Skip to content
Tutorials Center
My learning

Topics

Lesson 15 of 39 ยท Reaction Rates

Reaction Rate Expressions

Define reaction rate, relate rates of change of reactants and products using stoichiometry, and compute average and instantaneous rates from concentration data.

Thermodynamics tells you whether a reaction is favorable. Kinetics asks a different question: how fast does it go? A firework explodes in a blink, iron rusts over months, and diamond turns to graphite so slowly that it never happens in a lifetime. The study of reaction speed is called chemical kinetics, and it starts with a precise definition of "rate".

What is a reaction rate?

The rate of reaction is how quickly the concentration of a reactant falls or of a product rises. It is measured in concentration per time, usually mol/(Lยทs), also written M/s (M means mol/L).

Concentrations are written in square brackets: [A] is the molar concentration of A in mol/L.

For A โ†’ B:

rate = โˆ’ฮ”[A]/ฮ”t = +ฮ”[B]/ฮ”t

The minus sign for the reactant is there because [A] falls, and we want the rate to be positive.

Stoichiometry matters

If the coefficients differ, species change at different speeds. For a general reaction aA + bB โ†’ cC + dD, the rate is defined so that it is the same whichever species you track:

rate = โˆ’(1/a) ฮ”[A]/ฮ”t = โˆ’(1/b) ฮ”[B]/ฮ”t = +(1/c) ฮ”[C]/ฮ”t = +(1/d) ฮ”[D]/ฮ”t

Worked example

For 2 Nโ‚‚Oโ‚… โ†’ 4 NOโ‚‚ + Oโ‚‚:

rate = โˆ’ยฝ ฮ”[Nโ‚‚Oโ‚…]/ฮ”t = +ยผ ฮ”[NOโ‚‚]/ฮ”t = +ฮ”[Oโ‚‚]/ฮ”t

If Nโ‚‚Oโ‚… disappears at 0.0040 M/s, the reaction rate is 0.0040 / 2 = 0.0020 M/s. Then NOโ‚‚ appears at 4 ร— 0.0020 = 0.0080 M/s, and Oโ‚‚ at 0.0020 M/s.

Python Relate the rates of different species

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Average rate

Measure concentrations at several times. The average rate over an interval is the change in concentration divided by the time:

average rate = โˆ’ฮ”[A]/ฮ”t = โˆ’([A]โ‚‚ โˆ’ [A]โ‚) / (tโ‚‚ โˆ’ tโ‚)

The numbers below are an illustrative data set, made up to show the method (they decay by about 20 percent every 10 s).

t (s) [A] (mol/L)
0 1.00
10 0.80
20 0.64
30 0.51
40 0.41

Between 0 and 10 s: โˆ’(0.80 โˆ’ 1.00)/10 = 0.020 M/s. Between 30 and 40 s: โˆ’(0.41 โˆ’ 0.51)/10 = 0.010 M/s. The average rate falls over time, because there is less reactant left for molecules to collide with.

Python Average rates from a concentration table

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Instantaneous rate

The instantaneous rate is the rate at one moment. On a graph of [A] against time, it is the magnitude of the slope of the tangent line at that time. The initial rate is the instantaneous rate at t = 0, when no products have built up yet. Chemists often measure initial rates, because they are not disturbed by the reverse reaction or by product effects.

flowchart LR
    A["Average rate<br/>slope of a chord"] --> B["Shrink the interval"]
    B --> C["Instantaneous rate<br/>slope of the tangent"]

As the time interval shrinks, the average rate approaches the instantaneous rate.

Python Instantaneous rate as a slope

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Why rates change over time

The rate of most reactions is highest at the start and falls as reactants are used up. The graph of [reactant] against time is a curve that flattens; the graph of [product] against time rises steeply, then levels off. The next lesson shows how to write this dependence as a rate law.

Factors that affect rate

  1. Concentration. More particles per volume means more collisions.
  2. Temperature. Hotter particles collide harder and more often.
  3. Surface area of solids. Powdered zinc reacts faster than a lump, because more atoms are exposed.
  4. Catalyst. A catalyst offers an easier route (lower activation energy).
  5. Nature of the reactants. Some bond changes are inherently easier.

You will explore factors 2 and 4 in Collision Theory and Mechanisms and Catalysts.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. The SI-style unit for reaction rate is

    Rate is a change in concentration (mol/L) per unit time (s), so mol/(Lยทs), written M/s.
  2. 2. For 2 A โ†’ 3 B, if B forms at 0.060 M/s, what is the reaction rate?

    rate = (1/3) ฮ”[B]/ฮ”t = 0.060/3 = 0.020 M/s.
  3. 3. [A] falls from 0.50 M to 0.30 M in 40 s. The average rate of disappearance is

    โˆ’ฮ”[A]/ฮ”t = 0.20 M / 40 s = 0.0050 M/s.
  4. 4. The instantaneous rate at a given time equals

    The instantaneous rate is the derivative of concentration with respect to time at that moment, i.e. the tangent slope.

Summary

  • Rate = change in concentration per unit time, in M/s.
  • Divide by the stoichiometric coefficient so every species gives the same reaction rate.
  • Average rate uses a time interval; instantaneous rate is the slope of the tangent; the initial rate is at t = 0.
  • Rates usually drop as reactants are consumed.
  • Concentration, temperature, surface area and catalysts all affect rate.

Next: Rate Laws and Reaction Order