Skip to content
Tutorials Center
My learning

Topics

Lesson 11 of 39 · Entropy and Free Energy

Entropy Change of Reactions and Phase Changes

Calculate ΔS° for reactions from standard molar entropies and find the entropy of melting and boiling from ΔH/T, with clear worked examples.

Last lesson you predicted the sign of ΔS by counting gas moles. Now you will calculate its value. Because entropy is a state function with an absolute scale, the calculation is a close cousin of the enthalpy one, only simpler: standard molar entropies are all positive for compounds, and no element is set to zero.

ΔS° of a reaction

ΔS°rxn = Σ n S°(products) − Σ m S°(reactants)

The coefficients n and m come from the balanced equation. The units are J/K per mole of reaction (watch the J, not kJ).

Worked example 1: making ammonia

N₂(g) + 3 H₂(g) → 2 NH₃(g)

  • Products: 2 × 192.8 = 385.6 J/K
  • Reactants: 191.6 + 3 × 130.7 = 191.6 + 392.1 = 583.7 J/K
  • ΔS° = 385.6 - 583.7 = -198.1 J/K

Negative, as predicted: four moles of gas become two.

Worked example 2: water formation

2 H₂(g) + O₂(g) → 2 H₂O(l)

  • Products: 2 × 69.9 = 139.8 J/K
  • Reactants: 2 × 130.7 + 205.2 = 466.6 J/K
  • ΔS° = 139.8 - 466.6 = -326.8 J/K

Worked example 3: limestone decomposition

CaCO₃(s) → CaO(s) + CO₂(g)

  • Products: 38.1 + 213.8 = 251.9 J/K
  • Reactant: 92.9 J/K
  • ΔS° = 251.9 - 92.9 = +159.0 J/K

Positive: a gas appears.

Python Entropy change from standard molar entropies

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Entropy changes at phase transitions

At the temperature where two phases coexist (the melting or boiling point), a phase change happens reversibly, with the system and surroundings at the same temperature. Then the entropy change is simply the heat divided by the temperature:

ΔS = ΔH_transition / T

with ΔH in joules per mole and T in kelvins.

  • Fusion (melting) of ice at 273.15 K: ΔH_fus = 6010 J/mol, so ΔS_fus = 6010 / 273.15 = 22.0 J/(mol·K).
  • Vaporization of water at 373.15 K: ΔH_vap = 40,700 J/mol, so ΔS_vap = 40,700 / 373.15 = 109 J/(mol·K).

Vaporization has a much larger entropy change than melting, because turning into a gas gives particles far more freedom than turning into a liquid.

For many liquids that do not form hydrogen bonds, ΔS_vap is close to 85–88 J/(mol·K). This regularity is called Trouton's rule. Water's value is higher because hydrogen bonding makes liquid water unusually ordered.

Python Entropy of fusion and vaporization

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The ethanol and benzene values here are approximate textbook figures. Tables differ slightly in the third digit. The pattern matters: ΔS_vap is several times ΔS_fus.

Entropy of the surroundings

When a system releases heat to its surroundings, that heat disperses into the surroundings, and the surroundings' entropy increases. If the heat transfer happens at constant pressure and temperature T:

ΔS_surr = −ΔH_sys / T

An exothermic reaction (ΔH < 0) increases the entropy of the surroundings, and the effect is bigger at lower temperature, because the same amount of heat disturbs a cold environment more than a hot one. This idea is the key to the next lesson.

Example: the Haber reaction has ΔH° = -92.2 kJ. At 298.15 K, ΔS_surr = +92,200 / 298.15 = +309 J/K. The system's ΔS° is -198.1 J/K, so the total is about +111 J/K: positive overall.

Python Entropy of the system and surroundings

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Common mistakes

  • Mixing kJ and J. ΔH is usually in kJ and ΔS in J/K. Convert before combining.
  • Forgetting coefficients in the sum.
  • Setting S° of elements to zero. Only ΔfH° of elements is zero. S° of an element at 298 K is positive.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. For CaCO₃(s) → CaO(s) + CO₂(g), with S° = 92.9, 38.1 and 213.8 J/(mol·K), ΔS° equals

    Products: 38.1 + 213.8 = 251.9. Reactant: 92.9. ΔS° = 251.9 - 92.9 = +159.0 J/K.
  2. 2. Ice melts at 273.15 K with ΔH_fus = 6010 J/mol. The entropy of fusion is about

    ΔS = ΔH/T = 6010 / 273.15 = 22.0 J/(mol·K), positive because the solid becomes a liquid.
  3. 3. An exothermic reaction at constant temperature and pressure makes the entropy of the surroundings

    ΔS_surr = -ΔH_sys / T. With ΔH_sys negative, ΔS_surr is positive.
  4. 4. Why is ΔS_vap larger than ΔS_fus for the same substance?

    A gas has vastly more positional and energy microstates than a liquid, so the entropy jump is bigger.

Summary

  • ΔS°rxn = ΣnS°(products) − ΣmS°(reactants), in J/K per mole of reaction.
  • At a phase transition, ΔS = ΔH/T; vaporization has a much bigger ΔS than fusion.
  • ΔS_surr = −ΔH_sys/T: an exothermic reaction raises the entropy of the surroundings.
  • Keep J and kJ straight, and use kelvins.

Next: The Second Law and Spontaneity