Skip to content
Tutorials Center
My learning

Topics

Lesson 37 of 38 · Projects and Practice

Practice Set: Magnetism and Induction

Practice magnetic force, circular motion of charges, fields of solenoids, Faraday's law, inductors and AC circuits with five worked problems and Python checks.

This second practice set covers the magnetic half of the track: forces on charges and wires, fields made by currents, electromagnetic induction, inductors and alternating current. As before, attempt each problem on paper, then compare with the worked solution and run the Python check.

Two habits help especially in magnetism problems:

  • Draw the geometry. Mark the directions of v, B and the loop's normal. Most mistakes are angle mistakes.
  • Convert to SI first. Centimeters to meters, milliteslas to teslas, microfarads to farads.

Useful constants: e = 1.602×10⁻¹⁹ C, m_p = 1.673×10⁻²⁷ kg, μ₀ = 4π×10⁻⁷ T·m/A.

Problem 1: a proton in a magnetic field

A proton moves at 4.0×10⁵ m/s perpendicular to a uniform 0.20 T field. Find (a) the magnetic force and (b) the radius of its circular path.

Solution. (a) F = q v B = 1.602×10⁻¹⁹ × 4.0×10⁵ × 0.20 ≈ 1.28×10⁻¹⁴ N. (b) r = m v / (q B) = (1.673×10⁻²⁷ × 4.0×10⁵) / (1.602×10⁻¹⁹ × 0.20) ≈ 0.0209 m, about 2.1 cm. See charged particles in magnetic fields.

Python Check problem 1

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Problem 2: a wire in a field

A 0.40 m straight wire carries 6.0 A through a 0.25 T field. It makes an angle of 30° with the field. What is the force on it?

Solution. F = B I L sin θ = 0.25 × 6.0 × 0.40 × sin 30° = 0.60 × 0.50 = 0.30 N. The force is perpendicular to both the wire and the field. See force on current-carrying wires.

Python Check problem 2

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Problem 3: a solenoid

A solenoid has 1200 turns wound over a length of 0.30 m and carries 1.5 A. Find the field inside, and the current that would give 20 mT.

Solution. n = 1200 / 0.30 = 4000 turns/m. B = μ₀ n I = 4π×10⁻⁷ × 4000 × 1.5 ≈ 7.5×10⁻³ T. For 20 mT: I = B / (μ₀ n) = 0.020 / (4π×10⁻⁷ × 4000) ≈ 4.0 A. The solenoid's field is proportional to the current.

Python Check problem 3

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Problem 4: induced EMF in a coil

A circular coil of 250 turns and radius 4.0 cm has its axis along a magnetic field. The field falls uniformly from 0.80 T to zero in 0.050 s. Find the average EMF. If the coil's resistance is 5.0 Ω, what is the induced current?

Solution. Area: A = π r² = π × 0.040² ≈ 5.03×10⁻³ m². Flux change per turn: ΔΦ = 0.80 × 5.03×10⁻³ ≈ 4.02×10⁻³ Wb. EMF: ε = N ΔΦ / Δt = 250 × 4.02×10⁻³ / 0.050 ≈ 20.1 V. Current: 20.1 / 5.0 ≈ 4.0 A. By Lenz's law the induced field points along the original field, trying to keep the flux from falling. See also Faraday's law.

Python Check problem 4

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Problem 5: inductor and AC

An 80 mH inductor carries 1.5 A in an LR circuit with R = 16 Ω. (a) How much energy is stored? (b) What is the time constant? (c) What is its reactance at 50 Hz?

Solution. (a) U = ½ L I² = 0.5 × 0.080 × 2.25 = 0.090 J. (b) τ = L / R = 0.080 / 16 = 5.0 ms. (c) X_L = 2π f L = 2π × 50 × 0.080 ≈ 25.1 Ω. These connect inductance with reactance.

Python Check problem 5

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Test yourself

Quick check · 5 questions

of 5 answered You scored / 5 · perfect!

  1. 1. An electron enters a uniform magnetic field with velocity parallel to the field lines. What is its path?

    With v parallel to B the magnetic force is zero, so the electron continues in a straight line at constant speed.
  2. 2. A coil's flux changes from 0.060 Wb to 0.020 Wb in 0.10 s. The coil has 30 turns. What is the average EMF magnitude?

    ε = N ΔΦ / Δt = 30 × 0.040 / 0.10 = 12 V.
  3. 3. A transformer with 500 primary turns and 50 secondary turns is connected to 230 V AC. The ideal secondary voltage is:

    V_s = 230 × 50 / 500 = 23 V.
  4. 4. Two long parallel wires carry 8.0 A and 12 A in the same direction, 4.0 cm apart. What is the force per meter between them?

    F/L = μ₀ I₁ I₂ / (2π d) = 2×10⁻⁷ × 96 / 0.040 = 4.8×10⁻⁴ N/m; same-direction currents attract.
  5. 5. The RMS voltage across a resistor is 120 V. What is the peak voltage?

    V₀ = √2 × 120 ≈ 170 V.

Summary

  • Charge in a field: F = q v B sin θ, r = m v / (q B).
  • Wire in a field: F = B I L sin θ; parallel wires F/L = μ₀ I₁ I₂ / (2π d).
  • Solenoid: B = μ₀ n I; induction: ε = N ΔΦ/Δt.
  • Inductor energy ½ L I², time constant L/R, reactance 2π f L.
  • Always convert to SI and draw the geometry before computing.

Next: Project: Simulate a Series RLC Circuit