Skip to content
Tutorials Center
My learning

Topics

Lesson 21 of 39 ยท Chemical Equilibrium

Dynamic Equilibrium: Reactions That Run Both Ways

Learn what chemical equilibrium really is: forward and reverse rates that match, constant concentrations, and a simulation that shows a mixture settling down.

Many reactions do not run until one reactant is gone. A mixture of nitrogen dioxide and dinitrogen tetroxide, for example, keeps both gases in the flask forever. The reaction has not stopped. It is running in both directions at the same time, and the two directions have found a balance.

This lesson explains that balance, called dynamic equilibrium, and shows how to recognize it. The ideas here are the foundation for everything else in this chapter: the equilibrium constant, the reaction quotient, ICE tables and Le Chatelier's principle.

Reversible reactions

A reversible reaction can proceed from reactants to products (the forward reaction) and from products back to reactants (the reverse reaction). We write it with a double arrow:

N2O4(g) โ‡Œ 2 NO2(g)

Nโ‚‚Oโ‚„ is a colorless gas. NOโ‚‚ is a brown gas. If you seal pure Nโ‚‚Oโ‚„ in a flask, brown gas slowly appears. After a while the color stops changing, even though plenty of Nโ‚‚Oโ‚„ is left.

Many reactions are reversible in principle. We call a reaction "irreversible" only when the reverse reaction is so unfavorable that, for practical purposes, it never matters. Burning a log is a good example.

What "dynamic" means

At the start, only Nโ‚‚Oโ‚„ is present, so the forward rate is high and the reverse rate is zero. As NOโ‚‚ builds up, the reverse reaction speeds up, because it needs NOโ‚‚ molecules to collide. Meanwhile the forward rate drops because Nโ‚‚Oโ‚„ is being used up.

Eventually the two rates become equal. From then on, every second the same number of Nโ‚‚Oโ‚„ molecules break apart as NOโ‚‚ molecules join up. Nothing changes on the large scale, but molecules are still reacting.

Start: only reactant

Forward rate high Plenty of reactant
Reverse rate zero No product yet
1 / 3

The key conditions for equilibrium are:

  1. The system is closed. Nothing enters or leaves (matter may not cross the boundary, though heat can).
  2. The forward rate equals the reverse rate.
  3. The macroscopic properties (concentration, pressure, color) stay constant.

Equilibrium does not mean the concentrations of reactants and products are equal. It means the rates are equal. A mixture can be 99 percent product or 99 percent reactant and still be at equilibrium.

A rate-law simulation

We can model the approach to equilibrium with two rate laws. Suppose the forward reaction is first order in Nโ‚‚Oโ‚„ and the reverse is second order in NOโ‚‚ (this is a simplified model, chosen for illustration; real mechanisms are more detailed):

  • forward rate = kf ร— [N2O4]
  • reverse rate = kr ร— [NO2]ยฒ

The program below steps forward in tiny time intervals and updates the concentrations. The rate constants are made-up values for the model, not measured data.

Python Simulating the approach to equilibrium

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Watch the last two columns. The forward rate starts high and falls. The reverse rate starts at zero and rises. They meet, and the concentrations stop changing. The final line shows an important fact: the ratio [B]ยฒ / [A] ends up equal to kf / kr. That ratio is the equilibrium constant, which you will meet in the next lesson.

Equilibrium can be reached from either side

Equilibrium does not remember how it started. Begin with pure reactant, pure product, or any mixture, at the same temperature, and the system settles to the same ratio. Try it:

Python Starting from the product side

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Different starting mixtures give different final amounts, because the total number of atoms is different. But in every case [B]ยฒ / [A] ends at the same value. That fixed ratio is what makes equilibrium so useful for prediction.

Evidence that it is dynamic

How do we know the reaction has not simply stopped? One classic argument uses isotopes. If you add a little radioactively labeled product to a system already at equilibrium, the label soon appears in the reactant side too. That could only happen if molecules keep converting both ways. Another sign is that the system responds when you disturb it, which you will study in Le Chatelier's principle.

Physical equilibria

Equilibrium is not only for chemical reactions. A sealed bottle of water has liquid and vapor at equilibrium: molecules leave the surface and return at the same rate. A saturated salt solution with undissolved crystals is another, where dissolving and crystallizing balance. These cases use the same logic.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. What is true about the rates at dynamic equilibrium?

    Both reactions keep happening, and they happen at the same rate, so concentrations stop changing.
  2. 2. A mixture at equilibrium contains 95 percent product. Which statement is correct?

    Equilibrium is about equal rates. The position of equilibrium can lie far to either side.
  3. 3. Why must the system be closed for equilibrium to be reached?

    If product or reactant leaves, the balance keeps being disturbed and the reaction keeps drifting in one direction.
  4. 4. In the simulation, what happens to the reverse rate as the reaction proceeds from pure reactant?

    The reverse rate depends on the concentration of product, which grows from zero.

Summary

  • A reversible reaction (โ‡Œ) runs in both directions.
  • At dynamic equilibrium, forward and reverse rates are equal and macroscopic properties are constant.
  • Equilibrium needs a closed system and does not mean equal amounts of reactants and products.
  • The same equilibrium ratio is reached from either side at a given temperature.
  • Physical changes such as evaporation in a sealed container also reach equilibrium.

Next: The Equilibrium Constant Expression