Skip to content
Tutorials Center
My learning

Topics

Lesson 3 of 38 ยท Getting Started

Conductors, Insulators and Charging

Understand conductors, insulators and semiconductors, and how friction, conduction and induction charge objects, with a charge-sharing calculation.

Why can you hold a plastic comb but not touch a live bare wire? Why does a metal doorknob give you a spark in winter? The answer is how freely charge can move through a material. In this lesson you sort materials into groups and learn three ways to put a net charge on an object.

Conductors and insulators

In a conductor some electrons are not tied to a single atom. They move easily through the material. Metals such as copper, aluminum and silver are good conductors. Salt water and the human body conduct too, because they contain mobile charged particles (ions in water).

In an insulator (also called a dielectric) electrons stay bound to their atoms. Charge cannot flow easily. Rubber, glass, dry wood, plastic and dry air are insulators.

Semiconductors such as silicon sit in between. Their conductivity depends strongly on temperature, light and added impurities. All computer chips rely on them.

Type Examples Mobile charge
Conductor copper, aluminum, graphite many free electrons
Insulator glass, rubber, plastic almost none
Semiconductor silicon, germanium few, controllable

No material is a perfect insulator or conductor. The difference in conductivity between copper and rubber is a factor of more than 10ยนโธ, so the labels are very useful in practice.

Three ways to charge an object

Charging by friction

Rub two materials Electrons move from one to the other
1 / 3

By friction

Rubbing two materials together can move electrons from one surface to the other. Which one gains electrons depends on the pair (a list called the triboelectric series). The two objects end up with equal and opposite charges, as conservation requires.

By conduction

Touching a charged conductor to a neutral one lets charge spread over both. The two end with the same sign. If two identical conducting spheres touch, they share the total charge equally.

Python Sharing charge between two identical spheres

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The total charge (6.0 nC) is the same before and after every step. Identical spheres are required for an equal split; unequal sizes share charge differently.

By induction

Induction charges an object without touching it with the charged rod.

  1. Bring a negative rod near (not touching) a neutral metal sphere. Electrons in the sphere are repelled to the far side. The near side becomes positive, the far side negative. The total charge is still zero.
  2. While the rod stays there, ground the sphere with a wire. Electrons flow out to the ground.
  3. Remove the wire first, then remove the rod.
  4. The sphere now has a net positive charge, the opposite sign to the rod.

Notice the order: remove the ground connection before the rod. Otherwise the electrons come back.

flowchart LR
  A["Neutral sphere"] --> B["Bring negative rod near"]
  B --> C["Charges separate"]
  C --> D["Ground the sphere"]
  D --> E["Remove ground, then rod"]
  E --> F["Sphere is positive"]

Steps of charging a sphere by induction.

Why a charged object attracts a neutral one

A charged balloon sticks to a wall. The wall is neutral, but the balloon's charge shifts the charges inside the wall slightly (this is called polarization). The nearer charges are of the opposite sign, so they are closer and pull slightly harder than the farther ones push. The result is a small attraction.

Python Why near charges win: a simple model

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

This is a simple model with made-up values to show the trend: the net force is always attractive and gets smaller quickly with distance.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. Which material is the best conductor?

    Copper has many free electrons that move easily.
  2. 2. Two identical metal spheres with +6 nC and -2 nC touch and are separated. What is each sphere's charge?

    Total = +4 nC, shared equally gives +2 nC each.
  3. 3. A negative rod is brought near a grounded neutral sphere, then the ground is removed, then the rod. The sphere becomes

    Electrons were driven to ground, leaving a net positive charge.
  4. 4. Why does a charged balloon attract small neutral pieces of paper?

    The nearer induced charge is opposite in sign and the force falls with distance, so the attraction wins.

Summary

  • Conductors have mobile charge; insulators do not; semiconductors are in between.
  • Friction transfers electrons and leaves equal and opposite charges.
  • Conduction gives the same sign; induction gives the opposite sign.
  • A neutral object can be attracted to a charged one by polarization.

Next: Units and Scales in Electromagnetism