Skip to content
Tutorials Center
My learning

Topics

Lesson 30 of 38 · Electromagnetic Induction

Inductance and LR Circuits

Learn self-inductance, the inductance of a solenoid, energy stored in a magnetic field, and how current grows and decays in an LR circuit with the time constant L/R.

A capacitor stores energy in an electric field and resists sudden changes in voltage. Its magnetic cousin is the inductor, a coil of wire that stores energy in a magnetic field and resists sudden changes in current. Inductors smooth power supplies, filter radio signals, and cause the spark you sometimes see when a heavy-duty switch is opened.

In this lesson you will define inductance, calculate it for a solenoid, find the energy stored, and study how current rises and falls in a circuit with an inductor and a resistor.

Self-inductance

When the current in a coil changes, its own magnetic flux changes, and by Faraday's law an EMF is induced in the coil itself. This is called self-induction. By Lenz's law the induced EMF opposes the change in current.

The flux through a coil is proportional to the current that makes it: N Φ = L I. The constant L is the inductance, measured in henries (H): 1 H = 1 V·s/A. Combining with Faraday's law gives the working equation:

Text
ε = -L dI/dt

A rapid change of current makes a large opposing EMF; a steady current makes none. So in steady DC an ideal inductor acts like a plain wire, while at the instant of a sudden change it acts like a break in the circuit.

Inductance of a solenoid

The field inside a long solenoid is B = μ₀ n I, with n = N / ℓ. The flux linkage is N Φ = N B A = μ₀ N² A I / ℓ, so

Text
L = μ₀ N² A / ℓ

Inductance grows with the square of the number of turns, because more turns both make more field and link it more times. Putting a magnetic core inside multiplies L by the relative permeability.

Worked example

A solenoid has N = 500 turns, length ℓ = 0.20 m and cross-sectional area A = 4.0×10⁻⁴ m².

L = 4π×10⁻⁷ × 500² × 4.0×10⁻⁴ / 0.20 ≈ 6.3×10⁻⁴ H, about 0.63 mH.

Python Inductance of solenoids

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

(Doubling the turns in the same length gives four times the inductance, as the formula predicts.)

Energy stored in an inductor

To build up a current I in a coil, the source has to push charge against the opposing EMF. The work done is stored in the magnetic field:

Text
U = ½ L I²

This is the magnetic counterpart of ½ C V² for a capacitor. For our 0.63 mH solenoid at 2.0 A, U = 0.5 × 6.3×10⁻⁴ × 4.0 ≈ 1.3×10⁻³ J. Per unit volume the energy density in a magnetic field B is B² / (2 μ₀).

LR circuits: growth of current

Connect a battery (ε), resistor (R) and inductor (L) in series, then close the switch at t = 0. The loop rule gives ε = I R + L dI/dt. The solution is similar to the RC case:

Text
I(t) = (ε / R)(1 - e^(-t/τ)),    τ = L / R

The current does not jump to ε / R; the inductor's opposing EMF slows it down. After one time constant τ = L/R, the current has reached about 63.2% of its final value ε / R. The voltage across the inductor is V_L = ε e^(-t/τ): at t = 0 it equals the whole EMF (the inductor acts like an open switch), and it decays to zero (the inductor acts as a wire).

LR circuits: decay of current

Once the current is flowing, replace the battery with a plain wire loop (switch the battery out). The current continues for a while through the resistor, driven by the inductor's stored energy:

Text
I(t) = I₀ e^(-t/τ)

All the stored energy ½ L I₀² ends up as heat in the resistor.

flowchart LR
  A["Switch closes"] --> B["Current rises: τ = L/R"]
  B --> C["Steady current ε/R"]
  C --> D["Switch to wire loop"]
  D --> E["Current decays: I = I₀ e^(-t/τ)"]

Growth and decay of current in an LR circuit.

Python Current growth and decay in an LR circuit

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Why switches spark

Suppose you suddenly break the circuit of a big inductor. The current drops in a tiny fraction of a second, so dI/dt is huge and so is the EMF L dI/dt. That EMF can be many times the supply voltage, enough to make an arc across the opening switch. Engineers protect circuits by adding a flyback diode across a relay coil or a motor winding, giving the current a safe path to continue. Car ignition coils use the same effect deliberately, to make the high voltage for a spark plug.

Python EMF when current is switched off quickly

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

This simply applies ε = L ΔI/Δt to a straight-line fall of current. Real arcs and diodes behave in more complicated ways.

Common mistakes

  • Thinking an inductor blocks DC for ever. It resists changes; after a few time constants it carries steady current like a wire.
  • Confusing time constants: the LR one is L / R, the RC one is R C.
  • Forgetting that inductance is proportional to N², not N.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. The current in a 0.50 H inductor changes uniformly from 0 to 4.0 A in 0.20 s. What is the magnitude of the induced EMF?

    ε = L ΔI/Δt = 0.50 × 4.0 / 0.20 = 10 V.
  2. 2. What is the time constant of an LR circuit with L = 0.20 H and R = 40 Ω?

    τ = L / R = 0.20 / 40 = 5.0×10⁻³ s = 5.0 ms.
  3. 3. How much energy is stored in a 2.0 mH inductor carrying 3.0 A?

    U = ½ L I² = 0.5 × 2.0×10⁻³ × 9.0 = 9.0×10⁻³ J.
  4. 4. At the instant the switch is closed in a series LR circuit with an uncharged inductor, the current is…

    The inductor's induced EMF opposes the change, so the current starts at zero and grows.

Summary

  • Self-inductance: ε = -L dI/dt; the unit of L is the henry.
  • Solenoid: L = μ₀ N² A / ℓ.
  • Energy stored: U = ½ L I².
  • LR circuit time constant: τ = L / R; current grows as (ε/R)(1 - e^(-t/τ)) and decays as I₀ e^(-t/τ).
  • Suddenly interrupting a current in an inductor produces a large EMF.

Next: Alternating Current: Peak, RMS and Phase