Skip to content
Tutorials Center
My learning

Topics

Lesson 12 of 38 · Electric Potential and Capacitors

Capacitance and Capacitors

Learn what a capacitor is, define capacitance C = Q/V, derive C = ε0 A/d for parallel plates, and calculate with Python examples.

A capacitor stores electric charge and energy. It is found in camera flashes, touchscreens, power supplies, radio tuners and almost every circuit board. The simplest capacitor is two conducting plates separated by a gap. When you connect it to a battery, charge flows onto one plate and off the other, leaving equal and opposite charges +Q and -Q.

Definition of capacitance

The voltage V between the plates is proportional to the charge Q stored. The ratio is the capacitance:

Text
C = Q / V        unit: farad (F), 1 F = 1 C/V

C depends only on the geometry of the capacitor (plate size, shape, spacing) and the material between the plates, not on Q or V. One farad is very large. Real capacitors are measured in microfarads (µF), nanofarads (nF) and picofarads (pF). (Supercapacitors reach hundreds of farads.)

The parallel-plate capacitor

Take two plates of area A with a gap d between them (small compared with the plate size) and vacuum or air in between. The plates have charge density σ = Q/A. From Gauss's law the field between them is

Text
E = σ/ε₀ = Q / (ε₀ A)

and the voltage is V = E d = Q d / (ε₀ A). So

Text
C = ε₀ A / d

Larger plates increase C; a smaller gap increases C. With ε₀ = 8.854 × 10⁻¹² F/m.

Python Parallel-plate capacitance

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

You can see why 1 farad is huge: a flat air-gap capacitor of that size would be about 10 km on a side. Real capacitors use thin films, rolled layers or porous materials to pack large area into a small volume.

Charging a capacitor

Connect a capacitor to a battery with voltage V. Charge flows until the capacitor voltage equals the battery voltage, then stops. The stored charge is Q = CV.

Worked example: a 220 µF capacitor connected to a 12 V battery stores Q = 220e-6 × 12 = 2.64 × 10⁻³ C. The field between plates with gap 0.50 mm is E = V/d = 12/0.0005 = 24,000 V/m.

Python Charge, voltage and field of a capacitor

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The charge is proportional to voltage, a straight line through the origin, and the slope is C.

A capacitor has a maximum voltage rating. Above it the insulator between the plates breaks down and the device can be damaged. Air breaks down at roughly 3 × 10⁶ V/m.

Other shapes

Capacitor Capacitance
Parallel plates ε₀ A / d
Isolated sphere of radius R 4π ε₀ R
Two concentric spheres (radii a < b) 4π ε₀ a b / (b - a)
Coaxial cylinders, length L 2π ε₀ L / ln(b/a)

The pattern is always ε₀ times a length. Notice that Earth, a sphere with radius 6.37 × 10⁶ m, has a capacitance of about 7 × 10⁻⁴ F, or 0.7 mF.

Python Capacitance of other shapes

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. What is the capacitance if 6.0 µC is stored at 3.0 V?

    C = Q/V = 6.0 µC / 3.0 V = 2.0 µF.
  2. 2. If the plate separation of a parallel-plate capacitor is doubled, the capacitance

    C = ε₀A/d is inversely proportional to d.
  3. 3. Which quantity does NOT change C of a given capacitor?

    C depends on geometry and material; Q simply changes in proportion to V.
  4. 4. The unit farad equals

    C = Q/V, so 1 F = 1 C/V.

Summary

  • C = Q/V, unit farad; it depends on geometry and the material between the plates.
  • Parallel plates: C = ε₀ A / d; field between plates E = V/d = Q/(ε₀A).
  • A capacitor connected to a battery stores Q = CV.
  • Typical values are pF to mF; one farad is huge.

Next: Capacitors in Series and Parallel