Skip to content
Tutorials Center
My learning

Topics

Lesson 19 of 39 · Reaction Rates

The Arrhenius Equation

Use the Arrhenius equation k = A e^(−Ea/RT) and its two-point form to see how temperature affects rate constants and to find activation energy from data.

The rate constant k is not really constant: it changes with temperature, often dramatically. In 1889 Svante Arrhenius proposed an equation that captures this behavior and links it to the activation energy. It is one of the most used equations in chemical kinetics.

The equation

k = A × e^(−Eₐ / (R T))

  • k: rate constant.
  • A: the pre-exponential factor (frequency factor). It has the same units as k and reflects how often collisions occur with a suitable orientation.
  • Eₐ: activation energy in J/mol (convert from kJ/mol).
  • R: 8.314 J/(mol·K).
  • T: temperature in kelvins.

The exponential term is the fraction of molecules with enough energy, as in the previous lesson. A bigger Eₐ or a lower T makes k smaller; a bigger A makes k bigger.

The straight-line form

Take natural logs of both sides:

ln k = ln A − (Eₐ / R) × (1/T)

This is a straight line y = b + m x with y = ln k, x = 1/T, slope m = −Eₐ/R and intercept ln A. Measure k at several temperatures, plot ln k against 1/T, and the slope gives the activation energy.

The two-point form

If you know k at two temperatures, A cancels:

ln(k₂ / k₁) = (Eₐ / R) × (1/T₁ − 1/T₂)

Use it to find Eₐ from two measurements, or to predict k at a new temperature.

Worked example 1: effect of a 10 K rise

A reaction has Eₐ = 75 kJ/mol. How much faster is it at 308.15 K than at 298.15 K?

1/T₁ − 1/T₂ = 1/298.15 − 1/308.15 = 0.0033540 − 0.0032452 = 1.088 × 10⁻⁴ K⁻¹

ln(k₂/k₁) = (75,000 / 8.314) × 1.088 × 10⁻⁴ = 9021 × 1.088×10⁻⁴ = 0.981

k₂/k₁ = e^0.981 ≈ 2.7

The rate constant is about 2.7 times larger: the familiar "doubling or more per 10 °C" rule of thumb.

Worked example 2: finding Eₐ

At 300 K, k = 1.0 × 10⁻³ s⁻¹; at 320 K, k = 1.0 × 10⁻² s⁻¹. The ratio is 10, so ln 10 = 2.303.

1/300 − 1/320 = 0.0033333 − 0.0031250 = 2.083 × 10⁻⁴

Eₐ = R × ln(k₂/k₁) / (1/T₁ − 1/T₂) = 8.314 × 2.303 / 2.083×10⁻⁴ = 91,900 J/mol ≈ 92 kJ/mol

Python Two-point Arrhenius calculator

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Finding Eₐ and A from a graph

Suppose you measured k at five temperatures. A linear fit of ln k against 1/T gives Eₐ and A. The data below are simulated from the Arrhenius equation (with Eₐ = 60 kJ/mol and A = 1.0 × 10¹⁰ s⁻¹) to show that the method recovers the true values. They are not measurements.

Python Arrhenius plot: recover Ea and A

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

What A and Eₐ tell you

  • Large Eₐ: the reaction is very temperature sensitive and usually slow at room temperature.
  • Small Eₐ: the reaction is only mildly temperature dependent. Radical recombinations and some reactions between ions can have Eₐ near zero.
  • A is at most about 10¹¹–10¹⁴ s⁻¹ (or M⁻¹ s⁻¹) for many gas-phase reactions, and is smaller if only a few orientations work.

Use kelvins for T and joules for Eₐ with R = 8.314 J/(mol·K). A common error is leaving Eₐ in kJ/mol while R is in J/(mol·K), which gives an answer wrong by a factor of 1000 in the exponent.

The limits of the equation

Arrhenius behavior is an excellent approximation over moderate temperature ranges, but not perfect. At very wide ranges, the plot of ln k against 1/T curves slightly, because A depends weakly on temperature. Enzyme reactions also deviate: above the optimum temperature the enzyme itself breaks down (denatures), so the rate falls even though the equation predicts a rise. Cooling food slows spoilage for the same Arrhenius reason: lowering T from 25 °C to 5 °C reduces the rate constant of the chemical reactions involved by a large factor.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. In ln k = ln A − (Eₐ/R)(1/T), what does the slope of a plot of ln k against 1/T equal?

    The line has slope −Eₐ/R and intercept ln A, so Eₐ = −slope × R.
  2. 2. Which change makes k larger?

    k = A e^(−Eₐ/RT): lowering Eₐ makes the exponent less negative, so k rises.
  3. 3. A plot of ln k against 1/T has slope −7200 K. What is Eₐ? (R = 8.314 J/(mol·K))

    Eₐ = −slope × R = 7200 × 8.314 = 59,860 J/mol ≈ 59.9 kJ/mol.
  4. 4. Eₐ in the Arrhenius equation should be expressed with R = 8.314 J/(mol·K) in

    R carries joules, so Eₐ must be in J/mol (multiply kJ/mol by 1000) for the units to cancel.

Summary

  • k = A e^(−Eₐ/RT); k increases with T and decreases with Eₐ.
  • ln k = ln A − (Eₐ/R)(1/T): an Arrhenius plot has slope −Eₐ/R.
  • Two-point form: ln(k₂/k₁) = (Eₐ/R)(1/T₁ − 1/T₂).
  • A 10 K rise multiplies k by roughly 2–3 for typical Eₐ values (50–80 kJ/mol).
  • Keep Eₐ in J/mol and T in kelvins.

Next: Reaction Mechanisms and Catalysts