Skip to content
Tutorials Center
My learning

Topics

Lesson 31 of 39 · Redox and Electrochemistry

Balancing Redox Equations with Half-Reactions

Balance redox equations in acidic and basic solution step by step with the half-reaction method, and check atoms and charge with a small program.

Redox equations are often too complicated to balance by inspection. The half-reaction method splits the reaction into an oxidation half and a reduction half, balances each for atoms and charge, and then adds them so the electrons cancel.

The steps for acidic solution

  1. Write the two unbalanced half-reactions (identify what is oxidized and reduced).
  2. Balance every element except H and O.
  3. Balance O by adding H2O.
  4. Balance H by adding H⁺.
  5. Balance charge by adding electrons (e⁻) to the more positive side.
  6. Multiply each half-reaction so the electrons match.
  7. Add the half-reactions, cancel electrons and anything that appears on both sides.
  8. Check atoms and charge.

Example: permanganate and iron(II) in acid

Skeleton: MnO4⁻ + Fe²⁺ → Mn²⁺ + Fe³⁺.

Reduction half: MnO4⁻ → Mn²⁺

  • Mn is balanced. Add 4 H2O on the right to balance oxygen: MnO4⁻ → Mn²⁺ + 4 H2O.
  • Balance H with 8 H⁺ on the left: MnO4⁻ + 8 H⁺ → Mn²⁺ + 4 H2O.
  • Charge: left is −1 + 8 = +7, right is +2. Add 5 e⁻ on the left: MnO4⁻ + 8 H⁺ + 5 e⁻ → Mn²⁺ + 4 H2O.

Oxidation half: Fe²⁺ → Fe³⁺ + e⁻.

Multiply the iron half by 5 so five electrons are available, and add:

MnO4⁻ + 8 H⁺ + 5 Fe²⁺ → Mn²⁺ + 4 H2O + 5 Fe³⁺

Charge check: left −1 + 8 + 10 = +17, right +2 + 15 = +17.

Example: dichromate and iron(II)

Cr2O7²⁻ + 14 H⁺ + 6 Fe²⁺ → 2 Cr³⁺ + 7 H2O + 6 Fe³⁺. The dichromate half takes 6 electrons (two chromium atoms, each going from +6 to +3).

Basic solution

Balance as if the solution were acidic, then add the same number of OH⁻ to both sides as there are H⁺. Combine H⁺ + OH⁻ into H2O and cancel the water that appears on both sides.

Example: permanganate with iodide, making solid MnO₂ and I₂ in base. The balanced result is:

2 MnO4⁻ + 6 I⁻ + 4 H2O → 2 MnO2 + 3 I2 + 8 OH⁻

Atoms: Mn 2 = 2, O 8 + 4 = 12 on the left and 4 + 8 = 12 on the right, H 8 = 8, I 6 = 6. Charge: left −2 − 6 = −8, right −8.

Always finish with a check. Count each element on both sides, then compare total charge. Both must match.

Check with code

A balanced equation conserves atoms and charge. The program below reads simple formulas such as MnO4^- or Fe^2+, counts atoms and charge on each side, and reports whether the equation is balanced. It does not balance anything for you; it is a checker.

Python An atom and charge checker

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Balancing by oxidation numbers

An alternative method uses oxidation numbers. Find the total increase in oxidation number for the oxidized atoms and the total decrease for the reduced atoms, and choose coefficients so the changes match. Then balance the remaining atoms by inspection. This is quick for simple equations.

Example: Cu + HNO3 → Cu(NO3)2 + NO + H2O. Cu increases by 2 each, and N decreases by 3 each (from +5 to +2). The lowest common multiple is 6, so use 3 Cu and 2 NO. Balance the rest: 3 Cu + 8 HNO3 → 3 Cu(NO3)2 + 2 NO + 4 H2O. Check: N is 8 on the left, and 6 + 2 = 8 on the right; H 8 = 8; O 24 = 18 + 2 + 4.

Python Verify the copper and nitric acid equation

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. In the half-reaction method, what do you add to balance oxygen in acidic solution?

    Oxygen is balanced with H2O, then hydrogen with H+.
  2. 2. MnO4- + 8 H+ + ? e- → Mn2+ + 4 H2O. How many electrons are needed?

    Left charge is -1 + 8 = +7 and right is +2, so 5 electrons are added on the left.
  3. 3. How do you convert an acidic-solution equation to basic solution?

    Adding OH- on both sides neutralizes the H+ to form water, which is then simplified.
  4. 4. Why must the electrons cancel when you add the half-reactions?

    In a redox reaction electrons are transferred, so none are left over in the overall equation.

Summary

  • Split into half-reactions, balance atoms (other than H and O), then O with H₂O, H with H⁺, and charge with e⁻.
  • Scale the halves so electrons match, add, and cancel.
  • For basic solution add OH⁻ to neutralize H⁺ on both sides.
  • Always check atoms and total charge.
  • The oxidation-number method also works for simple equations.

Next: Galvanic Cells and Standard Potentials