Skip to content
Tutorials Center
My learning

Topics

Lesson 17 of 38 · Current and Resistance

Resistivity and Temperature

Learn how a wire's resistance depends on length, area and material with R = ρL/A, and how resistivity changes with temperature, using Python examples.

A long thin wire resists current more than a short thick one. Copper wire carries power cheaply; the heating element of a toaster is made of a much more resistive alloy. In this lesson you separate what depends on the shape of a conductor (length and cross-section) from what depends on the material (resistivity), and see how temperature changes things.

Resistance of a wire

For a uniform wire of length L and cross-sectional area A,

Text
R = ρ L / A

where ρ (Greek rho) is the resistivity of the material, in ohm-meters (Ω·m). It is a property of the material, not the shape.

  • Double L: double R (more collisions on the way).
  • Double A: half R (more paths in parallel).
  • Larger ρ: larger R.

Typical resistivities at about 20 °C (approximate values):

Material ρ (Ω·m) Type
Silver 1.6 × 10⁻⁸ conductor
Copper 1.7 × 10⁻⁸ conductor
Aluminum 2.8 × 10⁻⁸ conductor
Iron 1.0 × 10⁻⁷ conductor
Nichrome (heating wire) 1.1 × 10⁻⁶ alloy
Pure silicon about 2.3 × 10³ semiconductor
Glass 10¹⁰ to 10¹⁴ insulator

Resistivity spans more than 20 orders of magnitude, a bigger range than almost any other property in physics.

Python Resistance of wires

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The copper cable has a very small resistance (about 0.11 Ω), but the nichrome coil has about 44 Ω, so it gets hot when current flows, which is exactly what a heater needs.

Conductivity

The conductivity is the reciprocal of resistivity: σ = 1/ρ, in siemens per meter (S/m). People who work with materials often quote conductivity, those who work with circuits more often quote resistivity. It is the same information.

Resistivity and temperature

For metals, resistivity rises with temperature because the lattice vibrates more and the electrons scatter more. Over modest ranges the change is nearly linear:

Text
ρ(T) = ρ₀ [1 + α (T - T₀)]
R(T) = R₀ [1 + α (T - T₀)]

where α is the temperature coefficient of resistivity. For copper α ≈ 3.9 × 10⁻³ per °C, for tungsten α ≈ 4.5 × 10⁻³ per °C near room temperature. This linear model works for small changes. Over thousands of degrees it is only a rough guide.

Semiconductors behave the opposite way: their resistance usually falls as temperature rises, because more carriers are freed. Their α is negative. Thermistors use this to measure temperature.

Python Copper wire resistance at different temperatures

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Between 20 °C and 100 °C the resistance rises by about 31%, which matters for precision circuits and for long cables that heat up.

A filament lamp

A tungsten lamp filament runs at about 2500 °C or more. Using the linear formula with room-temperature α would suggest a rise in resistance of around twelve times, which is in the right range (real lamps show roughly ten to fifteen times, but the linear rule is not exact at such temperatures). That explains the large switch-on current mentioned in the previous lesson.

Superconductors

Some materials, when cooled below a critical temperature, drop to zero resistance. Mercury does this at about 4.2 K. Certain ceramics do it above 77 K, the boiling point of liquid nitrogen. Superconducting coils make the strong magnetic fields in MRI scanners.

Python Which wire for the job? A comparison

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

For the same resistance, aluminum needs about 1.7 times the cross-section of copper, yet it has less than half the mass. That is why overhead power lines are often aluminum.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. A wire is stretched to twice its length at constant volume (so its area halves). Its resistance becomes

    L doubles and A halves, so R = ρL/A is multiplied by 2 × 2 = 4.
  2. 2. Which factor does NOT affect the resistivity of a pure metal?

    Resistivity is a material property; length appears separately in R = ρL/A.
  3. 3. A copper wire has resistance 5.0 Ω at 20 °C. At 80 °C (α = 3.9 × 10⁻³ per °C) it is about

    R = 5.0 [1 + 0.0039 × 60] ≈ 6.2 Ω.
  4. 4. The resistance of a typical semiconductor as temperature rises usually

    More charge carriers are freed, so resistance falls.

Summary

  • R = ρL/A; ρ (Ω·m) is a material property, σ = 1/ρ.
  • Resistivity ranges from about 10⁻⁸ (metals) to 10¹⁴ Ω·m (insulators).
  • For metals R(T) = R₀ [1 + α(T - T₀)]; for semiconductors resistance falls as T rises.
  • Superconductors have zero resistance below a critical temperature.

Next: Electric Power and Energy