Skip to content
Tutorials Center
My learning

Topics

Lesson 28 of 38 · Electromagnetic Induction

Lenz's Law and Motional EMF

Find the direction of induced currents with Lenz's law, calculate the motional EMF ε = BLv of a moving rod, and see how eddy currents and energy conservation fit in.

Faraday's law tells you how big the induced EMF is. It leaves open a different question: which way does the induced current flow? The answer, found by the Russian physicist Heinrich Lenz in 1834, is a statement about conservation of energy, and it is both simple and powerful.

In this lesson you will use Lenz's law to find directions, then study the most important special case of induction: a conductor moving through a magnetic field, which produces a motional EMF.

Lenz's law

The induced current flows in the direction that opposes the change in flux that caused it.

That is the meaning of the minus sign in ε = -N dΦ/dt. Nature "resists" the change. Do not read it as "opposes the field" or "opposes the flux": it opposes the change.

Three steps solve most problems:

  1. Decide whether the flux through the loop is increasing or decreasing, and in which direction it points.
  2. The induced current makes its own field that opposes the change: if the flux is increasing, the induced field points the other way; if the flux is decreasing, the induced field points the same way (to keep it up).
  3. Use the right-hand grip rule to find the current direction that produces that induced field.

Example

Push the north pole of a bar magnet toward a loop. The flux through the loop (pointing away from the north pole, into the loop) is increasing. To oppose this, the loop must make a field pointing back toward the magnet, so the near face of the loop becomes a north pole and repels the approaching magnet. Pull the magnet away, and the near face becomes a south pole, which attracts the retreating magnet.

Either way, you must do work to move the magnet, and that work becomes the electrical energy of the induced current. If the induced effect aided the change instead, the magnet would be pulled in, then accelerate, then make even more current, producing energy from nothing. Lenz's law is what makes induction consistent with energy conservation.

flowchart TB
  A["Magnet pushed toward loop"] --> B["Flux through loop increases"]
  B --> C["Induced current makes opposing field"]
  C --> D["Loop repels the magnet"]
  D --> E["You do work: mechanical energy becomes electrical energy"]

Lenz's law and conservation of energy.

Motional EMF

A very common situation: a conductor moves through a magnetic field. Take a straight rod of length L moving with velocity v perpendicular to a uniform field B (and perpendicular to its own length). The free charges in the rod move with it, so the magnetic force q v B pushes them along the rod. Charge builds up at the ends until the electric force balances the magnetic force: q E = q v B. The resulting potential difference along the rod is

Text
ε = B L v

This is the motional EMF. It can also be derived from Faraday's law: if the rod slides along rails, the area of the loop grows by L v dt, so dΦ/dt = B L v.

If the rod is part of a closed circuit with total resistance R, a current I = B L v / R flows.

Worked example

A rod of length L = 0.50 m slides at v = 3.0 m/s on rails in a B = 0.40 T field (field perpendicular to the plane of the rails). The circuit resistance is R = 2.0 Ω.

  1. EMF: ε = B L v = 0.40 × 0.50 × 3.0 = 0.60 V.
  2. Current: I = 0.60 / 2.0 = 0.30 A.
  3. Magnetic force on the rod: F = B I L = 0.40 × 0.30 × 0.50 = 0.060 N, directed against the motion (Lenz's law).
  4. Power you must supply to keep it moving at constant speed: P = F v = 0.060 × 3.0 = 0.18 W.
  5. Power turned into heat: I² R = 0.30² × 2.0 = 0.18 W. They match, as energy conservation demands.
Python Sliding rod energy check

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

What happens if you let go?

If nobody pushes the rod, the retarding force slows it, which reduces the EMF, the current and the force. This gives an exponential slow-down: v(t) = v₀ e^(-t/τ) with τ = m R / (B² L²), where m is the mass of the rod. It is an exact result for this ideal setup (rails without friction, constant resistance).

Python A rod coasting in a magnetic field

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Eddy currents

A changing flux induces currents not only in wires but also in solid pieces of metal. These swirling loops are called eddy currents. Lenz's law means they oppose the change, which can be useful or wasteful:

  • Magnetic braking in some trains and roller coasters: a metal fin moving past magnets feels a drag force with no contact and no wear.
  • Induction cooktops: a rapidly changing field induces eddy currents in the pot, which heat it.
  • Wasted energy in transformers: iron cores are made of thin insulated sheets (laminations) to cut down eddy currents.

Common mistakes

  • Saying the induced field "opposes the original field." It opposes the change in flux: if the flux is decreasing, the induced field points the same way as the original.
  • Applying ε = B L v when the velocity is not perpendicular to both B and the rod. Use the component of v that is.
  • Forgetting that a closed circuit is needed for a current; an open rod has an EMF but no sustained current.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. A rod 0.80 m long moves at 5.0 m/s perpendicular to a 0.20 T field. What is the motional EMF?

    ε = B L v = 0.20 × 0.80 × 5.0 = 0.80 V.
  2. 2. The south pole of a magnet is pulled away from a loop. What does the near face of the loop become, by Lenz's law?

    The flux from the south pole is decreasing, so the loop makes field in the same direction as before: the near face becomes a north pole, which attracts the retreating south pole.
  3. 3. Which principle does Lenz's law express?

    If induced currents helped the change, energy would be created from nothing.
  4. 4. Why are transformer cores made of thin laminated sheets?

    Thin insulated layers break up the paths for eddy currents, reducing wasted energy.

Summary

  • Lenz's law: the induced current opposes the change in flux. It follows from conservation of energy.
  • Motional EMF of a rod: ε = B L v (when v, B and the rod are mutually perpendicular).
  • The current in a closed circuit is I = ε / R; the retarding force is B I L and the mechanical power equals the electrical power.
  • Eddy currents are induced loops in bulk metal; they brake, heat and waste energy.

Next: Generators and Motors