Skip to content
Tutorials Center
My learning

Topics

Lesson 32 of 39 · Redox and Electrochemistry

Galvanic Cells, Standard Potentials and the Nernst Equation

Understand how galvanic cells turn redox reactions into electricity, calculate cell potentials from standard electrode potentials, and use the Nernst equation.

Put a strip of zinc into copper(II) sulfate solution and copper metal plates out on the zinc while the zinc dissolves. Electrons move directly from zinc to copper ions, and the energy is released as heat. A galvanic cell (also called a voltaic cell) keeps the two halves of the reaction apart, so electrons must travel through an external wire. That flow is an electric current, and the cell is a battery.

Parts of a galvanic cell

  • Anode: where oxidation happens. In a galvanic cell it is the negative electrode.
  • Cathode: where reduction happens. It is the positive electrode.
  • External circuit: electrons flow from anode to cathode.
  • Salt bridge (or porous barrier): lets ions move to keep each half-cell electrically neutral. Without it, charge would build up and the current would stop.

A helpful phrase: "An Ox" (anode, oxidation) and "Red Cat" (reduction, cathode).

The classic Daniell cell:

  • Anode: Zn(s) → Zn²⁺(aq) + 2 e⁻
  • Cathode: Cu²⁺(aq) + 2 e⁻ → Cu(s)
  • Overall: Zn(s) + Cu²⁺(aq) → Zn²⁺(aq) + Cu(s)

Cell notation lists the anode on the left: Zn(s) | Zn²⁺(aq) || Cu²⁺(aq) | Cu(s). A single vertical line means a phase boundary and a double line means the salt bridge.

flowchart LR
  A["Zn anode<br/>oxidation, negative"] -->|"electrons through wire"| C["Cu cathode<br/>reduction, positive"]
  A -.->|"anions via salt bridge"| C

Electrons travel through the external wire from anode to cathode; ions move through the salt bridge.

Standard electrode potentials

Each half-reaction has a tendency to gain electrons, measured as a standard electrode potential E° relative to the standard hydrogen electrode (SHE), which is defined as 0.00 V. Standard conditions: 1 mol/L solutions, 1 bar gas pressure, 25 °C. Values are tabulated as reduction potentials:

Half-reaction (reduction) E° (V)
F₂ + 2 e⁻ → 2 F⁻ +2.87
MnO₄⁻ + 8 H⁺ + 5 e⁻ → Mn²⁺ + 4 H₂O +1.51
Cl₂ + 2 e⁻ → 2 Cl⁻ +1.36
O₂ + 4 H⁺ + 4 e⁻ → 2 H₂O +1.23
Ag⁺ + e⁻ → Ag +0.80
Fe³⁺ + e⁻ → Fe²⁺ +0.77
Cu²⁺ + 2 e⁻ → Cu +0.34
2 H⁺ + 2 e⁻ → H₂ 0.00
Pb²⁺ + 2 e⁻ → Pb −0.13
Fe²⁺ + 2 e⁻ → Fe −0.44
Zn²⁺ + 2 e⁻ → Zn −0.76
Al³⁺ + 3 e⁻ → Al −1.66
Mg²⁺ + 2 e⁻ → Mg −2.37
Li⁺ + e⁻ → Li −3.04

The more positive the E°, the stronger the oxidizing agent on the left. The more negative, the stronger the reducing agent on the right.

Rules:

  • E°cell = E°cathode − E°anode (both as reduction potentials).
  • Do not multiply E° by the number of electrons: potential does not depend on how many times a half-reaction is written.
  • If E°cell > 0, the reaction as written is spontaneous.

For the Daniell cell: E°cell = +0.34 − (−0.76) = 1.10 V.

Cell potential is directly related to Gibbs free energy and the equilibrium constant:

ΔG° = − n F E°cell and E°cell = (R T / n F) ln K

where n is the number of electrons transferred, F = 96485 C/mol (the Faraday constant), R = 8.314 J mol⁻¹ K⁻¹, T in kelvin. A positive E°cell means negative ΔG° and K > 1.

Python Cell potential, free energy and K for the Daniell cell

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The last case (zinc as cathode, copper as anode) is the Daniell cell run backward. It gives a negative E, so it does not happen on its own.

Non-standard conditions: the Nernst equation

Real cells rarely have 1 M solutions. The Nernst equation corrects the potential with the reaction quotient:

E = E° − (R T / n F) ln Q

At 25 °C, converting to base-10 logarithms, R T / F ln 10 = 0.0592 V, so:

E = E° − (0.0592 / n) log10 Q

For the Daniell cell, Q = [Zn²⁺] / [Cu²⁺]. If [Zn²⁺] = 1.0 M and [Cu²⁺] = 0.010 M, then Q = 100, log Q = 2, and E = 1.10 − (0.0592/2)(2) = 1.04 V. A battery runs down as Q grows. When Q = K, E = 0: the cell is "dead" (at equilibrium).

Python The Nernst equation as concentrations change

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Concentration cells and practical cells

Even identical metals produce a voltage if the solutions have different concentrations. Everyday batteries are galvanic cells: alkaline cells, lead–acid car batteries and lithium-ion cells are all packaged redox reactions. A fuel cell is a galvanic cell with reactants (such as hydrogen and oxygen) fed in continuously.

Standard potentials predict thermodynamics, not speed. A spontaneous reaction can still be very slow, which is why aluminum, whose E° is very negative, survives as a metal: a thin oxide layer protects it.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. Which electrode is the cathode in a galvanic cell?

    Reduction happens at the cathode, which is the positive electrode in a galvanic cell.
  2. 2. What is E°cell for a Cu/Ag cell (Cu2+/Cu = +0.34 V, Ag+/Ag = +0.80 V) with silver as the cathode?

    E°cell = E°cathode - E°anode = 0.80 - 0.34 = +0.46 V.
  3. 3. If E°cell is positive, what can you conclude?

    A positive E° means a negative ΔG° and K above 1, so the reaction is thermodynamically favorable.
  4. 4. What happens to the cell potential as the reaction quotient Q increases?

    In the Nernst equation E = E° - (RT/nF) ln Q, a larger Q lowers E, reaching zero at equilibrium.

Summary

  • A galvanic cell separates oxidation (anode) from reduction (cathode); electrons flow through the wire, ions through the salt bridge.
  • E°cell = E°cathode − E°anode, using reduction potentials relative to the SHE.
  • ΔG° = −nFE° and E° = (RT/nF) ln K.
  • The Nernst equation, E = E° − (0.0592/n) log Q at 25 °C, handles non-standard conditions.
  • A positive E° tells you about spontaneity, not speed.

Next: Electrolysis and Faraday's Laws