Skip to content
Tutorials Center
My learning

Topics

Lesson 11 of 38 ยท Electric Potential and Capacitors

Equipotentials and the Field from Potential

Learn equipotential surfaces, why field lines cross them at right angles, and how to find the electric field from the potential with E = -dV/dx.

The potential V is a number at every point in space. If you connect all the points that have the same V, you get an equipotential surface. These surfaces are like contour lines on a map: they show hills and valleys of potential. In this lesson you learn how they relate to field lines and how to get the field from the potential.

Equipotential surfaces

For a point charge, V = kQ/r is the same at all points at a given r, so the equipotentials are spheres around the charge (circles in a 2D drawing). For a uniform field they are flat planes perpendicular to the field.

Key facts:

  • No work is needed to move a charge along an equipotential, because ฮ”V = 0.
  • The electric field is always perpendicular to an equipotential surface. If it had a component along the surface, a charge would gain energy moving along it, which contradicts constant V.
  • The field points from high to low potential.
  • A conductor in equilibrium is an equipotential volume, and its surface is an equipotential surface.
Python Equipotentials and field lines of two charges

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The gray field lines cross the colored equipotential curves at right angles. The 0 V curve is the vertical line halfway between the equal and opposite charges.

From potential to field

Potential changes as you move. The field is the slope of the potential, with a minus sign:

Text
E_x = -dV/dx

In words: the field points in the direction in which V decreases fastest, and its size is how steeply V drops. In three dimensions E = -โˆ‡V, i.e. each component is minus the partial derivative of V in that direction.

Uniform field

If V falls linearly, V(x) = Vโ‚€ - E x, then -dV/dx = E is constant. Between two parallel plates separated by d with voltage V across them:

Text
E = V / d

This also gives a convenient unit: 1 V/m = 1 N/C. A 12 V battery across plates 2.0 cm apart creates E = 12 / 0.020 = 600 V/m.

Point charge

V = kQ/r gives E_r = -dV/dr = kQ/rยฒ, which is the familiar point-charge field.

Python Field as the slope of potential

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The numerical derivative matches the formula.

Worked example: a potential that varies

Suppose along the x-axis the potential is V(x) = 5xยฒ - 3x (in volts, with x in meters). The field is E_x = -dV/dx = -(10x - 3) = 3 - 10x. At x = 0.1 m this is E_x = 2.0 V/m, pointing in the +x direction. At x = 0.3 m it is 0: the potential has a minimum there, so a charge placed at that point feels no force.

Python Find the zero-field point from a potential

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The field changes sign at x = 0.3 m, where V is smallest.

To remember the sign: a positive charge rolls "downhill" in potential. So E points toward lower V, which is why there is a minus sign in E = -dV/dx.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. How much work is needed to move a charge along an equipotential surface?

    ฮ”V = 0 along the surface, so ฮ”U = qฮ”V = 0.
  2. 2. Electric field lines meet equipotential surfaces

    A field component along the surface would imply a potential change along it.
  3. 3. A voltage of 50 V is applied across parallel plates 5.0 mm apart. The field between them is

    E = V/d = 50 / 0.005 = 10,000 V/m.
  4. 4. If V = 4xยฒ (volts, x in meters), the field at x = 0.5 m is

    E = -dV/dx = -8x = -4 V/m at x = 0.5 m.

Summary

  • Equipotentials join points of equal V; no work is done moving along them.
  • Field lines are perpendicular to equipotentials and point toward lower V.
  • E_x = -dV/dx; for uniform fields E = V/d.
  • 1 V/m = 1 N/C.

Next: Capacitance and Capacitors