Skip to content
Tutorials Center
My learning

Topics

Lesson 33 of 39 · Redox and Electrochemistry

Electrolysis and Faraday's Laws

See how electrolysis forces non-spontaneous reactions with electricity, predict products at each electrode, and calculate masses deposited with Faraday's laws.

A galvanic cell uses a spontaneous reaction to make electricity. Electrolysis does the reverse: it uses electrical energy from an external source to drive a reaction that would not happen by itself. It makes aluminum, chlorine, sodium hydroxide and gold-plated jewelry, and it splits water into hydrogen and oxygen.

Electrolytic cell basics

An electrolytic cell has two electrodes in a molten or dissolved electrolyte connected to a power supply.

  • Cathode: reduction happens here. It is connected to the negative terminal of the supply.
  • Anode: oxidation happens here. It is connected to the positive terminal.

Compare this with a galvanic cell. The labels anode = oxidation and cathode = reduction hold in both kinds, but the signs are swapped: in an electrolytic cell the cathode is negative and the anode positive.

During electrolysis, positive ions (cations) move toward the cathode and negative ions (anions) toward the anode.

flowchart LR
  P["Power supply"] -->|"negative terminal"| K["Cathode<br/>reduction"]
  A["Anode<br/>oxidation"] -->|"positive terminal"| P
  K --- E["Electrolyte<br/>ions migrate"] --- A

In an electrolytic cell the power supply pushes electrons onto the cathode.

Molten salts

For molten sodium chloride:

  • Cathode: Na⁺ + e⁻ → Na
  • Anode: 2 Cl⁻ → Cl2 + 2 e⁻

Sodium metal forms at the cathode and chlorine gas at the anode. Only two ions are present, so the products are easy to predict.

Aqueous solutions

Water complicates things, because water can be oxidized or reduced too. Guidelines for choosing products:

  • Cathode: a metal ion that is easy to reduce (below hydrogen's reduction in the series, such as Cu²⁺ or Ag⁺) is deposited as metal. If the cation is very hard to reduce (Na⁺, K⁺, Mg²⁺, Al³⁺), water is reduced instead: 2 H2O + 2 e⁻ → H2 + 2 OH⁻.
  • Anode: with inert electrodes, a halide such as Cl⁻ is usually oxidized in concentrated solution. In other cases water is oxidized: 2 H2O → O2 + 4 H⁺ + 4 e⁻. Active metal anodes dissolve.

Examples:

  • Concentrated brine (NaCl solution): hydrogen at the cathode, chlorine at the anode, and NaOH accumulates in the solution (the chlor-alkali process).
  • Copper(II) sulfate with inert electrodes: copper at the cathode, oxygen at the anode.
  • Copper(II) sulfate with copper electrodes: copper dissolves from the anode and deposits on the cathode, the basis of copper refining and electroplating.

Aluminum is made by electrolysis of aluminum oxide dissolved in molten cryolite (the Hall–Héroult process), because the aluminum ion cannot be reduced from water.

Faraday's laws

Michael Faraday found that the amount of substance changed at an electrode is proportional to the electric charge passed. In modern form:

  1. Charge: Q = I × t (amperes × seconds = coulombs).
  2. Moles of electrons: n(e⁻) = Q / F, with F = 96485 C/mol.
  3. Moles of product: divide by the number of electrons per formula unit z: n = Q / (z F).
  4. Mass: m = n × M.

Example: how much copper is deposited by 2.00 A for 30.0 minutes from Cu²⁺?

  • t = 1800 s, Q = 2.00 × 1800 = 3600 C.
  • n(e⁻) = 3600 / 96485 = 0.03731 mol.
  • Cu²⁺ + 2 e⁻ → Cu, so n(Cu) = 0.01866 mol.
  • m = 0.01866 × 63.55 g/mol = 1.19 g.
Python A Faraday's-law calculator

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The last line uses a molar volume of about 24.8 L/mol, which is an approximation at about 25 °C and 1 bar.

Working backward

How long does it take to plate 5.00 g of silver with a 0.500 A current?

  • n(Ag) = 5.00 / 107.87 = 0.04635 mol.
  • Ag⁺ + e⁻ → Ag, so n(e⁻) = 0.04635 mol and Q = 0.04635 × 96485 = 4472 C.
  • t = Q / I = 4472 / 0.500 = 8944 s ≈ 2.48 hours.
Python How long to plate a given mass?

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Electrolytic versus galvanic cells

Feature Galvanic Electrolytic
Reaction spontaneous forced by external power
Energy chemical to electrical electrical to chemical
Anode sign negative positive
Cathode sign positive negative
Salt bridge usually needed usually not needed

Rechargeable batteries are both: galvanic cells while discharging, electrolytic cells while charging.

In practice the amount deposited is a little less than the ideal calculation because of side reactions. Efficiency ("current efficiency") is the ratio of actual to ideal.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. In an electrolytic cell, which electrode is connected to the negative terminal of the supply?

    The cathode, where reduction happens, receives electrons from the negative terminal.
  2. 2. What is the charge passed by a 3.00 A current for 10.0 minutes?

    Q = I t = 3.00 A × 600 s = 1800 C.
  3. 3. How many moles of electrons are needed to deposit 1 mole of aluminum from Al3+?

    Al3+ + 3 e- → Al, so three moles of electrons per mole of aluminum.
  4. 4. What forms at the cathode when concentrated aqueous NaCl is electrolyzed with inert electrodes?

    Sodium ions are too hard to reduce in water, so water is reduced to hydrogen gas and hydroxide.

Summary

  • Electrolysis uses electrical energy to drive non-spontaneous redox reactions: cathode (−) reduction, anode (+) oxidation.
  • Molten salts give simple products; aqueous solutions can involve water.
  • Q = It, n(e⁻) = Q/F, n = Q/(zF) and m = nM, with F = 96485 C/mol.
  • Applications include electroplating, refining copper, chlorine/NaOH production and aluminum smelting.
  • Real yields are a little lower than ideal because of side reactions.

Next: Solubility Product, Ksp