Skip to content
Tutorials Center
My learning

Topics

Lesson 18 of 39 · Reaction Rates

Collision Theory and Activation Energy

Learn why reactions need energetic, well-oriented collisions, what activation energy is, and how temperature changes the fraction of molecules that can react.

Why do hot things react faster? Why does a match need a strike to start burning even though burning releases lots of energy? Collision theory answers both questions with a simple picture: molecules react when they collide, but only some collisions are successful.

The three requirements

For two molecules to react, a collision must:

  1. Happen. The molecules must meet. More concentration means more collisions per second.
  2. Be energetic enough. The colliding molecules must have at least a minimum energy, the activation energy (Eₐ), to start breaking bonds.
  3. Have the right orientation. The atoms that will bond must actually touch. Two molecules colliding with the wrong sides facing each other just bounce apart.

Only a tiny fraction of collisions meet all three conditions. In a gas at room temperature, a molecule collides billions of times per second, but a typical reaction has only a very small fraction of collisions that succeed.

Activation energy

The activation energy is the energy barrier between reactants and products. Think of rolling a boulder over a hill into the next valley: even if the valley is lower (exothermic), you must first push the boulder up to the top.

At the top of the barrier, the particles form an unstable arrangement called the transition state (or activated complex). It exists only for an instant.

flowchart LR
    R["Reactants"] -->|"climb the barrier: Ea"| T["Transition state<br/>(highest energy)"]
    T -->|"energy released"| P["Products"]

Reaction progress: the barrier Ea sits between reactants and products.

An energy profile shows this. The forward activation energy Ea(fwd) is measured from the reactants to the peak. The reverse activation energy is measured from the products to the peak, and the difference is the enthalpy change:

ΔH = Ea(fwd) − Ea(rev)

Python Draw an energy profile

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Molecular energies: the Maxwell–Boltzmann distribution

Molecules in a sample do not all have the same energy. At a given temperature there is a spread, called the Maxwell–Boltzmann distribution. Most molecules have moderate energies; a few are very slow and a few are very fast.

Only the molecules in the high-energy tail (with energy at least Eₐ) can react on collision. Raising the temperature shifts the whole distribution to higher energies and flattens it, so a much larger fraction of molecules lies beyond Eₐ.

The fraction of collisions with energy at least Eₐ is approximately

fraction ≈ e^(−Eₐ / (R T))

with Eₐ in J/mol, R = 8.314 J/(mol·K) and T in kelvins.

Worked example

For Eₐ = 50 kJ/mol:

  • At 298 K: Eₐ/RT = 50,000 / (8.314 × 298.15) = 20.17, fraction ≈ e^(−20.17) ≈ 1.7 × 10⁻⁹.
  • At 308 K (10 K higher): Eₐ/RT = 19.52, fraction ≈ 3.3 × 10⁻⁹.

A 10 K rise roughly doubles the fraction of energetic molecules, which is why a rise of 10 °C often roughly doubles the rate of a reaction with a moderate activation energy.

Python Fraction of molecules above the barrier

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Notice that the larger the barrier, the more sensitive the rate is to temperature.

Python Maxwell–Boltzmann speed distribution

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The plot shows speeds, not energies, but the message is the same: heating spreads the distribution and pushes more molecules into the fast tail.

Putting it together

The rate constant depends on both factors:

  • how often collisions happen,
  • the fraction that are energetic enough,
  • and the fraction with proper orientation.

The Arrhenius equation combines them into one formula.

Concentration changes the number of collisions per second, so it changes the rate. It does not change k. Temperature changes the fraction of energetic collisions, which does change k.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. Which is NOT required for a successful collision?

    Exothermic reactions also need activation energy. Endothermic or exothermic is irrelevant to whether a collision is successful.
  2. 2. The activation energy is

    Ea is the energy barrier that colliding molecules must overcome.
  3. 3. Raising the temperature increases the rate mainly because

    A larger fraction of the Maxwell–Boltzmann distribution lies above Ea (collisions also become more frequent, but that is a smaller effect).
  4. 4. A reaction has Ea(forward) = 80 kJ/mol and ΔH = −30 kJ/mol. Ea(reverse) is

    ΔH = Ea(fwd) − Ea(rev), so Ea(rev) = Ea(fwd) − ΔH = 80 − (−30) = 110 kJ/mol.

Summary

  • Reactions need collisions that are frequent, energetic (≥ Eₐ) and correctly oriented.
  • Activation energy is the barrier; the peak is the transition state.
  • ΔH = Ea(fwd) − Ea(rev).
  • The fraction of molecules with energy ≥ Eₐ is about e^(−Eₐ/RT) and grows quickly with temperature.
  • Concentration changes how often collisions occur; temperature changes how many are energetic.

Next: The Arrhenius Equation