Skip to content
Tutorials Center
My learning

Topics

Lesson 16 of 38 · Current and Resistance

Resistance and Ohm's Law

Learn resistance, Ohm's law V = IR, ohmic and non-ohmic devices, and how to read an I-V graph, with worked examples and Python plots.

Apply a voltage across a wire and a current flows. How large is it? That depends on the material and shape of the conductor. Georg Ohm found in the 1820s that for many materials the current is proportional to the voltage. The proportionality constant defines the resistance, one of the most important quantities in electronics.

Resistance

The resistance R of a component is the voltage across it divided by the current through it:

Text
R = V / I        unit: ohm (Ω), 1 Ω = 1 V/A

Rearranged, this is Ohm's law:

Text
V = I R          I = V / R

Strictly, Ohm's law is a statement about a particular kind of material: one for which R stays constant as V and I change. Such components are called ohmic. Metals at constant temperature are ohmic. The definition R = V/I is always usable, even if R changes with V.

Why do conductors resist current? Moving electrons collide with the vibrating atoms and the impurities in the lattice, losing the energy the field gave them. The energy becomes heat.

Python Ohm's law calculator

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

I-V graphs

A graph of current against voltage for an ohmic device is a straight line through the origin, and its slope is 1/R. A steeper line means a smaller resistance.

Some devices are non-ohmic: the line is curved.

  • A filament lamp: as it heats, the resistance rises, so the curve flattens at high voltage.
  • A diode: it conducts in one direction only; the current in the other direction is almost zero until a very large reverse voltage.
  • A thermistor: its resistance changes strongly with temperature.
Python I-V curves: resistor, lamp and diode

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

These are textbook models, not data from a real device. Notice only the shapes: a straight line for the resistor, a curve that flattens for the lamp model, and a sharp turn-on for the diode model.

Worked example 1: finding resistance from a graph

A device carries 0.30 A at 6.0 V and 0.60 A at 12 V. Both points lie on a line through the origin, so the device is ohmic: R = 6.0/0.30 = 20 Ω (check: 12/0.60 = 20 Ω).

Worked example 2: a car headlight

A 12 V headlight lamp draws 4.0 A when lit. Its resistance (when hot) is R = 12 / 4.0 = 3.0 Ω. When cold, a lamp's resistance is much smaller, so the current at switch-on is larger. That is why bulbs often fail at the moment they are switched on.

Voltage across a resistor: the sign convention

Current flows through a resistor from higher to lower potential. The potential drop across it is ΔV = IR. A good mental picture: current is like water through a narrow pipe; the pressure drops along the pipe in the direction of the flow. You will use this in the DC circuits chapter when you apply Kirchhoff's rules.

Python Voltage drops along a chain

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Check your unit habits: kΩ = 10³ Ω, MΩ = 10⁶ Ω. With V in volts and R in kΩ, the current comes out in mA.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. A 220 Ω resistor has 9.0 V across it. The current is about

    I = V/R = 9.0 / 220 ≈ 0.041 A = 41 mA.
  2. 2. On an I-V graph an ohmic resistor appears as

    I = V/R is linear, with slope 1/R.
  3. 3. A device gives 2.0 mA at 5.0 V. Its resistance is

    R = 5.0 / 0.0020 = 2500 Ω = 2.5 kΩ.
  4. 4. Which device is non-ohmic?

    A diode's current is not proportional to voltage.

Summary

  • R = V/I in ohms; Ohm's law V = IR applies to ohmic components.
  • Ohmic: straight I-V line through the origin with slope 1/R. Lamps, diodes and thermistors are non-ohmic.
  • Resistance comes from collisions of charge carriers with the lattice.
  • The voltage drop across a resistor is IR, in the direction of the current.

Next: Resistivity and Temperature