Skip to content
Tutorials Center
My learning

Topics

Lesson 15 of 38 · Current and Resistance

Electric Current and Drift Velocity

Define electric current I = dQ/dt, conventional current direction, current density and electron drift velocity, with a copper wire calculation in Python.

So far the charges stayed in place. Electric current is what happens when charges move in a steady flow. Every device with a wire, from a phone to a train, relies on it. In this lesson you define current precisely, learn the direction convention, and find out something surprising: the electrons in a wire crawl along slower than a snail, yet the lamp lights instantly.

Definition of current

Current is the rate at which charge passes a point (a cross-section of a wire):

Text
I = ΔQ / Δt        (average)         I = dQ/dt        (instantaneous)

The unit is the ampere (A): 1 A = 1 C/s. If 2.0 C pass a point in 0.50 s, the current is 4.0 A.

Going the other way: the charge that flows in time t at steady current is Q = I t. A battery rated 3000 mA·h is rated for 3.0 A·h, which equals 3.0 A × 3600 s = 10,800 C of charge moved through the circuit.

Python Charge from current and time

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Conventional current

Benjamin Franklin guessed that positive charge moves. We now know that in metals the moving charges are electrons (negative). We keep Franklin's convention anyway: conventional current is drawn as the direction positive charges would move, from the positive terminal of a battery around the circuit to the negative terminal. Electrons actually move the opposite way.

In other conductors the carriers differ: in salt water both positive and negative ions move, and in a semiconductor "holes" act like positive carriers. The physics of I = dQ/dt stays the same: use the direction of positive flow.

Current is a scalar in circuits (a signed number along the wire), but current density J is a vector. It is the current per unit cross-sectional area: J = I / A, in A/m².

Drift velocity

Inside a metal, free electrons zig-zag at high speed (about 10⁶ m/s) and collide randomly with the lattice. When you apply an electric field, a small drift is added on top, along the wire. The average drift speed v_d is related to the current by

Text
I = n q v_d A

where n is the number of free carriers per cubic meter, q is the carrier charge, and A is the wire's cross-sectional area. (Imagine a tube of length v_d per second: it holds n A v_d charges, each carrying q.)

Solving: v_d = I / (n q A). For copper n ≈ 8.5 × 10²⁸ m⁻³ (about one free electron per atom).

Python Drift speed in a copper wire

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

At 1 A in a 2 mm² wire the drift speed is only about 0.04 mm/s, which is slower than a snail. Why do lights come on immediately then? The wire is already full of free electrons. The field travels along the wire at a large fraction of the speed of light and makes all electrons start drifting together, like pushing a full pipe of water at one end.

Thinner wire has smaller A, so for the same current the electrons drift faster.

Current density in a non-uniform wire

If a wire narrows, the current (a flow of charge) must stay the same, because charge does not pile up. So the current density J = I/A is larger in the narrow part, and so is the drift speed.

Python A wire that narrows

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Four times thinner in diameter means sixteen times smaller area, and sixteen times higher current density and drift speed.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. A steady current of 5.0 A flows for 2.0 minutes. How much charge passes?

    Q = I t = 5.0 × 120 s = 600 C.
  2. 2. In a copper wire the electrons move

    Conventional current is the direction of positive charge flow; electrons are negative and go the other way.
  3. 3. If the cross-section of a wire is halved while the current is unchanged, the drift speed

    v_d = I/(nqA): smaller A gives larger v_d.
  4. 4. Why does a lamp light almost instantly when you flip a switch, even though electrons drift slowly?

    All electrons in the circuit start drifting together as the field propagates.

Summary

  • I = dQ/dt, in amperes (1 A = 1 C/s); Q = I t for steady current.
  • Conventional current points the way positive charge would move, opposite to electron flow in metals.
  • Current density J = I/A; drift velocity v_d = I/(n q A).
  • Drift speeds are tiny (fractions of a mm/s), but the signal arrives almost instantly.

Next: Resistance and Ohm's Law