Skip to content
Tutorials Center
My learning

Topics

Lesson 22 of 39 · Chemical Equilibrium

The Equilibrium Constant Expression: Kc and Kp

Write equilibrium constant expressions for any reaction, convert between Kc and Kp, and combine or reverse reactions with confidence.

At equilibrium, the concentrations of reactants and products are not random. For a given reaction at a given temperature they always satisfy one fixed relationship. The number that captures it is the equilibrium constant, written K. If you know K you can predict whether a reaction favors products or reactants, and you can calculate the composition of an equilibrium mixture.

Writing the expression

For the general reaction a A + b B ⇌ c C + d D, the equilibrium constant in terms of concentrations is:

Kc = [C]^c [D]^d / ([A]^a [B]^b)

Square brackets mean concentration in mol/L at equilibrium. Products go on top, reactants on the bottom, and each concentration is raised to the power of its coefficient in the balanced equation.

Example, the Haber process:

N2(g) + 3 H2(g) ⇌ 2 NH3(g)

Kc = [NH3]² / ([N2] [H2]³)

Because K comes from a balanced equation, writing the reaction with different coefficients changes the value of K. Always state the equation with the number.

Which species appear

  • Gases and dissolved species (aq) appear.
  • Pure solids and pure liquids do not appear. Their "concentration" is constant and is absorbed into K.
  • Water as the solvent in dilute solution is left out, too.

Example: CaCO3(s) ⇌ CaO(s) + CO2(g) has Kc = [CO2]. Only the gas appears.

Strictly, K is defined with activities and has no units. Textbooks at this level use concentrations and often omit units. If your course asks for units, work them out from the expression. For Kc = [NH3]² / ([N2][H2]³) the units are L² mol⁻².

Kp for gases

For gas-phase reactions we may use partial pressures instead:

Kp = (P_C)^c (P_D)^d / ((P_A)^a (P_B)^b)

Kc and Kp are linked by the ideal gas law:

Kp = Kc × (R T)^Δn

where Δn is the moles of gaseous products minus the moles of gaseous reactants in the balanced equation. If pressures are in atm, use R = 0.08206 L atm mol⁻¹ K⁻¹ and temperature in kelvin. (If pressures are in bar or kPa, use the matching R, and note that Kp then has a different numerical value.)

For the Haber process Δn = 2 − (1 + 3) = −2.

Size of K

K Meaning
much greater than 1 (say above 10³) products favored at equilibrium
near 1 significant amounts of both
much less than 1 (say below 10⁻³) reactants favored

K says nothing about speed. A reaction with a huge K can still be extremely slow without a catalyst.

Python Compute Kc and convert to Kp

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Manipulating K

When you change how an equation is written, K changes in predictable ways:

Change New K
Reverse the equation 1 / K
Multiply all coefficients by n K^n
Add two equations multiply their K values

Example: if N2O4 ⇌ 2 NO2 has K1, then 2 NO2 ⇌ N2O4 has 1/K1, and 2 N2O4 ⇌ 4 NO2 has K1².

Adding equations works like this. If

  • A ⇌ B has K1
  • B ⇌ C has K2

then A ⇌ C has K = K1 × K2.

Python Combining equilibrium constants

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Reading K from a table

Suppose, for a different reaction H2(g) + I2(g) ⇌ 2 HI(g), a lab measures equilibrium concentrations of 0.22 M H₂, 0.22 M I₂ and 1.56 M HI. Then

Kc = [HI]² / ([H2][I2]) = 1.56² / (0.22 × 0.22) ≈ 50

Because the number of gas moles is the same on both sides (Δn = 0), Kp = Kc in this case. Whenever Δn = 0, the two constants are numerically equal.

Common mistakes

  • Including a solid or pure liquid in the expression.
  • Forgetting the coefficients as exponents.
  • Using initial rather than equilibrium concentrations.
  • Using a K value measured at one temperature for a mixture at another. K depends on temperature (and only on temperature).
  • Mixing up Kc and Kp.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. What is the Kc expression for 2 SO2(g) + O2(g) ⇌ 2 SO3(g)?

    Products over reactants, each raised to its coefficient: [SO3]^2 over [SO2]^2[O2].
  2. 2. For CaCO3(s) ⇌ CaO(s) + CO2(g), which expression is correct?

    Pure solids are left out, so only the gas appears.
  3. 3. If K for A ⇌ B is 5.0, what is K for B ⇌ A?

    Reversing an equation gives the reciprocal: 1/5.0 = 0.20.
  4. 4. For which reaction is Kp equal to Kc numerically?

    H2 + I2 ⇌ 2 HI has the same number of gas moles on each side, so delta n = 0 and (RT)^0 = 1.

Summary

  • Kc is products over reactants, each to the power of its coefficient, using equilibrium concentrations.
  • Pure solids and liquids are left out of K.
  • Kp = Kc (RT)^Δn links the two constants for gases.
  • Reversing an equation gives 1/K, multiplying it by n gives K^n, adding equations multiplies K values.
  • K depends only on temperature and says nothing about speed.

Next: The Reaction Quotient Q