Skip to content
Tutorials Center
My learning

Topics

Lesson 10 of 38 · Electric Potential and Capacitors

Electric Potential Energy and Potential

Learn electric potential energy U = kq1q2/r, electric potential V = kQ/r, the volt and the electron-volt, with energy-conservation examples in Python.

Forces tell you how things accelerate. Energy often tells you the answer faster, especially for speeds. You already know gravitational potential energy: lifting a mass stores energy. Electric forces work the same way. Moving a charge against an electric force stores electric potential energy, and releasing it turns that energy into motion. Dividing by the charge gives electric potential, whose unit is the volt.

Potential energy of two point charges

For two point charges q₁ and q₂ a distance r apart, the electric potential energy (taking zero at infinite separation) is

Text
U = k q₁ q₂ / r

The sign matters. Like charges give U > 0: you must do work to bring them together. Opposite charges give U < 0: they are "bound", and you must do work to pull them apart. For a system of several charges, add U over every pair.

Python Potential energy of a group of charges

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The total is the work you would need to do to assemble the charges from far away.

Electric potential

The electric potential V at a point is the potential energy per unit charge:

Text
V = U / q        unit: volt, 1 V = 1 J/C

For a point charge Q, the potential at distance r is

Text
V = k Q / r

It is a scalar, not a vector: add the potentials from several charges as ordinary numbers (with signs). That makes it much easier than adding field vectors.

Potential and potential energy are different. V belongs to the source charges and a place in space; U = qV is the energy of a particular charge q placed there.

Potential difference and the voltage on a battery

Only differences in potential matter physically (the zero is your choice). The potential difference between two points is ΔV = V_B - V_A. A charge q moving from A to B changes its potential energy by

Text
ΔU = q ΔV

A 9 V battery gives each coulomb of charge 9 J of energy as it goes round the circuit. Positive charges "fall" from high to low potential, as a ball falls from high to low height. Negative charges go the other way, toward higher V.

The electron-volt

On atomic scales, joules are inconveniently large. The electron-volt (eV) is the energy gained by one elementary charge accelerated through one volt:

Text
1 eV = 1.602176634 × 10⁻¹⁹ J

Typical values: visible light photons carry 1.6 to 3.3 eV, and ionizing hydrogen takes 13.6 eV.

Energy conservation: speed from voltage

If a charge starts at rest and moves through a potential difference V with only electric forces acting, then qV = ½mv² (for speeds well below the speed of light):

Text
v = √(2 q V / m)
Python Speed of a particle accelerated by a voltage

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

At 100 V the electron reaches about 5.9 × 10⁶ m/s. At 10 kV the non-relativistic formula starts to give a noticeably too large speed (about 20% of c), so use relativity for faster particles.

Worked example: two charges approaching

A proton is shot straight toward a fixed second proton from far away with kinetic energy 1.0 MeV. How close does it get? At the closest point all kinetic energy has become potential energy:

k e² / r = 1.0 × 10⁶ eV × 1.602 × 10⁻¹⁹ J/eV, so r = 8.99e9 × (1.602e-19)² / 1.602e-13 ≈ 1.44 × 10⁻¹⁵ m.

Python Closest approach

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

That is about the size of a nucleus, which is how early experiments probed atomic nuclei.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. The unit volt is equal to

    Potential is energy per unit charge.
  2. 2. The potential 0.50 m from a +5.0 nC point charge is about

    V = 8.99e9 × 5e-9 / 0.5 ≈ 90 V.
  3. 3. How much energy does a 2.0 C charge gain going through 12 V?

    ΔU = qΔV = 2.0 × 12 = 24 J.
  4. 4. An electron-volt is

    1 eV is the energy gained by an elementary charge through 1 V.

Summary

  • U = k q₁ q₂ / r for point charges; add over all pairs.
  • V = kQ/r is a scalar; V = U/q; unit volt (J/C).
  • ΔU = qΔV; 1 eV = 1.602 × 10⁻¹⁹ J.
  • Use qV = ½mv² to find speeds (non-relativistic).

Next: Equipotentials and the Field from Potential