Skip to content
Tutorials Center
My learning

Topics

Lesson 29 of 38 · Electromagnetic Induction

Generators and Motors

See how a rotating coil makes an alternating EMF, calculate the peak and RMS voltage of a generator, and learn about back EMF in electric motors.

Hydroelectric dams, wind turbines, gas turbines and nuclear power stations all do the same last step: they spin a coil of wire in a magnetic field. The motion changes the flux, Faraday's law gives an EMF, and electrical energy flows into the grid. An electric motor is essentially the same machine run in reverse: electrical energy goes in and a shaft turns.

In this lesson you will derive the EMF of a simple AC generator, see how motors produce a "back EMF" that limits their current, and relate the two machines.

The AC generator

Picture a rectangular coil of N turns and area A, rotating at constant angular speed ω in a uniform field B. Let θ = ω t be the angle between the field and the coil's normal. The flux through the coil is

Text
Φ = N B A cos(ω t)

Using Faraday's law, ε = -dΦ/dt:

Text
ε = N B A ω sin(ω t)

The EMF is a sine wave. Its peak value is

Text
ε₀ = N B A ω

and the angular speed relates to the frequency f (rotations per second) and period T by ω = 2π f = 2π / T.

The EMF is zero when the coil's plane is perpendicular to the field (the flux is at its maximum and momentarily not changing) and largest when the plane is parallel to the field (flux is zero but changing fastest).

Worked example

A generator coil has N = 100 turns, area A = 0.020 m², spins in B = 0.50 T at f = 50 Hz.

  1. ω = 2π × 50 = 314.16 rad/s.
  2. Peak EMF: ε₀ = 100 × 0.50 × 0.020 × 314.16 ≈ 314 V.
  3. The RMS value (explained in the AC lessons) is ε₀ / √2 ≈ 222 V.

To raise the EMF you can add turns, enlarge the coil, strengthen the field or spin it faster. Power stations use many coils and powerful electromagnets for the field.

Python Generator EMF over time

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

From AC to DC

The EMF alternates direction twice per rotation. Slip rings (two continuous rings, each touching one end of the coil through brushes) deliver this alternating current unchanged. A commutator, a split ring that swaps the connections every half rotation, turns it into a pulsating direct current whose sign never changes. Multiple coils at different angles, plus smoothing circuits, make the output nearly steady.

flowchart LR
  A["Mechanical energy: turbine turns shaft"] --> B["Coil rotates in magnetic field"]
  B --> C["Changing flux: Faraday's law"]
  C --> D["Alternating EMF"]
  D --> E["Electrical energy to the grid"]

Energy flow in a generator.

The electric motor

A DC motor has a current-carrying coil in a magnetic field. The force on its sides gives a torque (from the earlier lesson on wires) and the coil spins. A commutator reverses the current each half turn so that the torque keeps the same direction.

But there is a twist. As soon as the coil turns, it is a coil rotating in a magnetic field, which is exactly a generator. It develops an EMF. By Lenz's law that EMF opposes the change that causes it, namely the supply current. It is called the back EMF ε_b, and it is proportional to the speed:

Text
V_supply = ε_b + I R
I = (V_supply - ε_b) / R

where R is the resistance of the coil.

  • At the moment of switching on, the motor is not turning, so ε_b = 0 and the current is large: I = V / R. This is the starting surge, and why lights can dim when a big motor starts.
  • As the motor speeds up, ε_b rises and the current falls.
  • Under a heavy load, the motor slows, ε_b drops and more current flows. A jammed motor draws a very large current and can burn out.

Worked example

A DC motor with coil resistance R = 2.0 Ω runs from a 12 V supply. At full speed the back EMF is 10 V.

  • Running current: I = (12 - 10) / 2.0 = 1.0 A.
  • Starting current: 12 / 2.0 = 6.0 A.
  • Electrical power input at full speed: 12 × 1.0 = 12 W. Of this I² R = 2.0 W is heat in the coil, and ε_b I = 10 W is converted to mechanical power (before friction losses).
Python Motor current as it speeds up

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The simple assumption here is that the back EMF is proportional to speed. The mechanical power peaks when the back EMF is half the supply voltage (6 V here, half of the no-load speed), consistent with the maximum power transfer ideas from earlier in the chapter.

Generators versus motors

Generator Motor
Energy in Mechanical (turning shaft) Electrical
Energy out Electrical Mechanical
Key effect Induced EMF (Faraday) Force on current (B I L)
Opposing effect Retarding torque (Lenz) Back EMF (Lenz)

Many machines can do both jobs. Electric cars use their motors as generators when braking (regenerative braking), returning some energy to the battery.

Common mistakes

  • Taking the EMF to be largest when the flux is largest. It is largest when the flux is changing fastest, which is when the flux is zero.
  • Using f in the formula where ω is needed. Convert with ω = 2π f.
  • Forgetting the back EMF and computing a motor's running current as V / R, which is far too large.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. What is the peak EMF of a coil with N = 50, A = 0.040 m², spinning in B = 0.20 T at ω = 100 rad/s?

    ε₀ = N B A ω = 50 × 0.20 × 0.040 × 100 = 40 V.
  2. 2. At what coil position is the generator's EMF zero?

    At that position the flux is at a maximum and momentarily not changing, so dΦ/dt = 0.
  3. 3. A motor with coil resistance 4.0 Ω runs from 24 V with a back EMF of 20 V. What is the current?

    I = (24 - 20) / 4.0 = 1.0 A.
  4. 4. Why is the current largest when a motor is first switched on?

    With no rotation there is no back EMF, so I = V / R.

Summary

  • A coil rotating in a uniform field gives ε = N B A ω sin(ω t), peak ε₀ = N B A ω.
  • The EMF is largest when the flux changes fastest, and zero when the flux is at its maximum.
  • Slip rings give AC output; a split-ring commutator gives pulsating DC.
  • A motor generates a back EMF opposing the supply: I = (V - ε_b) / R.
  • Generators turn mechanical energy into electrical; motors do the reverse.

Next: Inductance and LR Circuits