Skip to content
Tutorials Center
My learning

Topics

Lesson 7 of 39 · Enthalpy and Thermochemistry

Thermochemical Equations

Write balanced equations with ΔH, scale and reverse them correctly, include physical states, and calculate the heat released from a given mass of reactant.

A thermochemical equation is a balanced chemical equation that also shows the enthalpy change. It tells you both what happens and how much heat goes with it. Writing and manipulating these equations is a core skill, and it prepares the way for Hess's law.

Reading a thermochemical equation

Here is the combustion of methane, the main part of natural gas:

CH₄(g) + 2 O₂(g) → CO₂(g) + 2 H₂O(l) ΔH° = -890.3 kJ

This means: when 1 mol of methane gas reacts with 2 mol of oxygen gas to give 1 mol of carbon dioxide gas and 2 mol of liquid water, 890.3 kJ of heat is released (at standard conditions). The numbers in the equation are moles, and ΔH is the enthalpy change for the reaction exactly as written. The unit "kJ" here is sometimes written "kJ/mol of reaction" or "kJ per mole of reaction".

Three rules keep the signs and sizes right.

Rule 1: show physical states

The enthalpy change depends on the states of the substances: (s), (l), (g), (aq). Forming liquid water from hydrogen and oxygen releases more heat than forming water vapor, because condensing the vapor releases the heat of vaporization:

Equation ΔH° (kJ)
H₂(g) + ½ O₂(g) → H₂O(l) -285.8
H₂(g) + ½ O₂(g) → H₂O(g) -241.8

Fractional coefficients are fine in thermochemistry, because the coefficients count moles, not molecules.

Rule 2: multiplying an equation multiplies ΔH

Enthalpy is extensive. If you double the amounts, the heat doubles:

2 H₂(g) + O₂(g) → 2 H₂O(l) ΔH° = 2 × (-285.8) = -571.6 kJ

Rule 3: reversing an equation flips the sign of ΔH

If forming a substance releases heat, decomposing it absorbs the same amount:

H₂O(l) → H₂(g) + ½ O₂(g) ΔH° = +285.8 kJ

flowchart LR
    A["Reactants"] -->|"ΔH = -X"| B["Products"]
    B -->|"ΔH = +X"| A

Forward and reverse reactions have equal and opposite enthalpy changes.

Python Scale and reverse thermochemical equations

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Using ΔH as a conversion factor

The equation's ΔH works like a mole ratio. For methane, "1 mol CH₄ ↔ -890.3 kJ". So you can find the heat for any amount of reactant using stoichiometry.

Worked example

How much heat is released when 8.00 g of methane burns completely? (M = 16.04 g/mol)

  1. Moles: 8.00 g ÷ 16.04 g/mol = 0.4988 mol.
  2. Heat: 0.4988 mol × (-890.3 kJ/mol) = -444 kJ.

About 444 kJ of heat is released.

Worked example: finding the mass for a given heat

How many grams of methane must burn to release 1000 kJ?

1000 kJ ÷ 890.3 kJ/mol = 1.123 mol, and 1.123 mol × 16.04 g/mol = 18.0 g.

Python Heat from a given amount of fuel

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Limiting reactants

If you are given amounts of several reactants, the limiting reactant controls the heat released. Find the moles of reaction each reactant allows (moles divided by its coefficient), take the smaller one, and multiply by ΔH.

Example: 0.50 mol CH₄ and 0.80 mol O₂ react. CH₄ allows 0.50 moles of reaction; O₂ allows 0.80 / 2 = 0.40. Oxygen is limiting. Heat released: 0.40 × 890.3 = 356 kJ.

Putting ΔH inside the equation

You may see ΔH written as a product or reactant: CH₄ + 2 O₂ → CO₂ + 2 H₂O + 890 kJ. This says the same thing as ΔH = -890 kJ. In this course we always write ΔH separately with its sign, because the sign convention is then unambiguous.

When you see ΔH next to an equation, ask three questions: Which way is the equation written? What are the coefficients? What states are shown? Changing any of them changes the ΔH.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. The reaction A → B has ΔH = -40 kJ. What is ΔH for B → A?

    Reversing a reaction flips the sign of ΔH while keeping its size.
  2. 2. H₂(g) + ½ O₂(g) → H₂O(l) has ΔH = -285.8 kJ. What is ΔH for 4 H₂(g) + 2 O₂(g) → 4 H₂O(l)?

    The equation was multiplied by 4, so ΔH is multiplied by 4: 4 × (-285.8) = -1143.2 kJ.
  3. 3. Why does forming H₂O(l) release more heat than forming H₂O(g)?

    The liquid is lower in enthalpy than the vapor by the heat of vaporization (about 44 kJ/mol), so forming the liquid releases extra heat.
  4. 4. How much heat is released when 0.250 mol of CH₄ burns (ΔH = -890.3 kJ per mol of CH₄)?

    0.250 mol × 890.3 kJ/mol = 222.6 kJ released.

Summary

  • A thermochemical equation gives the balanced reaction and its ΔH for the amounts written.
  • Show physical states; ΔH depends on them.
  • Multiply the equation by n and ΔH becomes n × ΔH.
  • Reverse the equation and ΔH changes sign.
  • Use ΔH like a mole ratio to find heat from a mass of reactant; the limiting reactant sets the heat.

Next: Hess's Law