Skip to content
Tutorials Center
My learning

Topics

Lesson 9 of 39 · Enthalpy and Thermochemistry

Standard Enthalpy of Formation

Learn standard enthalpy of formation and use ΔH°rxn = ΣnΔfH°(products) − ΣnΔfH°(reactants) to calculate reaction enthalpies from tabulated data.

Hess's law lets you combine reactions, but hunting for the right set of equations takes time. Chemists solved this by tabulating one standard type of reaction for thousands of compounds: the formation of the compound from its elements. With such a table, you can find ΔH° for almost any reaction in a single calculation.

Definition

The standard enthalpy of formation ΔfH° of a compound is the enthalpy change when 1 mole of the compound forms from its elements in their standard states at standard conditions.

Examples (formation equations):

  • C(graphite) + O₂(g) → CO₂(g), ΔfH° = -393.5 kJ/mol
  • H₂(g) + ½ O₂(g) → H₂O(l), ΔfH° = -285.8 kJ/mol
  • ½ N₂(g) + ½ O₂(g) → NO(g), ΔfH° = +90.3 kJ/mol

Notice the fractional coefficients: the equation must produce exactly 1 mol of the compound.

The standard state of an element is its most stable form at 1 bar and the stated temperature: graphite for carbon, H₂(g), O₂(g), N₂(g), Br₂(l), Hg(l), Na(s) and so on. By definition,

ΔfH° of an element in its standard state = 0

because forming it from itself involves no change.

Common values

These values are rounded, in kJ/mol at 298 K. Different sources vary by a few tenths because of rounding or updates.

Substance ΔfH° (kJ/mol)
CO₂(g) -393.5
CO(g) -110.5
H₂O(l) -285.8
H₂O(g) -241.8
CH₄(g) -74.8
C₂H₅OH(l), ethanol -277.7
NH₃(g) -46.1
NO(g) +90.3
NO₂(g) +33.2
CaCO₃(s) -1206.9
CaO(s) -635.1

A negative value means the compound is lower in enthalpy than its elements, so forming it releases heat. A positive value (as in NO) means forming it absorbs heat.

The master equation

For any reaction aA + bB → cC + dD:

ΔH°rxn = Σ n ΔfH°(products) − Σ m ΔfH°(reactants)

where n and m are the coefficients from the balanced equation. Why does it work? It is Hess's law: imagine decomposing the reactants into elements (reverse of formation) and then forming the products from those elements.

flowchart TD
    R["Reactants"] -->|"ΔH°rxn"| P["Products"]
    R -->|"-ΣΔfH° (reactants)"| E["Elements in standard states"]
    E -->|"+ΣΔfH° (products)"| P

Route via elements: take reactants apart, then build the products.

Worked example 1: burning ethanol

C₂H₅OH(l) + 3 O₂(g) → 2 CO₂(g) + 3 H₂O(l)

  • Products: 2 × (-393.5) + 3 × (-285.8) = -787.0 - 857.4 = -1644.4 kJ
  • Reactants: -277.7 + 3 × 0 = -277.7 kJ (O₂ is an element, so zero)
  • ΔH°rxn = -1644.4 - (-277.7) = -1366.7 kJ

Worked example 2: heating limestone

CaCO₃(s) → CaO(s) + CO₂(g)

ΔH° = (-635.1 + -393.5) - (-1206.9) = -1028.6 + 1206.9 = +178.3 kJ

Strongly endothermic: that is why lime kilns need so much fuel.

Python Reaction enthalpy from formation data

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Going backwards: finding an unknown ΔfH°

If you know the reaction enthalpy (for example from a bomb calorimeter) and every ΔfH° except one, rearrange the master equation.

Example: the combustion of ethanol releases 1366.7 kJ per mole. Given CO₂ and H₂O values, find ΔfH° of ethanol:

-1366.7 = [2(-393.5) + 3(-285.8)] - [ΔfH°(ethanol) + 0]

ΔfH°(ethanol) = -1644.4 + 1366.7 = -277.7 kJ/mol

Python Solve for an unknown enthalpy of formation

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Do not forget the coefficients. ΔfH° is per mole, so for 2 CO₂ you multiply by 2. Also do not forget that elements have ΔfH° = 0 only in their standard state: H₂O(g) is not zero, and O₃ (ozone) is not zero either.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. What is ΔfH° of O₂(g) at 298 K?

    An element in its standard state has ΔfH° = 0 by definition.
  2. 2. In the master equation ΔH°rxn = ΣnΔfH°(products) − ΣmΔfH°(reactants), the coefficients n and m come from

    Each ΔfH° is per mole, so you multiply by the number of moles of that substance in the balanced equation.
  3. 3. For CaCO₃(s) → CaO(s) + CO₂(g), the formation values are -1206.9, -635.1 and -393.5 kJ/mol. ΔH° is

    Products: -635.1 - 393.5 = -1028.6. Reactant: -1206.9. ΔH° = -1028.6 + 1206.9 = +178.3 kJ.
  4. 4. A compound has a positive ΔfH°. Compared with its elements, the compound is

    Formation absorbs heat, so the compound sits above its elements on the enthalpy scale. That alone does not decide stability, which also depends on entropy.

Summary

  • ΔfH° is the enthalpy change for forming 1 mol of a compound from its elements in standard states.
  • Elements in their standard states have ΔfH° = 0.
  • ΔH°rxn = ΣnΔfH°(products) − ΣmΔfH°(reactants), using balanced-equation coefficients.
  • The master equation is Hess's law via the elements.
  • Rearrange it to find an unknown ΔfH° from a measured reaction enthalpy.

Next: Entropy and Disorder