Skip to content
Tutorials Center
My learning

Topics

Lesson 14 of 38 · Electric Potential and Capacitors

Energy in Capacitors and Dielectrics

Learn how much energy a capacitor stores, U = ½CV², the energy density of the field, and how a dielectric material raises capacitance by a factor κ.

A charged capacitor holds energy, which you can release quickly. That is how a camera flash fires, and how a defibrillator delivers a pulse. In this lesson you calculate how much energy a capacitor stores and learn why a dielectric, an insulating material between the plates, lets the same capacitor hold more charge.

Energy stored

Charging a capacitor means moving charge from one plate to the other against the growing voltage. When the charge is q the voltage is q/C, so moving a little more charge dq needs dW = (q/C) dq. Adding up from 0 to Q:

Text
U = Q² / (2C) = ½ C V² = ½ Q V

The three forms are the same, using Q = CV. Doubling the voltage quadruples the energy.

Python Energy stored in capacitors

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

A 100 µF capacitor at 300 V holds 4.5 J, far less than a battery. But it can release this in a fraction of a millisecond, giving enormous power. Capacitors store little energy but deliver it fast.

Energy density of the field

Where is the energy? In the electric field between the plates. For a parallel-plate capacitor, U = ½CV² with C = ε₀A/d and V = Ed gives U = ½ ε₀ E² A d. The volume between the plates is Ad, so the energy density (energy per unit volume) is

Text
u = ½ ε₀ E²       unit: J/m³

This holds for any electric field in vacuum, not just inside capacitors. Light waves, for example, carry energy in their electric fields this way.

Python Energy density of a field

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

At the breakdown field of air the energy density is about 40 J/m³, which is small. So stored electric energy is far less dense than chemical energy.

Dielectrics

A dielectric is an insulator placed between capacitor plates. Its molecules polarize: the field pulls positive and negative charges slightly apart, creating a small opposite field inside the material. The net field is reduced to

Text
E = E₀ / κ

where κ is the dielectric constant (relative permittivity) of the material. For the same charge on the plates, the voltage drops by the factor κ, so the capacitance rises:

Text
C = κ C₀ = κ ε₀ A / d

Approximate values at room temperature: vacuum 1 (exactly), air 1.0006, paper 3 to 4, glass 5 to 10, ceramics from 10 to several thousand, water about 80.

Dielectrics have three benefits: they raise C, they keep plates apart mechanically, and they resist breakdown better than air, which allows higher voltages.

The dielectric constant of a material varies with temperature and frequency. Use the values in tables as typical numbers, not exact ones.

Battery connected or disconnected?

What happens when you insert a dielectric depends on what the capacitor is connected to:

Situation V Q C Energy ½CV²
Battery stays connected same grows by κ grows by κ grows by κ
Battery disconnected first drops to V₀/κ same grows by κ falls by κ

In the disconnected case the energy falls by κ. Where does it go? The dielectric is pulled into the gap by the field, which does work. You would have to hold it back with a force.

Python Inserting a dielectric: two cases

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Both numbers follow the rules in the table.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. How much energy is stored in a 40 µF capacitor charged to 50 V?

    U = ½ × 40e-6 × 50² = 0.05 J.
  2. 2. If the voltage on a capacitor is doubled, the stored energy

    U = ½CV² depends on V².
  3. 3. A dielectric with κ = 5 is inserted into an isolated, charged capacitor. The voltage

    Q stays fixed and C rises by 5, so V = Q/C falls by 5.
  4. 4. The energy density of an electric field E in vacuum is

    u = ½ ε₀ E².

Summary

  • U = ½CV² = Q²/(2C) = ½QV.
  • The energy is stored in the field with density u = ½ ε₀ E².
  • A dielectric of constant κ multiplies capacitance by κ and reduces the field by κ for fixed charge.
  • Whether Q or V stays fixed depends on whether the battery is connected.

Next: Electric Current and Drift Velocity