Skip to content
Tutorials Center
My learning

Topics

Lesson 12 of 39 · Entropy and Free Energy

The Second Law and Spontaneity

Learn what makes a process spontaneous, state the second law as ΔS(universe) > 0, and test melting at different temperatures using ΔS(system) + ΔS(surroundings).

Some changes just happen: ice melts in a warm room, iron rusts, a gas fills its container. Others never happen on their own: rust does not turn back into iron, and a filled container does not squeeze its gas into one corner. A change that proceeds without continuous outside help is called spontaneous. The second law of thermodynamics tells us which direction that is.

What "spontaneous" means (and does not mean)

A spontaneous process occurs by itself once started, in the direction that leads to equilibrium. Important points:

  • Spontaneous does not mean fast. A diamond turning into graphite is spontaneous at room temperature, but it takes unimaginably long. Speed is a matter of kinetics (rates), covered in Reaction Rates.
  • Spontaneous does not mean exothermic. Ice melting above 0 °C is endothermic but spontaneous.
  • A non-spontaneous process can still happen if energy is supplied from outside, for example electrolysis of water.

The second law

Second law: in any spontaneous process, the total entropy of the universe increases.

ΔS_universe = ΔS_system + ΔS_surroundings > 0

  • ΔS_universe > 0: spontaneous (in the direction written).
  • ΔS_universe < 0: not spontaneous (the reverse is spontaneous).
  • ΔS_universe = 0: equilibrium, with no net change.

The system's entropy can fall, as long as the surroundings' entropy rises by more. A refrigerator makes things colder (lower entropy inside) by dumping extra heat into the kitchen.

At constant temperature and pressure, ΔS_surr = −ΔH_sys / T, so

ΔS_universe = ΔS_sys − ΔH_sys / T

Two things push a process forward: an increase in system entropy, and a release of heat that raises the surroundings' entropy.

Worked example: does ice melt?

For melting 1 mol of ice, ΔH = +6010 J and ΔS_sys = +22.0 J/K (we treat both as constant with temperature).

At 25 °C (298.15 K):

  • ΔS_surr = −6010 / 298.15 = −20.2 J/K
  • ΔS_univ = +22.0 − 20.2 = +1.8 J/K → positive: spontaneous.

At 0 °C (273.15 K):

  • ΔS_surr = −6010 / 273.15 = −22.0 J/K
  • ΔS_univ ≈ 0: equilibrium. Ice and water coexist.

At −10 °C (263.15 K):

  • ΔS_surr = −6010 / 263.15 = −22.8 J/K
  • ΔS_univ = 22.0 − 22.8 = −0.8 J/K → negative: melting is not spontaneous; freezing is.

The sign flips at the melting point. The competition between system entropy (always favoring melting) and the heat cost (hurting more at low temperature) is the heart of temperature-dependent spontaneity.

Python When does ice melt spontaneously?

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Four cases

Looking at ΔS_univ = ΔS_sys − ΔH_sys / T:

ΔH_sys ΔS_sys Result
negative (exo) positive spontaneous at all temperatures
positive (endo) negative non-spontaneous at all temperatures
negative (exo) negative spontaneous at low T only
positive (endo) positive spontaneous at high T only

You will rewrite this table in terms of Gibbs free energy in the next lesson.

Python Classify a reaction at several temperatures

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The methane combustion entropy used above is a rough value for illustration. The point is the pattern: strongly exothermic reactions are spontaneous even with a negative ΔS.

Reversible and irreversible processes

A reversible process is an idealized one carried out through infinitely small steps, always at equilibrium. It produces the least entropy: ΔS_universe = 0. Real processes are irreversible and generate entropy: ΔS_universe > 0. This is why no machine is perfectly efficient, and why heat engines must always release some heat to a cooler place.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. A spontaneous process always has

    The second law: the total entropy of the universe increases in a spontaneous change. The system's entropy or the enthalpy change alone does not need to be favorable.
  2. 2. A reaction has ΔH < 0 and ΔS_system > 0. It is spontaneous

    Both terms in ΔS_universe = ΔS_sys − ΔH/T are positive, so the total is positive at every T.
  3. 3. Ice melts at 10 °C, an endothermic process. This is possible because

    At 10 °C, ΔS_sys (+22.0 J/K) exceeds the surroundings' loss (-6010/283.15 = -21.2 J/K), so ΔS_univ is positive.
  4. 4. Which statement about spontaneous reactions is correct?

    Spontaneity is about direction (thermodynamics), not speed (kinetics), and endothermic reactions can be spontaneous when entropy rises enough.

Summary

  • A spontaneous process proceeds without continuous outside help; it says nothing about speed.
  • Second law: ΔS_univ = ΔS_sys + ΔS_surr > 0 for a spontaneous process.
  • At constant T and P: ΔS_univ = ΔS_sys − ΔH_sys/T.
  • Signs of ΔH and ΔS give four temperature behaviors.
  • Reversible processes have ΔS_univ = 0; real processes are irreversible.

Next: Gibbs Free Energy