Skip to content
Tutorials Center
My learning

Topics

Lesson 35 of 39 · Solubility and Buffers

The Common-Ion Effect, Precipitation and pH

Predict whether a precipitate forms by comparing Q with Ksp, calculate solubility with a common ion, and see how pH affects solubility.

Ksp tells you the solubility of a salt in pure water. But real solutions contain other ions. This lesson shows how a shared ion lowers solubility, how to predict precipitation when you mix solutions, and why acidity matters.

The common-ion effect

Adding a soluble compound that shares an ion with a sparingly soluble salt decreases the salt's solubility. This is Le Chatelier's principle applied to the equilibrium AgCl(s) ⇌ Ag⁺ + Cl⁻: extra chloride pushes the equilibrium back toward solid AgCl.

Example: the solubility of AgCl (Ksp = 1.8 × 10⁻¹⁰) in 0.10 M NaCl.

[Ag⁺] [Cl⁻]
Initial 0 0.10
Change +s +s
Equilibrium s 0.10 + s

Ksp = s (0.10 + s). Since s is tiny, 0.10 + s ≈ 0.10, so s = 1.8 × 10⁻¹⁰ / 0.10 = 1.8 × 10⁻⁹ mol/L. In pure water, s = 1.3 × 10⁻⁵ mol/L, so the common ion cuts the solubility by a factor of several thousand.

Python Solubility with and without a common ion

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

This also explains why a heavily salted solution can precipitate a salt, and why washing a precipitate with a little of the common ion solution (instead of pure water) loses less product.

Will a precipitate form? Q versus Ksp

Mix two solutions and compute the ion product Q using the concentrations right after mixing (after dilution). Compare with Ksp:

  • Q < Ksp: unsaturated, no precipitate.
  • Q = Ksp: saturated, at equilibrium.
  • Q > Ksp: supersaturated, a precipitate forms until Q = Ksp.

Example: 50.0 mL of 1.0 × 10⁻³ M AgNO₃ is mixed with 50.0 mL of 1.0 × 10⁻³ M NaCl. After mixing, the volume is 100.0 mL, so each concentration is halved: [Ag⁺] = [Cl⁻] = 5.0 × 10⁻⁴ M. Then Q = 2.5 × 10⁻⁷, which is greater than 1.8 × 10⁻¹⁰, so AgCl precipitates.

The step people forget is dilution. Compute Q from final concentrations.

Python A precipitation predictor

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Selective precipitation

Two ions that both form insoluble salts with the same reagent can often be separated, because the less soluble one precipitates first. Example: a solution contains 0.010 M Cl⁻ and 0.010 M CrO₄²⁻, and you slowly add Ag⁺.

  • AgCl starts to form at [Ag⁺] = 1.8 × 10⁻¹⁰ / 0.010 = 1.8 × 10⁻⁸ M.
  • Ag₂CrO₄ (Ksp = 1.1 × 10⁻¹²) starts at [Ag⁺] = √(1.1 × 10⁻¹² / 0.010) = 1.05 × 10⁻⁵ M.

AgCl needs a much lower silver concentration, so it precipitates first. This idea is used in the Mohr titration for chloride, where the first appearance of red silver chromate signals the end point.

Python Which salt precipitates first?

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

At the moment silver chromate begins to form, only about 1.7 × 10⁻⁵ M chloride is left, so the separation is very good.

pH and solubility

If the anion of a salt is a base (the conjugate base of a weak acid), adding acid makes the salt more soluble. For CaF2(s) ⇌ Ca²⁺ + 2 F⁻, fluoride is a weak base: F⁻ + H⁺ → HF. Adding H⁺ removes F⁻ from the equilibrium, which pulls more CaF₂ into solution. The same happens for carbonates, phosphates, sulfides and hydroxides. That is why limestone (CaCO3) dissolves in acid rain.

Salts whose anions are conjugates of strong acids (AgCl, PbBr₂) do not care about pH, because Cl⁻ and Br⁻ are not basic enough to react with H⁺.

For metal hydroxides, Ksp = [M^(n+)][OH⁻]^n, so the solubility is controlled directly by pH. Raising the pH precipitates hydroxides, and different metals precipitate at different pH values, another route to selective separation.

When you meet a solubility problem, ask first: is there a common ion? Is the anion basic? Is there a complexing agent? Each changes the answer.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. What does adding NaCl do to the solubility of AgCl?

    Chloride is a common ion, so the AgCl dissolution equilibrium shifts back toward the solid.
  2. 2. 25.0 mL of 0.0020 M Pb2+ is mixed with 25.0 mL of 0.0020 M I-. What are the concentrations used to compute Q?

    Mixing equal volumes halves each concentration, so each is 0.0010 M.
  3. 3. If Q > Ksp for a salt in a mixture, what happens?

    An ion product above Ksp means the solution is supersaturated, so solid forms until Q = Ksp.
  4. 4. Which salt's solubility increases most noticeably when the solution is made acidic?

    Carbonate is a base and reacts with H+, which removes it from the equilibrium and dissolves more solid.

Summary

  • A common ion lowers a salt's solubility (Le Chatelier).
  • Compare the ion product Q (from mixed concentrations) with Ksp to predict precipitation.
  • The less soluble salt precipitates first in selective precipitation.
  • Basic anions make salts more soluble in acid; anions of strong acids do not.
  • Hydroxide solubility is set directly by pH.

Next: Buffers and the Henderson–Hasselbalch Equation