Skip to content
Tutorials Center
My learning

Topics

Lesson 20 of 39 ยท Reaction Rates

Reaction Mechanisms and Catalysts

Learn elementary steps, intermediates and the rate-determining step, see how a mechanism predicts a rate law, and how catalysts speed reactions by lowering Ea.

A balanced equation shows what goes in and what comes out. It does not show how the change happens. Most reactions occur through a sequence of simple steps, called the reaction mechanism. Knowing the mechanism explains the rate law, and it also shows how a catalyst can speed things up.

Elementary steps and molecularity

An elementary step is a single molecular event: one collision or one decomposition. The number of particles taking part is its molecularity:

  • Unimolecular: one particle, e.g. A โ†’ products.
  • Bimolecular: two particles collide, e.g. A + B โ†’ products.
  • Termolecular: three particles meet at once, which is rare.

For an elementary step only, the rate law can be written straight from the equation:

Elementary step Rate law
A โ†’ products rate = k[A]
A + B โ†’ products rate = k[A][B]
2 A โ†’ products rate = k[A]ยฒ

This is not true for an overall reaction made of several steps.

Intermediates

An intermediate is formed in one step and used up in a later step. It does not appear in the overall equation. A mechanism must add up to the overall equation, with intermediates cancelling.

The rate-determining step

In a multistep mechanism, one step is much slower than the others: the rate-determining step (the bottleneck). The overall rate cannot exceed the speed of this step. Think of a traffic jam: the slowest narrow road sets the flow of cars no matter how wide the other roads are.

Worked example

Overall reaction: NOโ‚‚(g) + CO(g) โ†’ NO(g) + COโ‚‚(g) (at moderate temperatures).

Proposed mechanism:

  1. NOโ‚‚ + NOโ‚‚ โ†’ NOโ‚ƒ + NO (slow)
  2. NOโ‚ƒ + CO โ†’ NOโ‚‚ + COโ‚‚ (fast)

Add the steps: NOโ‚‚ + NOโ‚‚ + NOโ‚ƒ + CO โ†’ NOโ‚ƒ + NO + NOโ‚‚ + COโ‚‚. Cancel NOโ‚ƒ (an intermediate) and one NOโ‚‚: NOโ‚‚ + CO โ†’ NO + COโ‚‚. โœ“.

The slow step is bimolecular in NOโ‚‚, so rate = k[NOโ‚‚]ยฒ. The rate does not depend on [CO], which is consistent with experiments at moderate temperatures.

flowchart LR
    A["2 NOโ‚‚"] -->|"slow: rate-determining"| B["NOโ‚ƒ + NO<br/>(NOโ‚ƒ is an intermediate)"]
    B -->|"fast, + CO"| C["NOโ‚‚ + COโ‚‚ + NO"]

A two-step mechanism: the slow first step sets the rate law.

A mechanism can never be proved by a rate law alone. Experiments can rule a mechanism out (if it predicts the wrong rate law) or support it (if it matches and if intermediates are detected), but other mechanisms might fit too.

Simulating consecutive steps

For a mechanism A โ†’ I โ†’ P where the first step is slower, the intermediate I stays at a low, steady level and the product forms at roughly the rate of the slow step. The simulation below solves the rate equations numerically. It is a model with chosen rate constants, not a measurement.

Python A two-step reaction: slow then fast

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Catalysts

A catalyst speeds up a reaction without being consumed. It works by giving the reaction a different pathway with a lower activation energy. The catalyst takes part in the mechanism (often as a reactant in one step and a product in a later step), so it is regenerated.

Important points:

  • A catalyst lowers Eโ‚ for both the forward and reverse reactions, so it speeds both equally.
  • It does not change ฮ”H, ฮ”G or the equilibrium constant K. It helps the system reach equilibrium sooner, but not shift it.
  • A catalyst is not used up, though it can slowly become poisoned or degraded.

Examples:

  • Manganese dioxide speeds the decomposition of hydrogen peroxide into water and oxygen.
  • Iron in the Haber process for ammonia.
  • Platinum, palladium and rhodium in a car's catalytic converter, which converts CO, unburned fuel and NOx into COโ‚‚, Hโ‚‚O and Nโ‚‚.
  • Enzymes: biological catalysts, typically proteins, that make life's reactions fast at body temperature.

A catalyst can be in the same phase as the reactants (homogeneous, for example acid in solution) or in a different phase (heterogeneous, for example a solid metal surface with gas reactants).

How much does a lower Eโ‚ help?

Using the Arrhenius equation at constant T, the rate constant ratio is

k_cat / k_uncat = e^(ฮ”Eโ‚ / (RT))

where ฮ”Eโ‚ is the decrease in activation energy (A is assumed to be the same). A drop of 20 kJ/mol at 298.15 K gives e^(20,000/(8.314 ร— 298.15)) = e^8.07 โ‰ˆ 3200. Even a modest decrease of Eโ‚ gives a huge speed-up.

Python The speed-up from a lower activation energy

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Python Energy profiles with and without a catalyst

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. In a multistep mechanism, the rate law of the overall reaction is determined by

    The slowest step is the bottleneck, so its rate law (with any fast pre-steps accounted for) matches the overall rate.
  2. 2. An intermediate is a species that

    Intermediates are produced and used up inside the mechanism, so they cancel from the overall equation. A species recovered at the end is a catalyst.
  3. 3. A catalyst changes which of the following?

    A catalyst provides a pathway with a lower Eโ‚. ฮ”H, ฮ”Gยฐ and K are unchanged.
  4. 4. An elementary step is A + B โ†’ C. Its rate law is

    For an elementary step, the orders equal the coefficients of the reactants in that step.

Summary

  • A mechanism is a sequence of elementary steps that add up to the overall equation.
  • For an elementary step, the rate law follows from its coefficients; for an overall reaction it does not.
  • Intermediates are made and used up; the slowest step (rate-determining) controls the rate.
  • Catalysts lower Eโ‚ through an alternative pathway, speed up forward and reverse reactions equally and leave ฮ”H, ฮ”Gยฐ and K unchanged.
  • Even a small drop in Eโ‚ gives a large speed-up (about 3000-fold for 20 kJ/mol at 298 K).

That completes the first four chapters. Return to the track overview.