Skip to content
Tutorials Center
My learning

Topics

Lesson 33 of 38 ยท AC Circuits and Electromagnetic Waves

Resonance and Power Factor

Learn series RLC resonance: the resonant frequency, current peak, Q factor and bandwidth, plus power factor and how factories correct it with capacitors.

Push a child on a swing. If you push at random times, not much happens. If you push in time with the swing's natural frequency, a few small pushes build up a large motion. Electrical circuits with an inductor and a capacitor behave the same way: they have a natural frequency at which energy sloshes back and forth between the electric field of the capacitor and the magnetic field of the inductor. Drive the circuit at that frequency and the response is large.

This effect, resonance, is how a radio picks one station out of thousands. This lesson covers the resonant frequency, the Q factor, and a closely related topic from the electric power industry: power factor.

The resonant frequency

In a series RLC circuit the impedance is Z = โˆš(Rยฒ + (X_L - X_C)ยฒ). It is smallest when X_L = X_C, so that the reactances cancel and Z = R. Setting ฯ‰ L = 1 / (ฯ‰ C) gives

Text
ฯ‰โ‚€ = 1 / โˆš(L C),      fโ‚€ = 1 / (2ฯ€ โˆš(L C))

At fโ‚€:

  • The impedance is at its minimum, Z = R, so the current is at its maximum, I = V / R.
  • The phase angle is zero: current and voltage are in phase, and the circuit looks purely resistive.
  • The power factor is 1.

Below fโ‚€ the circuit behaves like a capacitor (X_C > X_L); above it, like an inductor.

Worked example

A circuit has L = 10 mH, C = 1.0 ฮผF and R = 10 ฮฉ, supplied by 5.0 V RMS.

  • โˆš(L C) = โˆš(1.0ร—10โปโธ) = 1.0ร—10โปโด s.
  • ฯ‰โ‚€ = 1.0ร—10โด rad/s, fโ‚€ = 1.0ร—10โด / 2ฯ€ โ‰ˆ 1592 Hz.
  • At resonance I_rms = 5.0 / 10 = 0.50 A.
  • X_L = ฯ‰โ‚€ L = 100 ฮฉ, so V_L = 0.50 ร— 100 = 50 V: ten times the supply voltage. The same size appears (opposite in sign) across the capacitor.
Python Current versus frequency near resonance

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

A smaller resistance gives a taller, narrower peak. A larger R damps the response.

Q factor and bandwidth

The quality factor Q measures how sharp the resonance is:

Text
Q = ฯ‰โ‚€ L / R = 1 / (ฯ‰โ‚€ C R) = (1 / R) โˆš(L / C)

For our example Q = 100 / 10 = 10. At resonance, the voltage across the inductor (or capacitor) is Q times the supply voltage. A high Q means a very selective circuit, such as a radio tuner that must reject the neighboring stations, but also high internal voltages.

The bandwidth (the width of the peak where the power is at least half the maximum) is

Text
ฮ”f โ‰ˆ fโ‚€ / Q

For Q = 10 and fโ‚€ โ‰ˆ 1592 Hz, ฮ”f โ‰ˆ 159 Hz. (This approximation is excellent for Q well above about 5; the exact bandwidth is R / (2ฯ€ L), which here equals 10 / (2ฯ€ ร— 0.01) โ‰ˆ 159 Hz as well.)

flowchart LR
  A["Low frequency: capacitive"] --> B["f0: X_L = X_C, Z = R, current peaks"]
  B --> C["High frequency: inductive"]

Behavior of a series RLC circuit across its resonant frequency.

Python Resonance quantities from component values

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The last calculation shows how a variable capacitor tunes a simple radio: changing C moves fโ‚€.

Power factor

For any AC load, the average power is P = V_rms I_rms cos ฯ†. The quantity V_rms I_rms is the apparent power S, measured in volt-amperes (VA); the real power P is in watts. The ratio is the power factor: pf = P / S = cos ฯ†. For a series RLC circuit cos ฯ† = R / Z.

Why does it matter? Many industrial loads, such as electric motors, are inductive, so their current lags the voltage and cos ฯ† is less than 1. For a given real power, a low power factor means a bigger current. That extra current flows through the cables and transformers of the supplier, heating them (Iยฒ R loss) without delivering extra useful power. Utilities often penalize customers with low power factor.

Power factor correction

The fix is to cancel the inductive reactive power with a capacitor, whose current leads. Take a motor taking P = 2.0 kW from 230 V, 50 Hz at pf = 0.80 lagging.

  1. Current before: I = P / (V pf) = 2000 / (230 ร— 0.80) โ‰ˆ 10.9 A.
  2. tan ฯ† = tan(arccos 0.80) = 0.75. The reactive power is Q = P tan ฯ† = 1500 var.
  3. To reach pf = 1, a parallel capacitor must supply 1500 var: Q = ฯ‰ C Vยฒ, so C = 1500 / (314.16 ร— 230ยฒ) โ‰ˆ 9.0ร—10โปโต F = 90 ฮผF.
  4. Current after: I = 2000 / 230 โ‰ˆ 8.7 A.

The motor itself still draws the same current; the capacitor supplies the reactive part locally, so the cables carry less.

Python Power factor correction capacitor

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Household electricity meters generally measure real energy, so homes are not charged for poor power factor, but industrial customers often are.

Common mistakes

  • Using fโ‚€ = 1 / (2ฯ€ L C). The square root of L C is needed.
  • Believing Q makes the current larger than V/R. It increases the voltage across L and C, not the current.
  • Confusing real power (watts) with apparent power (volt-amperes).
  • Thinking a capacitor "uses" power in a power factor correction. An ideal capacitor dissipates none; it only supplies reactive current.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. What is the resonant frequency of a series circuit with L = 25 mH and C = 0.10 ฮผF?

    fโ‚€ = 1 / (2ฯ€ โˆš(25ร—10โปยณ ร— 0.10ร—10โปโถ)) = 1 / (2ฯ€ ร— 5.0ร—10โปโต) โ‰ˆ 3183 Hz.
  2. 2. At resonance in a series RLC circuit, which statement is true?

    At resonance X_L = X_C, so they cancel; Z = R and the current is in phase with the voltage.
  3. 3. A series circuit has ฯ‰โ‚€ L = 200 ฮฉ and R = 8.0 ฮฉ. What is Q?

    Q = ฯ‰โ‚€ L / R = 200 / 8.0 = 25.
  4. 4. A load takes 1.5 kW from 230 V at power factor 0.60. What is the line current?

    I = P / (V pf) = 1500 / (230 ร— 0.60) โ‰ˆ 10.9 A.

Summary

  • Resonance occurs at fโ‚€ = 1 / (2ฯ€ โˆš(L C)), where X_L = X_C, Z = R and the current is largest.
  • Quality factor Q = ฯ‰โ‚€ L / R; bandwidth ฮ”f โ‰ˆ fโ‚€ / Q (exactly R / (2ฯ€ L) in a series circuit).
  • At resonance the voltage across L and C is Q times the supply.
  • Power factor cos ฯ† = P / S = R / Z; low values mean extra current for the same real power.
  • Capacitors in parallel with inductive loads correct the power factor.

Next: Transformers and Power Transmission