Skip to content
Tutorials Center
My learning

Topics

Lesson 34 of 39 · Solubility and Buffers

Solubility Equilibria and the Solubility Product Ksp

Use the solubility product Ksp to find the molar solubility of sparingly soluble salts and to compare their solubilities, with worked examples.

Table salt dissolves in large amounts, but silver chloride barely dissolves at all. Between those extremes lie sparingly soluble salts, such as lead(II) iodide or calcium fluoride. When such a solid sits in water, a tiny amount dissolves and an equilibrium forms between the solid and its ions. That equilibrium has its own constant.

The solubility product

For AgCl(s) ⇌ Ag⁺(aq) + Cl⁻(aq):

Ksp = [Ag⁺][Cl⁻]

The solid is left out of the expression, as always for pure solids. For a general salt AmBn:

AmBn(s) ⇌ m A^(n+) + n B^(m−), Ksp = [A^(n+)]^m [B^(m−)]^n

Here are some typical textbook values at 25 °C. Sources differ in the second digit, so use the values your course gives.

Salt Ksp (typical)
AgCl 1.8 × 10⁻¹⁰
AgBr 5.4 × 10⁻¹³
PbI₂ 9.8 × 10⁻⁹
CaF₂ 3.9 × 10⁻¹¹
Ag₂CrO₄ 1.1 × 10⁻¹²

Molar solubility from Ksp

The molar solubility s is the number of moles of salt that dissolve per liter of saturated solution.

AgCl. Each dissolved formula unit gives one Ag⁺ and one Cl⁻, so [Ag⁺] = [Cl⁻] = s:

Ksp = s², so s = √(1.8 × 10⁻¹⁰) = 1.3 × 10⁻⁵ mol/L.

PbI₂. PbI2(s) ⇌ Pb²⁺ + 2 I⁻, so [Pb²⁺] = s and [I⁻] = 2s:

Ksp = s (2s)² = 4 s³, so s = (Ksp / 4)^(1/3) = (9.8 × 10⁻⁹ / 4)^(1/3) = 1.35 × 10⁻³ mol/L.

Salts with different formulas (different numbers of ions) must be compared by their solubilities. Comparing Ksp values directly is valid only when the salts have the same ion ratio, such as AgCl and AgBr.

The general formula for a salt giving m cations and n anions:

s = (Ksp / (m^m × n^n))^(1/(m+n))

Python Molar solubility from Ksp

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Compare the last line with AgCl. Silver chromate has a much smaller Ksp (1.1 × 10⁻¹² against 1.8 × 10⁻¹⁰), yet its molar solubility (about 6.5 × 10⁻⁵ M) is larger than that of AgCl (1.3 × 10⁻⁵ M). A smaller Ksp does not always mean a smaller solubility when the formulas differ.

From solubility to Ksp

You can also run the calculation the other way. Suppose a saturated solution of Ca(OH)2 has [OH⁻] = 0.025 M (a practice value). Then [Ca²⁺] = 0.0125 M, so Ksp = 0.0125 × 0.025² = 7.8 × 10⁻⁶.

If solubility is given in g/L, convert it to mol/L with the molar mass first. For instance, AgCl (M = 143.3 g/mol) dissolving to 1.9 mg per liter means 1.9×10⁻³ / 143.3 = 1.3×10⁻⁵ mol/L.

Python From a measured solubility back to Ksp

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Effect of temperature

For most salts, solubility rises with temperature, so Ksp increases. There are exceptions (for example calcium hydroxide and gases dissolving in water). Ksp is a constant only at a fixed temperature.

Complex ions and Ksp

When a metal ion can form a complex ion with a ligand, solubility can rise strongly. Silver chloride dissolves in aqueous ammonia because Ag⁺ is pulled into [Ag(NH3)2]⁺, removing silver ions from the equilibrium so more AgCl dissolves (Le Chatelier). This is why ammonia is used to test whether a white precipitate is silver chloride.

Ksp is defined for a saturated solution in equilibrium with undissolved solid. If no solid is present, Ksp does not apply, even if the ion product happens to equal Ksp.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. What is the Ksp expression for Ca3(PO4)2(s) ⇌ 3 Ca2+ + 2 PO4 3-?

    Each ion concentration is raised to its coefficient, and the solid is omitted.
  2. 2. AgCl has Ksp = 1.8e-10. What is its molar solubility in pure water (to 2 significant figures)?

    s = sqrt(Ksp) = sqrt(1.8e-10) = 1.3e-5 M.
  3. 3. For PbI2, if the molar solubility is s, what is [I-] in the saturated solution?

    Each formula unit releases two iodide ions, so [I-] = 2s.
  4. 4. Why can you not always compare solubilities by comparing Ksp values?

    A salt with the formula MX2 depends on s cubed while MX depends on s squared, so the Ksp values are not directly comparable.

Summary

  • Ksp is the equilibrium constant for a sparingly soluble salt dissolving; solids are not in the expression.
  • Molar solubility s follows from Ksp and the ion ratio: s = (Ksp / (m^m n^n))^(1/(m+n)).
  • Compare Ksp values directly only for salts with the same ion ratio.
  • Convert g/L to mol/L before computing Ksp from a measured solubility.
  • Complex-ion formation can raise solubility.

Next: The Common-Ion Effect and Precipitation