Skip to content
Tutorials Center
My learning

Topics

Lesson 8 of 39 · Enthalpy and Thermochemistry

Hess's Law

Use Hess's law to find enthalpy changes that cannot be measured directly by combining known reactions, with step-by-step examples and a runnable calculator.

Some reactions are hard to measure directly. Burning carbon to make carbon monoxide, for example, always produces some carbon dioxide too, so a calorimeter cannot give a clean ΔH. Hess's law gives a way around this: combine reactions whose enthalpy changes you can measure.

The law

Hess's law: the total enthalpy change of a reaction is the same whether it happens in one step or in several steps.

This is a direct result of enthalpy being a state function: ΔH depends only on the start and the end, not on the route. It is named after Germain Hess, a chemist who published it in 1840.

Practically, it means you can add chemical equations like algebra and add their ΔH values.

flowchart TD
    A["C(s) + O₂(g)"] -->|"ΔH₁ = -393.5 kJ"| C["CO₂(g)"]
    A -->|"ΔH₂ = ?"| B["CO(g) + ½ O₂(g)"]
    B -->|"ΔH₃ = -283.0 kJ"| C

Two routes from carbon plus oxygen to carbon dioxide: the direct route, and via carbon monoxide.

The recipe

  1. Write the target equation.
  2. Take each given equation. If a substance in the target appears on the wrong side, reverse the equation (flip the sign of ΔH).
  3. If the target has a different number of moles, multiply the equation (multiply ΔH).
  4. Add the equations. Species that appear on both sides cancel.
  5. Add the ΔH values. Check that the sum matches the target equation.

Worked example 1: carbon to carbon monoxide

Target: C(s) + ½ O₂(g) → CO(g), ΔH = ?

Given:

  1. C(s) + O₂(g) → CO₂(g), ΔH₁ = -393.5 kJ
  2. CO(g) + ½ O₂(g) → CO₂(g), ΔH₂ = -283.0 kJ

CO is a product in the target, but a reactant in equation 2. Reverse equation 2:

2′. CO₂(g) → CO(g) + ½ O₂(g), ΔH = +283.0 kJ

Add equation 1 and 2′:

C(s) + O₂(g) + CO₂(g) → CO₂(g) + CO(g) + ½ O₂(g)

Cancel CO₂ on both sides, and ½ O₂: C(s) + ½ O₂(g) → CO(g). That is the target.

ΔH = -393.5 + 283.0 = -110.5 kJ

Worked example 2: methane from its elements

Target: C(s) + 2 H₂(g) → CH₄(g).

Given (combustion data that are easy to measure):

  1. C(s) + O₂(g) → CO₂(g), ΔH = -393.5 kJ
  2. H₂(g) + ½ O₂(g) → H₂O(l), ΔH = -285.8 kJ
  3. CH₄(g) + 2 O₂(g) → CO₂(g) + 2 H₂O(l), ΔH = -890.3 kJ

Plan: keep equation 1 as is (C on the left); multiply equation 2 by 2 (2 H₂ on the left); reverse equation 3 (CH₄ on the right).

  • Eq 1: ΔH = -393.5
  • 2 × Eq 2: ΔH = -571.6
  • Reversed Eq 3: ΔH = +890.3

ΔH = -393.5 - 571.6 + 890.3 = -74.8 kJ

Check by adding: carbon dioxide and water cancel between the equations, and C + 2 H₂ → CH₄ remains.

Python A Hess's law calculator

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Worked example 3: checking data for consistency

Hess's law also lets you check tabulated data. Forming water vapor directly from the elements must give the same total as forming liquid water and then vaporizing it (all at 298 K):

  • Route 1: H₂(g) + ½ O₂(g) → H₂O(g), ΔH = -241.8 kJ.
  • Route 2: H₂(g) + ½ O₂(g) → H₂O(l), ΔH = -285.8 kJ, then H₂O(l) → H₂O(g), ΔH = +44.0 kJ.

Route 2 totals -285.8 + 44.0 = -241.8 kJ, matching route 1. If two routes disagreed, a value would be wrong.

Python Compare two routes

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Hess's law assumes every step happens at the same temperature and pressure. The heat of vaporization of water is 44.0 kJ/mol at 298 K but 40.7 kJ/mol at 373 K, so mixing temperatures would break the check.

Common mistakes

  • Forgetting to flip the sign when reversing.
  • Forgetting to multiply ΔH when multiplying coefficients.
  • Ignoring physical states. CO₂(g) and CO₂(s) are different species with different enthalpies.
  • Adding equations that do not cancel properly. After adding, verify the species list equals your target equation.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. Hess's law is true because enthalpy is

    ΔH depends only on the initial and final states, not on the path, so different routes give the same total.
  2. 2. A → B has ΔH = +30 kJ and B → C has ΔH = -50 kJ. What is ΔH for A → C?

    Add the two steps: +30 + (-50) = -20 kJ.
  3. 3. You need 2 A → 2 B, and you know A → B has ΔH = -15 kJ. The ΔH you want is

    Multiply the equation by 2 and ΔH by 2: 2 × (-15) = -30 kJ.
  4. 4. To use an equation in which the species you need is on the wrong side, you should

    Reversing swaps reactants and products, and the sign of ΔH changes with it.

Summary

  • Hess's law: ΔH for a reaction is the same by any route, because H is a state function.
  • Add equations and their ΔH values to build a target reaction.
  • Reverse an equation: flip the sign. Multiply an equation: multiply ΔH.
  • Check that intermediates cancel and states match.
  • You can find ΔH values that are hard to measure directly, such as C + ½ O₂ → CO (-110.5 kJ).

Next: Enthalpy of Formation