Skip to content
Tutorials Center
My learning

Topics

Lesson 20 of 38 · DC Circuits

Resistors in Series and Parallel

Learn how to combine resistors in series and in parallel, reduce mixed networks step by step, and use voltage and current dividers with worked examples.

Real circuits contain many resistors, and you rarely have time to analyze each one separately. The trick is to replace groups of resistors by a single equivalent resistance that draws the same current from the source. Once you know two simple rules, series and parallel, you can shrink almost any ordinary network down to one resistor.

This lesson shows both rules, why they hold, how to reduce a mixed network, and how to split a voltage or a current between resistors.

Series: one path, one current

Resistors are in series when they are joined end to end so that there is only one path for the current. The same current I flows through each of them, and the voltages add up to the voltage of the source.

Text
R_series = R₁ + R₂ + R₃ + ...

Why does this work? The voltages across the resistors are I R₁, I R₂, and so on. Their sum is I (R₁ + R₂ + ...), which is exactly what a single resistor of value R₁ + R₂ + ... would drop. Adding a resistor in series always increases the total resistance, and the total is always larger than the biggest one.

Parallel: shared voltage, split current

Resistors are in parallel when both of their ends are connected to the same two points. Every branch has the same voltage V, and the currents add up (the junction rule: charge is not lost):

Text
1 / R_parallel = 1 / R₁ + 1 / R₂ + 1 / R₃ + ...

Each branch carries V / Rₖ, so the total current is V (1/R₁ + 1/R₂ + ...). Adding a branch gives the current a new route, so the total resistance decreases. The result is always smaller than the smallest branch. For exactly two resistors there is a handy shortcut:

Text
R_parallel = (R₁ × R₂) / (R₁ + R₂)

Two equal resistors R in parallel give R / 2.

Python Series and parallel calculator

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Reducing a mixed network

Most circuits are a mixture. Work from the far end towards the source, replacing one simple group at a time.

Worked example

A 12 V source (ignore internal resistance) feeds R₁ = 4.0 Ω in series with a parallel pair R₂ = 6.0 Ω and R₃ = 12 Ω.

  1. The parallel pair: (6 × 12) / (6 + 12) = 72 / 18 = 4.0 Ω.
  2. That 4.0 Ω is in series with R₁: R_total = 4.0 + 4.0 = 8.0 Ω.
  3. Source current: I = 12 / 8.0 = 1.5 A.
  4. This 1.5 A passes through R₁, so V₁ = 1.5 × 4.0 = 6.0 V.
  5. The remaining 6.0 V is across the parallel pair. So I₂ = 6.0 / 6.0 = 1.0 A and I₃ = 6.0 / 12 = 0.50 A. These add to 1.5 A, as they must.
flowchart LR
  S["12 V source"] --> A["R1 = 4 ohm"]
  A --> B["R2 = 6 ohm"]
  A --> C["R3 = 12 ohm"]
  B --> D["back to source"]
  C --> D

A series resistor followed by a parallel pair.

Python Check the mixed network

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The last two lines compare the power supplied with the power dissipated. They agree, which is energy conservation at work.

Voltage divider

Two resistors R₁ and R₂ in series across a voltage V share it in proportion to their resistances:

Text
V₂ = V × R₂ / (R₁ + R₂)

A 9.0 V battery across 6.0 kΩ and 3.0 kΩ gives 3.0 V across the 3.0 kΩ resistor. Voltage dividers are used to make a smaller reference voltage, or to turn a changing resistance (such as a light-dependent or temperature-dependent resistor) into a changing voltage that a measuring device can read. A load connected across R₂ is in parallel with it, so it lowers the output: that is the main flaw of a divider.

Current divider

Two resistors in parallel share a total current I so that the smaller resistance gets the larger share:

Text
I₁ = I × R₂ / (R₁ + R₂)

Notice that R₂, the other resistor, is in the numerator. With 6 Ω and 12 Ω and a 1.5 A supply, the 6 Ω branch carries 1.5 × 12 / 18 = 1.0 A, matching the worked example.

Common mistakes

  • Using the parallel formula and forgetting to take the reciprocal at the end. Check: the answer must be smaller than the smallest branch.
  • Calling resistors "in series" just because they look like they are in a line. They are in series only if the same current must flow through both, with no junction between them.
  • Assuming the current in a parallel network is the same in every branch. It is the voltage that is the same.
  • Forgetting that a wire with no resistance across a resistor (a short) removes it from the circuit: the current takes the easy path.
Python A light-sensor voltage divider

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The sensor values here are invented for illustration, but the divider formula is exact.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. Three 30 Ω resistors are connected in parallel. What is the equivalent resistance?

    For n equal resistors R in parallel the result is R / n = 30 / 3 = 10 Ω.
  2. 2. Which statement about resistors in series is correct?

    In series there is only one path, so the same current flows through every resistor. The voltages add instead.
  3. 3. A 6.0 V supply is across 2.0 kΩ and 4.0 kΩ in series. What is the voltage across the 4.0 kΩ resistor?

    V = 6.0 × 4.0 / (2.0 + 4.0) = 4.0 V.
  4. 4. Two branches of 4.0 Ω and 12 Ω are in parallel and 4.0 A enters the pair. What current flows in the 4.0 Ω branch?

    I = 4.0 × 12 / (4.0 + 12) = 3.0 A. The smaller resistor takes the larger share.

Summary

  • Series: same current, voltages add, R = R₁ + R₂ + ....
  • Parallel: same voltage, currents add, 1/R = 1/R₁ + 1/R₂ + ....
  • Reduce mixed networks from the far end toward the source, then work back out for each voltage and current.
  • Voltage divider: V₂ = V R₂ / (R₁ + R₂). Current divider: the smaller resistor carries more current.
  • Check your answers with energy: power supplied equals power dissipated.

Next: Kirchhoff's Laws