is

q = m × c × ΔT, with ΔT = T_final - T_initial.

A positive q means the sample absorbed heat (it warmed up); a negative q means it released heat (it cooled).

Approximate specific heats near room temperature:

Substance c in J/(g·°C)
Liquid water 4.184
Aluminum 0.897
Iron 0.449
Copper 0.385

Water's value is unusually high. That is why water warms and cools slowly, and why it is an excellent liquid for calorimeters.

The heat capacity C of a whole object is C = m c, in J/°C, so q = C ΔT. The molar heat capacity is per mole, in J/(mol·°C).

Python Heat needed to warm samples

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Mixing a hot object into water

If a hot metal goes into cool water inside an insulated container, the heat lost by the metal equals the heat gained by the water:

q_metal + q_water = 0

Worked example

A 50.0 g piece of copper at 100.0 °C is dropped into 100.0 g of water at 20.0 °C. Find the final temperature T.

50.0 × 0.385 × (T - 100.0) + 100.0 × 4.184 × (T - 20.0) = 0

Expand: 19.25 T - 1925 + 418.4 T - 8368 = 0, so 437.65 T = 10,293 and T ≈ 23.5 °C.

The water warms by only about 3.5 °C because water's heat capacity is so large.

Python Solve for the final temperature

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The coffee-cup calorimeter

A coffee-cup calorimeter is two nested polystyrene cups with a lid, a thermometer and a stirrer. It is open to the air (so pressure is constant) and well insulated. A reaction runs in solution. The solution absorbs or supplies the heat, so:

q_reaction = - q_solution = - m c ΔT

The sign flips: if the solution warms, the reaction released heat (q_reaction negative, exothermic). Assumptions: the solution has the specific heat of water (4.184 J/g·°C) and a density of about 1.00 g/mL, and the cups themselves absorb negligible heat.

Because the pressure is constant, ΔH = q_reaction. To report a molar value, divide by the moles of the limiting reactant.

Worked example: neutralization

The numbers below are an illustrative problem, not a lab record. 50.0 mL of 1.00 mol/L HCl and 50.0 mL of 1.00 mol/L NaOH, both at 21.0 °C, are mixed. The temperature rises to 27.5 °C.

  1. Mass of solution: 100.0 mL × 1.00 g/mL = 100.0 g.
  2. q_solution = 100.0 × 4.184 × 6.5 = 2720 J.
  3. q_reaction = -2720 J.
  4. Moles of water formed (limiting reactant): 0.0500 L × 1.00 mol/L = 0.0500 mol.
  5. ΔH = -2720 J / 0.0500 mol = -54,400 J/mol ≈ -54.4 kJ/mol.

Careful experiments give values near -57 kJ/mol for strong acid with strong base.

Python A calorimeter calculation tool

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Real calorimeters lose some heat to the cup, the thermometer and the air. Teachers often ask you to account for the calorimeter's own heat capacity (C_cal) by adding it to the solution's: q_rxn = -(m c + C_cal) ΔT. Always check which assumptions a problem makes.

Bomb calorimeters

For combustion, a bomb calorimeter burns a sample in a sealed steel container filled with oxygen, immersed in water. The volume is constant, so the heat measured is ΔU, not ΔH. A chemist converts to ΔH using ΔH = ΔU + Δn_gas R T from the previous lesson.

Check your understanding

Quick check · 5 questions

of 5 answered You scored / 5 · perfect!

  1. 1. How much heat is needed to warm 200 g of water from 20.0 °C to 30.0 °C? (c = 4.184 J/(g·°C))

    q = m c ΔT = 200 × 4.184 × 10.0 = 8368 J.
  2. 2. In a coffee-cup calorimeter the solution warms up. The reaction is

    The solution gained heat, which came from the reaction, so the reaction released heat: it is exothermic.
  3. 3. Why is water used so often in calorimeters?

    Water's high specific heat means a measurable temperature change absorbs a large amount of heat and the result is smooth and well defined.
  4. 4. A bomb calorimeter measures directly

    The sealed vessel has constant volume, so no pressure-volume work occurs and the heat equals ΔU.
  5. 5. A 10.0 g sample warms from 25.0 °C to 35.0 °C after absorbing 450 J. What is its specific heat capacity?

    c = q / (m ΔT) = 450 / (10.0 × 10.0) = 4.5 J/(g·°C).

Summary

  • q = m c ΔT; water has c = 4.184 J/(g·°C).
  • In an insulated mixture, heat lost by the hot part equals heat gained by the cold part.
  • In a coffee-cup calorimeter, q_reaction = -q_solution, and ΔH = q at constant pressure.
  • Molar ΔH is the reaction heat divided by moles of the limiting reactant.
  • A bomb calorimeter measures ΔU (constant volume).

Next: Thermochemical Equations