Skip to content
Tutorials Center
My learning

Topics

Lesson 5 of 39 · Enthalpy and Thermochemistry

Enthalpy and Heat at Constant Pressure

Define enthalpy, see why ΔH equals the heat at constant pressure, relate ΔH to ΔU for gas reactions, and read energy diagrams with worked examples.

Most chemical reactions happen in open flasks, at the constant pressure of the atmosphere. In such a reaction, gases may be produced or consumed, so the system does a little expansion or compression work on the air around it. Instead of tracking that work every time, chemists invented a quantity that bundles it in: enthalpy.

Defining enthalpy

Enthalpy (symbol H) is defined as

H = U + PV

where U is internal energy, P is pressure and V is volume. Like U, we cannot measure H absolutely, but we can measure its change:

ΔH = ΔU + Δ(PV)

At constant pressure, Δ(PV) = PΔV, so ΔH = ΔU + PΔV.

Now use the first law, ΔU = q + w, with pressure-volume work w = -PΔV:

ΔH = (q - PΔV) + PΔV = q_p

The subscript p means "at constant pressure". So:

At constant pressure, the enthalpy change equals the heat exchanged with the surroundings. That is why ΔH is so useful: a simple calorimeter open to the air measures it directly.

  • ΔH < 0: heat released, exothermic.
  • ΔH > 0: heat absorbed, endothermic.

Enthalpy is a state function

A state function depends only on the current state of the system (its composition, temperature, pressure), not on how it got there. Altitude is a good analogy: the height difference between a valley and a summit does not depend on the path you walk.

U, H, S and G are state functions. Heat q and work w are not: they depend on the path. This is why ΔH can be tabulated for a reaction, and why Hess's law works.

Enthalpy is also an extensive property: doubling the amount of material doubles H and ΔH.

ΔH versus ΔU for reactions with gases

For reactions involving only solids and liquids, volume changes are tiny, so ΔH ≈ ΔU. For reactions that change the number of moles of gas, the PV term matters. If the gases behave ideally, PV = nRT, so at constant temperature:

ΔH = ΔU + Δn_gas × R × T

where Δn_gas is moles of gaseous products minus moles of gaseous reactants (from the balanced equation), and R = 8.314 J/(mol·K).

Worked example

For the Haber process, N₂(g) + 3 H₂(g) → 2 NH₃(g), we have Δn_gas = 2 - (1 + 3) = -2. At 298.15 K:

Δn R T = -2 × 8.314 × 298.15 = -4957.6 J ≈ -4.96 kJ

So ΔH = ΔU - 4.96 kJ per mole of reaction as written: the enthalpy change is slightly more negative than the internal energy change, because the contraction lets the surroundings do work on the system.

Python From ΔU to ΔH for gas reactions

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Energy diagrams

An enthalpy diagram plots the enthalpy of reactants and products. For an exothermic reaction, the products sit lower than the reactants and ΔH is negative. For an endothermic one, the products sit higher.

Python Draw exothermic and endothermic diagrams

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Standard conditions

To compare reactions fairly, we quote enthalpy changes at standard conditions. In this course:

  • pressure of 1 bar (10⁵ Pa; older sources use 1 atm = 101.325 kPa),
  • each substance in its standard state (its most stable form at that pressure),
  • solutions at 1 mol/L concentration,
  • usually a temperature of 298.15 K (25 °C), though temperature is not part of the definition.

The superscript ° marks a standard value: ΔH°. The difference between 1 bar and 1 atm is small enough to ignore for most work here.

ΔH values assume the reaction goes to completion exactly as written, with the amounts in the balanced equation. If the equation is written for 2 mol of a reactant, the ΔH refers to 2 mol, not 1. You will practice this in Thermochemical Equations.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. At constant pressure, the enthalpy change ΔH equals

    Combining the first law with w = -PΔV gives ΔH = q_p, the heat at constant pressure.
  2. 2. Which of these is NOT a state function?

    Heat depends on the path taken between two states, so it is not a state function. H, U and V depend only on the state.
  3. 3. For 2 SO₂(g) + O₂(g) → 2 SO₃(g), what is Δn_gas?

    Gaseous products: 2 mol. Gaseous reactants: 2 + 1 = 3 mol. Δn_gas = 2 - 3 = -1.
  4. 4. A reaction has ΔH = -50 kJ. This reaction is

    A negative ΔH means heat is released to the surroundings: the reaction is exothermic.

Summary

  • Enthalpy H = U + PV; at constant pressure ΔH = q_p.
  • ΔH < 0 is exothermic, ΔH > 0 is endothermic.
  • H is a state function and an extensive property.
  • ΔH = ΔU + Δn_gas × R × T for ideal gas reactions; ΔH ≈ ΔU when no gas is involved.
  • Standard enthalpy changes (ΔH°) use standard states, commonly quoted at 298.15 K.

Next: Specific Heat and Calorimetry