Skip to content
Tutorials Center
My learning

Topics

Lesson 24 of 39 ยท Chemical Equilibrium

ICE Tables: Calculating Equilibrium Compositions

Use Initial-Change-Equilibrium tables to find equilibrium concentrations from K, including perfect squares, quadratics and the small-x approximation.

Given K and the starting amounts, how much of each substance is there at equilibrium? The standard method is an ICE table: Initial, Change, Equilibrium. It turns a chemistry question into an algebra problem that you can solve by hand or with code.

The method

  1. Write the balanced equation and the expression for K.
  2. Make a table with a row for Initial concentrations, Change and Equilibrium.
  3. Let the change be x (or โˆ’x) multiplied by each coefficient. Reactants that are used up get โˆ’, products that form get +.
  4. Write each equilibrium concentration as initial plus change.
  5. Substitute into the K expression and solve for x.
  6. Check that every concentration is positive and sensible. Reject nonsense roots.

Example 1: a perfect square

H2(g) + I2(g) โ‡Œ 2 HI(g), Kc = 50 (practice value). A 1.00 L flask starts with 1.00 mol Hโ‚‚ and 1.00 mol Iโ‚‚ and no HI.

[Hโ‚‚] [Iโ‚‚] [HI]
Initial 1.00 1.00 0
Change โˆ’x โˆ’x +2x
Equilibrium 1.00 โˆ’ x 1.00 โˆ’ x 2x

50 = (2x)ยฒ / (1.00 โˆ’ x)ยฒ

Both sides are perfect squares, so take the square root: โˆš50 = 7.071 = 2x / (1.00 โˆ’ x).

Then 7.071 (1.00 โˆ’ x) = 2x, so 7.071 = 9.071 x and x = 0.7795.

Equilibrium: [H2] = [I2] = 0.2205 M and [HI] = 1.559 M.

Python Check Example 1 by solving for x

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Example 2: a quadratic

N2O4(g) โ‡Œ 2 NO2(g), suppose Kc = 0.50 (a practice value; real values depend on temperature). Start with [N2O4] = 1.00 M and no NOโ‚‚.

[Nโ‚‚Oโ‚„] [NOโ‚‚]
Initial 1.00 0
Change โˆ’x +2x
Equilibrium 1.00 โˆ’ x 2x

0.50 = (2x)ยฒ / (1.00 โˆ’ x) gives 4xยฒ = 0.50 โˆ’ 0.50x, so 4xยฒ + 0.50x โˆ’ 0.50 = 0.

The quadratic formula x = (โˆ’b ยฑ โˆš(bยฒ โˆ’ 4ac)) / (2a) with a = 4, b = 0.50, c = โˆ’0.50 gives two roots, about 0.2965 and โˆ’0.4215. The negative root would make [NO2] = 2x negative, which is impossible, so x = 0.2965. Then [N2O4] = 0.7035 M and [NO2] = 0.593 M.

Python A general ICE-table solver

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Always plug the answers back into K to confirm. The program's check line reproduces Kc = 0.50.

The small-x approximation

If K is very small compared with the starting concentration, then x is tiny, and 1.00 โˆ’ x โ‰ˆ 1.00. This removes the quadratic. Use the "5 percent rule": after solving the approximate problem, check that x is less than 5 percent of the initial concentration. If it is not, solve the quadratic properly.

Example: A โ‡Œ B + C with K = 1.0 ร— 10โปโถ and [A]โ‚€ = 0.20 M. The ICE setup gives K = xยฒ / (0.20 โˆ’ x). Approximating 0.20 โˆ’ x โ‰ˆ 0.20, xยฒ = 2.0 ร— 10โปโท, x = 4.5 ร— 10โปโด. That is 0.22 percent of 0.20, so the approximation is fine.

Python Approximation versus the exact answer

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The first case passes the 5 percent test. The other two do not: the approximation errs noticeably, so solve exactly.

Starting with products or with a mix

An ICE table works even if you begin with both sides. First compute Q to decide the direction. If Q < K, use + on the products. If Q > K, flip the signs so reactants form. A wrong direction does not ruin the method, since x comes out negative, but then you need to interpret it.

If you know one equilibrium concentration, you can often work out x directly from the table without solving anything: the "change" row connects all species through the coefficients.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. In an ICE table for 2 A โ‡Œ B, if [A] decreases by 2x, what is the change in [B]?

    Two moles of A make one mole of B, so if A changes by -2x, B changes by +x.
  2. 2. Why might you reject one root of the quadratic in an equilibrium problem?

    Concentrations cannot be negative, so a root that makes any equilibrium concentration negative is rejected.
  3. 3. When is the small-x approximation reasonable?

    The approximation assumes the change is small compared with the starting amount, and the 5 percent test checks that.
  4. 4. For H2 + I2 โ‡Œ 2 HI with K = 50 starting from 1.00 M of each reactant, what is [HI] at equilibrium (to 3 significant figures)?

    x = 0.7795, so [HI] = 2x = 1.559, about 1.56 M.

Summary

  • An ICE table organizes Initial, Change and Equilibrium concentrations.
  • Changes are multiples of x set by the coefficients.
  • Substitute into K, solve for x, reject impossible roots, and check by recomputing K.
  • Perfect squares can be solved by taking square roots; others need the quadratic formula.
  • If K is small, the 5 percent rule can justify ignoring x next to the initial concentration.

Next: Le Chatelier's Principle